To meet the increased performance and cost requirements of commercial supercapacitor, a N and O self-doped hierarchical porous carbon is fabricated via a green and simple self-activation route utilizing leaves of wild hollyhock as raw materials. Comparing to commercial activated carbon, the reported material exhibits some marked merits, such as simple and green fabrication process, low cost, and superior capacitance performance. The specific surface area of the obtained N and O codoped hierarchical porous carbon arrives 954 m2 g−1, and the content of the self-doped nitrogen and oxygen reaches 2.64 at.% and 7.38 at.%, respectively. The specific capacitance of the obtained material reaches 226 F g− 1 while the specific capacitance of the symmetric supercapacitor arrives 47.3 F g− 1. Meanwhile, more than 90.3% of initial specific capacitance is kept under a current density of 20 A g− 1, and no arresting degradation is observed for capacitance after 5000 times cycle, perfectly demonstrating the excellent cycle and rate capability of the obtained material. The obtained N and O co-doped hierarchical porous carbon are expected to be an ideal substitution for commercial activated carbon.

For solving phase separation of nanoparticles and graphene oxide (GO) in the application process, MgWO4– GO nanocomposites were successfully synthesized using three different dispersants via a facile solvothermal-assisted in situ synthesis method. The structure and morphology of the prepared samples were characterized by X-ray diffraction, Scanning electron microscopy, Transmission electron microscopy, Fourier transform infrared and Raman techniques. The experimental results show that MgWO4 nanoparticles are tightly anchored on the surfaces of GO sheets and the agglomeration of MgWO4 nanoparticles is significantly weakened. Additionally, MgWO4– GO nanocomposites are more stable than self-assembly MgWO4/ GO, which there is no separation of MgWO4 nanoparticles and GO sheets by ultrasound after 10 min. The catalytic results show that, compared with bare MgWO4, MgWO4– GO nanocomposites present better catalytic activities on the thermal decomposition of cyclotetramethylenete tranitramine (HMX), cyclotrimethylene trinitramine (RDX) and ammonium perchlorate (AP). The enhanced catalytic activity is mainly attributed to the synergistic effect of MgWO4 nanoparticles and GO. MgWO4– GO prepared using urea as the dispersant has the smallest diameter and possesses the best catalytic action among the three MgWO4– GO nanocomposites, which make the decomposition temperature of HMX, RDX and AP reduce by 10.71, 11.09 and 66.6 °C, respectively, and the apparent activation energy of RDX decrease by 68.6 kJ mol−1.

Energy and environmental are always two major challenges for the sustainable development of the modern human being. For avoiding the serious environmental pollution caused in the fabrication process of porous carbon, a popular energy storage material, we reported a facile, green and activating agent free route hereby directly carbonizing a special biomass, Glebionis coronaria. A nitrogen doped hierarchical porous carbon with a specific surface area of up to 1007 m2 g−1 and a N doping content of up to 2.65 at.% was facilely fabricated by employing the above route. Benefiting from the peculiarly hierarchical porous morphology, enhanced wettability and improved conductivity, the obtained material exhibits superior capacitance performance, which capacitance reaches up to 205 F g−1 under two-electrode configuration, and no capacitance loss is observed after 5000 cycles. Meanwhile, the capacitance retention of the obtained material arrives up to 95.0% even under a high current density of 20 A g−1, illuminating its excellent rate capability. The fabricated nitrogen-doped hierarchical porous carbon with larger capacitance than commercial activated carbon, excellent rate capability and cycle stability is an ideal cost-efficient substitution of commercial activated carbon for supercapacitor application.

Soybean peptide (SP) exhibited low intestinal absorption at oral administration due to its fragile structure under gastric digestion. Therefore, we have attempted to encapsulate peptide by cross-linkage interaction between positive charged chitosan (CS) or chitosan oligosaccharide (CSO) and negative charged peptide. The CS (or CSO) with SP nanoparticles were prepared by using ultrasonification technique. The objective of this study was to find the optimal processing method by changing concentration, pH, and homogenizing conditions. We measured physicochemical properties such as particle size, zeta-potential, encapsulation efficiency (EE%), release rate (RR) and antioxidant ability of samples. The results showed that the optimal processing method was using 0.5% (w/v) CSO (diluted by pH 3 Acetic acid buffer) mixed with 0.5% (w/v) SP (diluted by pH 6 buffer) by 9:1 ratio. Afterwards, using high-speed mixer at 12,000 rpm for 3 min, and then passed 2 times through an ultrasonicator (50% power, 3 min). In this way for processing, the particle sizes of CSO/SP nanoparticles were approximately 300 nm, zeta-potential were approximately 45 mV. In addition, the EE% and RR of CS/SP nanoparticles was higher than the CSO/SP nanoparticles. The increase in antioxidant ability of SP was attributed to the affected by CS/CSO microcapsules. In conclusion, this research can befoundation for the manufacturing process of CS/SP nanoparticles, and it was expected that the future application of this nanoparticle in food matrix.

Poly(imide p-alkoxycinnamate)s of various alkyl chain lengths were synthesized by esterifying chloromethylated polyimide (CMPI), a synthetic platform for functionalized polyimides. Soluble CMPI, obtained by chloromethylation of soluble polyimide from diaminodiphenylether and 4,4’-(hexafluoroisopropylidene) diphthalic anhydride, was esterified with various p-alkoxycinnamic acids in the presence of base and phase transfer catalyst. The reaction underwent almost quantitatively. The structure of resulting polymer was characterized by 1H-NMR and FT-IR spectroscopic methods. Thin polymer film on a glass substrate was irradiated with polarized UV light, inducing a homogeneous liquid crystal alignment.

요즘 중한 양국 문화 영역의 합작이 심화하고 있다. '원소스 멀티테리토리'모식으로 제작한 중한 영화들을 관객의 주목을 받았다. 하지만 <용하형경>과 <극한직업>이 개봉하면서 양극화 관영 평가와 현격 한 흥행 차이가 생겼다. 따라서 본 논문에서는 두 영화를 중심으로 내러티브, 캐릭터로서 현지화 원소의 운용을 대비하고 분석한다. 같은 스토리는 어떻게 다른 나라의 현지화 사회 문화를 표현할 수 있는 것에 대해 살펴보고 더 우수한 중국 영화를 만들기 위해 현지화 원소의 활용 방법을 총결해야 한다.