The purpose of this study is to analyze the distribution characteristics of mist spray particle size by devising a rotary mist spraying device to develop the evaporative salt water desalination system. The rotary mist spraying device was consisted of a BLDC sirocco fan, a spinning fan, a fan fixed shaft and a salt water supply device etc. In this study we analyzed the characteristics of spray particle size and distribution according to the variation of sirocco fan surface roughness(Ra, μm), revolutions(rpm) and salt water flow rate(mL/min). When sirocco fan surface roughness( Ra) was in the range of 0.27~7.65 μm, the spray particle size was 0.117~1.360 μm. And then more than 90% of spray particles were found to be less than 0.50 μm. When sirocco fan surface roughness(Ra) was in the range of 12.70~22.84 μm, the spray particle size was 2.51~184.79 μm and more than 98% of spray particles were found to be less than 13.59 μm. To analyze the effect of fan rotation speed on the size and distribution of spray particles, when surface roughness Ra was fixed 0.27 μm and fan rotation speed and salt water flow rate was respectively changed at 3,800~5,600 rpm and 2.77~8.28 mL/min, spray particle size was 0.341~0.541 μm. And when salt water flow rate was 9.74 mL/min and fan rotation speed was 3,800~5,200 rpm, spray particle size was in the range of 29.29~341.46 μm and in case of 5,600 rpm more than 98.23% of spray particles were in the range of 2.51~13.59 μm.

In the agriculture of strawberry cultivation, it is necessary to loosening and breaking up of the intertwined coco peat and strawberry root in order to cultivate strawberry again. The main objective of this study is to design and analyze the structure of strawberry rotary device for using breaking up of coco peat and strawberry root. In order to perform crushing coco peat on the bed, the rotary device was designed under the weigh 20kg with the speed 11.75m/min, and it can operate on bed width from 250~310mm. Due to different depth of bed, the body of device also was designed screw holder to adjust the hight from 0~120mm. To evaluate the safety of structure, body device was analyzed in static and free vibration state by using Abaqus program. The device was applied maximum load 1177.2N, and the maximum equivalent stress was reached 41.9MPa. The free vibration analysis of two rotating cutter showed minimum natural frequency mode 338.58Hz and 339.9Hz. The results indicate that the designed rotary device was satisfied and has enough strength under design and simulation conditions.