This study presents a rapid and sequential radiochemical separation method for Pu and Am isotopes in radioactive waste samples from the nuclear power plant with anion exchange resin and TRU resin. After radionuclides were leached from the radioactive waste samples with concentrated HCl and HNO3, the sample was allowed to evaporate to dryness after filtering the leaching solution with 0.45 micron filter. The Pu isotopes were separated in HNO3 medium with anion exchange resin. For leaching solution passed through anion exchange column, the Am isotopes were separated with TRU resin. The purified Pu and Am isotopes were measured by alpha spectrometer, respectively, after micro-precipitation of neodymium. The sequential radiochemical separation of Pu and Am isotopes in radioactive waste samples using anion exchange resin and TRU resin was validated with ICP-MS system.

To achieve permanent disposal of radioactive waste drums, the radionuclides analysis process is essential. A variety of waste types are generated through the operation of nuclear facilities, with dry active waste (DAW) being the most abundant. To perform radionuclides analysis, sample pretreatment technology is required to transform solid samples into solutions. In this study, we developed a dry ashing-microwave digestion method and secured the reliability of the analysis results through a validity evaluation. Additionally, we conducted a comparative analysis of the radioactivity of 94Nb nuclides with and without the chemical separation process, which reduced the minimum detectable activity (MDA) level by more than 65-fold for a certain sample.

This study presents a rapid and quantitative sequential separation method for H-3 and C-14 isotopes with distillation apparatus in environmental samples released from nuclear facilities. After adding 200 mg of granulated potassium permanganate and 500 mg of sodium hydroxide in 100 mL of sample solution, the sample solution was heated until approximately 10 mL of distillate, and the distillate fraction was removed. The sample solution was heated again until a minimum 10 mL of additional distillate was collected. 10 mL of distillate was transferred to the LSC vail and the measurement sample for H-3 was made by adding 10 mL of Ultima Gold LLT to the LSC vial. After adding 2.5 g of potassium persulfate, 2 mL of 1M silver nitrate and 15 mL of concentrated nitric acid to the remained sample solution, the sample solution was heated for 90 minutes and C-14 isotopes were adsorbed into 10 mL of Carbo-Sorb solution in glass vial. The measurement sample for C-14 was made by adding 10 mL of Permafluor to the C-14 fraction in glass vial. The purified H-3 and C-14 samples were measured by the liquid scintillation counter after quenching correction. The average recoveries of H-3 and C-14 with CRM were measured to be 96% and 85%, respectively. The sequential separation method for H-3 and C-14 investigated in this study was applied to activated charcoal filter produced from nuclear power plants after validating the reliability by result of proficiency test (KOLAS-KRISS, PT-2021-51).