MnO2 can be potentially utilized as an electrode material for redox capacitors. The deposition of MnO2 with poor electrical conductivity onto porous carbons supplies them with additional conductive paths; as a result, the capacitance of the electrical double layer formed on the porous carbon surface can be utilized together with the redox capacitance of MnO2. However, the obtained composites are not generally suitable for industrial production because they require the use of expensive porous carbons and/or inefficient fabrication methods. Thus, to develop an effective preparation procedure of the composite, a suitable structure of porous carbons must be determined. In this study, MnO2/C composites have been prepared from activated carbon gels with various pore sizes, and their electrical properties are investigated via cyclic voltammetry. In particular, mesoporous carbons with a pore size of around 20 nm form a composite with a relatively low capacitance (98 F/g-composite) and poor rate performance despite the moderate redox capacitance obtained for MnO2 (313 F/g-MnO2). On the other hand, using macro-porous carbons with a pore size of around 60 nm increases the MnO2 redox capacitance (399 F/g-MnO2) as well as the capacitance and rate performance of the entire material (203 F/g-composite). The obtained results can be used in the industrial manufacturing of MnO2/C composites for supercapacitor electrodes from the commercially available porous carbons.

Effective processing and use of coal slime is of great significance to protect the environment and save resources. Different coal slimes (untreated with 43 wt% ash content, crushed and flotation treated with 10 wt% ash content, and pre-carbonized) were activated with KOH to prepare porous activated carbon. The results show the activated carbon prepared from coal slime with 10 wt% ash had high specific surface area (3037 m2/ g) and pore volume (1.66 cm3/ g), which was ascribed to the suitable contents of minerals as template and oxygen-containing functional groups. Electrochemical measurements exhibited the best specific capacitance of 220 F/g at 0.1 A/g and the cycle stability of over 100% capacitance retention after 1000 cycles at 5 A/g in 6 M KOH solution. Due to the high specific surface area, superior electrochemical performance, and facile and low cost, developing highly porous activated carbon for supercapacitors is one alternative way for effective use of coal slime waste.

The pitch-based activated carbons were prepared with KOH/KMnO4 as a multiple function activation agent to increase the specific capacitance of a supercapacitor electrode active material. And the porous structure and electrochemical properties of activated carbon were analyzed on varying amounts of KMnO4. KMnO4 was decomposed into K2O, MnO, and O2 at the activation temperature of KOH, and MnO was introduced to activated carbon. K2O/ O2 reacts with a surrounding pitch to generate micropores and forms a pathway that exposes MnO to the outside. It also affects to the specific surface area of activated carbon like KOH chemical activation. The enhanced specific surface area and introduced MnO in activated carbon led to a 28.9% increase in specific capacitance.

Zinc-ion hybrid supercapacitors (ZICs) have recently been spotlighted as energy storage devices due to their high energy and high power densities. However, despite these merits, ZICs face many challenges related to their cathode materials, activated carbon (AC). AC as a cathode material has restrictive electrical conductivity, which leads to low capacity and lifetime at high current densities. To overcome this demerit, a novel boron (B) doped AC is suggested herein with improved electrical conductivity thanks to B-doping effect. Especially, in order to optimize B-doped AC, amounts of precursors are regulated. The optimized B-doped AC electrode shows a good charge-transfer process and superior electrochemical performance, including high specific capacity of 157.4 mAh g−1 at current density of 0.5 A g−1, high-rate performance with 66.6 mAh g−1 at a current density of 10 A g−1, and remarkable, ultrafast cycling stability (90.7 % after 10,000 cycles at a current density of 5 A g−1). The superior energy storage performance is attributed to the B-doping effect, which leads to an excellent charge-transfer process of the AC cathode. Thus, our strategy can provide a rational design for ultrafast cycling stability of next-generation supercapacitors in the near future.

Energy and environmental are always two major challenges for the sustainable development of the modern human being. For avoiding the serious environmental pollution caused in the fabrication process of porous carbon, a popular energy storage material, we reported a facile, green and activating agent free route hereby directly carbonizing a special biomass, Glebionis coronaria. A nitrogen doped hierarchical porous carbon with a specific surface area of up to 1007 m2 g−1 and a N doping content of up to 2.65 at.% was facilely fabricated by employing the above route. Benefiting from the peculiarly hierarchical porous morphology, enhanced wettability and improved conductivity, the obtained material exhibits superior capacitance performance, which capacitance reaches up to 205 F g−1 under two-electrode configuration, and no capacitance loss is observed after 5000 cycles. Meanwhile, the capacitance retention of the obtained material arrives up to 95.0% even under a high current density of 20 A g−1, illuminating its excellent rate capability. The fabricated nitrogen-doped hierarchical porous carbon with larger capacitance than commercial activated carbon, excellent rate capability and cycle stability is an ideal cost-efficient substitution of commercial activated carbon for supercapacitor application.

The performance of Li-ion hybrid supercapacitors (asymmetric-type) depends on many factors such as the capacity ratio, material properties, cell designs and operating conditions. Among these, in consideration of balanced electrochemical reactions, the capacity ratio of the negative (anode) to positive (cathode) electrode is one of the most important factors to design the Li-ion hybrid supercapacitors for high energy storing performance. We assemble Li-ion hybrid supercapacitors using activated carbon (AC) as anode material, lithium manganese oxide as cathode material, and organic electrolyte (1 mol L−1 LiPF6 in acetonitrile). At this point, the thickness of the anode electrode is controlled at 160, 200, and 240 μm. Also, thickness of cathode electrode is fixed at 60 μm. Then, the effect of negative and positive electrode ratio on the electrochemical performance of AC/LiMn2O4 Li-ion hybrid supercapacitors is investigated, especially in the terms of capacity and cyclability at high current density. In this study, we demonstrate the relationship of capacity ratio between anode and cathode electrode, and the excellent electrochemical performance of AC/LiMn2O4 Li-ion hybrid supercapacitors. The remarkable capability of these materials proves that manipulation of the capacity ratio is a promising technology for high-performance Li-ion hybrid supercapacitors.

인류의 에너지 수급은 항상 인간의 삶에 중요한 문제이며, 최근에는 전기 생산 및 공급 문제로 이어지고 있다. 이에 관련하여 본 연구에서는 에너지 저장장치의 일환으로 슈퍼커패시터 용도의 고체 전해질막을 제조하였다. 제조한 전해질막 은 poly(vinyl alcohol) (PVA) 주사슬에 poly(oxyethylene methacrylate) (POEM) 곁사슬을 그래프팅하여 사용하였으며, 그래프팅은 자유 라디칼 중합법을 통해 합성하였다. 본 연구에서 사용한 PVA-g-POEM 가지형 공중합체를 슈퍼커패시터 전해질에 적용한 사례는 처음이다. POEM 그래프팅을 통해 PVA가 고유하게 가지고 있던 구조가 변화하였으며, 이를 FT-IR을 통해 분석하였다. 또한, 합성한 공중합체를 이용한 슈퍼커패시터 성능은 cyclic voltammetry (CV), galvanostatic charge/discharge (GCD), ragone plot 등을 통해 분석하였다. 이를 통해 기존에 수계 전해질로 PVA 단일 고분자만 사용하던 분야에 그래프팅 방법이라는 새로운 접근법을 제시하였다.

Zn-ion supercapacitors (ZICs) show high energy densities with long cycling life for use in electronic devices. Porous Zn electrodes as anodes for ZICs are fabricated by chemical etching process using optimized conditions. The structures, morphologies, chemical bonding states, porous structure, and electrochemical behavior are examined. The optimized porous Zn electrode shows a root mean square of roughness of 173 nm and high surface area of 153 μm2. As a result, ZIC using the optimized porous Zn electrode presents excellent electrochemical performance with high specific capacitance of 399 F g−1 at current density of 0.5 A g−1, high-rate performance (79 F g−1 at a current density of 10.0 A g−1), and outstanding cycling stability (99 % after 1,500 cycles). The development of energy storage performance using synergistic effects of high roughness and high surface area is due to increased electroactive sites by surface functionalization of Zn electrode. Thus, our strategy will lead to a rational design and contribute to next-generation supercapacitors in the near future.

Sustainable biomass-derived porous carbons demonstrate excellent capacitive properties owing to their heteroatom-rich nature and distinct textural feature. Herein, a series of nitrogen-/phosphorus-/oxygen-containing microporous carbons (CWWN/ P/O-MPCs) have been successfully fabricated by etching in H2O2 solution, pre-treatment of camphor wood wastes with KOH solution and subsequent carbonization. As an electrode material for supercapacitors, the typical microporous carbon (CWW-N/P/O-MPCs-0.5) exhibits a remarkably high specific capacitance of 245 F g− 1 at 0.5 A g− 1, corresponding to an impressively large volumetric capacitance of 208 F m− 3, and excellent long-term stability over 10,000 cycles. The excellent electrochemical performance can be ascribed to the optimal combination of heteroatom groups and ultrafine micropores.

본 연구에서는 녹말(starch)과 poly(acrylonitrile) (PAN)으로 이루어진 가지형 공중합체 기반의 슈퍼 캐퍼시터용 전해질막을 손쉽게 제조하는 방법을 제시하였다. 가지형 공중합체(starch-g-PAN)는 세륨 이온에 의해 개시된 자유 라디칼 중합을 통해 합성되었다. 실온에서 어떠한 유기용매 없이 Starch-g-PAN 고분자를 이온성 액체, 1-ethyl-3-methylimidazolium dicyanamide (EMIM DCA)에 용해하였으며 1시간 동안 100°C의 고온을 가해줌으로써 손쉽게 고분자 막을 만들었다. 제조된 막은 유연하여 플렉서블 고체 슈퍼 캐퍼시터의 전해질에 적용되었다. Starch-g-PAN 기반의 고분자 전해질막을 사용한 슈퍼 캐퍼시터는 0.5 A/g의 전류 밀도에서 약 21 F/g의 정전용량을 가졌으며 10,000 사이클 동안 86%의 유지율을 보이며 높은 주기 안정성을 보였다. 본 연구를 통해 starch-g-PAN 기반의 고분자 전해질막이 우수한 성능을 가진 플렉서블 고체 슈퍼 캐퍼시터에 응용될 수 있음을 확인하였다.

Hierarchically porous, chemically activated carbon materials are readily derived from biomass using hydrothermal carbonization (HTC) and chemical activation processes. In this study, empty fruit bunches (EFB) were chosen as the carbon source due to their sustainability, high lignin-content, abundance, and low cost. The lignin content in the EFB was condensed and carbonized into a bulk non-porous solid via the HTC process, and then transformed into a hierarchical porous structure consisting of macro- and micropores by chemical activation. As confirmed by various characterization results, the optimum activation temperature for supercapacitor applications was determined to be 700°C. The enhanced capacitive performance is attributed to the textural property of the extremely high specific surface area of 2861.4 m2 g–1. The prepared material exhibited hierarchical porosity and surface features with oxygen functionalities, such as carboxyl and hydroxyl groups, suitable for pseudocapacitance. Finally, the as-optimized nanoporous carbons exhibited remarkable capacitive performance, with a specific capacitance of 402.3 F g–1 at 0.5 A g–1, a good rate capability of 79.8% at current densities from 0.5 A g–1 to 10 A g–1, and excellent life cycle behavior of 10,000 cycles with 96.5% capacitance retention at 20 A g–1.

Interconnected meso/microporous activated carbons were prepared from pumpkin seeds using a simple chemical activation method. The porous carbon materials were prepared at different temperatures (PS-600, PS-700, PS-800, and PS-900) and demonstrated huge surface areas (645–2029 m2 g–1) with excellent pore volumes (0.27–1.30 cm3 g–1). The wellcondensed graphitic structure of the prepared activated carbon materials was confirmed by Raman and X-ray diffraction analyses. The presence of heteroatoms (O and N) in the carbon materials was confirmed by X-ray photoemission spectroscopy. High resolution transmission electron microscopic images and selected area diffraction patters further revealed the porous structure and amorphous nature of the prepared electrode materials. The resultant porous carbons (PS-600, PS-700, PS-800, and PS-900) were utilized as electrode material for supercapacitors. To our delight, the PS-900 demonstrated a maximum specific capacitance (Cs) of 303 F g–1 in 1.0 M H2SO4 at a scan rate of 5 mV. The electrochemical impedance spectra confirmed the poor electrical resistance of the electrode materials. Moreover, the stability of the PS-900 was found to be excellent (no significant change in the Cs even after 6000 cycles).

In the present work, graphene powder was synthesized by laser scribing method. The resultant flexible light-scribed graphene is very appropriate for use in micro-supercapacitors. The effect of the laser scribing process in reducing graphene oxide (GO) was investigated. GO was synthesized using a chemical mixture of GO solution; then, it was coated onto a LightScribe DVD disk and laser scribed to reduce GO and create laser-scribed graphene (LSG). The CV curves of pristine rGO at various scan rates showed that the ultimate product possesses the ability to store energy at the supercapacitor level. Charge-discharge curves of pristine rGO at two different current densities indicated that the specific capacitance (Cm) increases due to the reduction of the discharge current density. Finally, the long-term charge-discharge stability of the LSG was plotted and indicates that the specific capacitance decreases very slightly from its primary capacitance of ~10F cm−3 and that the cyclic stability is favorable over 1000 cycles.

In this study, we intensively investigated the effect of conductive additive amount on electrochemical performance of organic supercapacitors. For this purpose, we assembled coin-type organic supercapacitor cells with a variation of conductive additive(carbon black) amount; carbon aerogel and polyvinylidene fluoride were employed as active material and binder, respectively. Carbon aerogel, which is a highly mesoporous and ultralight material, was prepared via pyrolysis of resorcinolformaldehyde gels synthesized from polycondensation of two starting materials using sodium carbonate as the base catalyst. Successful formation of carbon aerogel was well confirmed by Fourier-transform infrared spectroscopy and N2 adsorptiondesorption analysis. Electrochemical performances of the assembled organic supercapacitor cells were evaluated by cyclic voltammetry, galvanostatic charge/discharge, and electrochemical impedance spectroscopy measurements. Amount of conductive additive was found to strongly affect the charge transfer resistance of the supercapacitor electrodes, leading to a different optimal amount of conductive additive in organic supercapacitor electrodes depending on the applied charge-discharge rate. A high-rate charge-discharge process required a relatively high amount of conductive additive. Through this work, we came to conclude that determining the optimal amount of conductive additive in developing an efficient organic supercapacitor should include a significant consideration of supercapacitor end use, especially the rate employed for the charge-discharge process.

The development of nanostructured functional materials derived from biomass and/or waste is of growing importance for creating sustainable energy-storage systems. In this study, nanoporous carbonaceous materials containing numerous heteroatoms were fabricated from waste coffee grounds using a top-down process via simple heating with KOH. The nanoporous carbon nanosheets exhibited notable material properties such as high specific surface area (1960.1 m2 g–1), numerous redox-active heteroatoms (16.1 at% oxygen, 2.7 at% nitrogen, and 1.6 at% sulfur), and high aspect ratios (>100). These unique properties led to good electrochemical performance as supercapacitor electrodes. A specific capacitance of ~438.5 F g–1 was achieved at a scan rate of 2 mV s–1, and a capacitance of 176 F g–1 was maintained at a fast scan rate of 100 mV s–1. Furthermore, cyclic stability was achieved for over 2000 cycles.