본 연구는 다중벽 탄소나노튜브(MWCNT)로 보강된 복합재 구조의 동적 해석을 다루었다. Mori-Tanaka 모델을 기반으 로 MWCNT 중량 비율, 패널의 곡률, 그리고 CNT의 임의 배열이 복합재의 동적거동에 미치는 상호작용을 연구하였다. 본 연구 결과는 CNT의 부피함유비율의 변화에 따른 복합재의 유효탄성계수를 예측하는 기존 문헌결과와 비교하여 검증하였다. 수치해 석 예제는 복합재의 동적 특성을 평가함에 있어서 MWCNT 보강의 불규칙한 배열 또는 기울어진 방향으로 배치된 효과에 대한 중요성을 제시하였다.
We carried out a dynamic instability assessment of carbon nanotube reinforced composite (CNTRC) and carbon nanotubes/fiber/polymer composite (CNTFPC) skew plates based on the high-order shear deformation plate theory (HSDT). The multiscale interactions between carbon nanotube (CNT) ratios and skew angles on the dynamic instability for various length-thickness ratios are studied using a two-dimensional finite element model developed for this study. The results were verified by those reported in the literature show the interactions between the CNT reinforcement and skew angles in the skew laminate. Numerical examples show the importance of CNT reinforcement when assessing the dynamic instability of CNTRC and CNTFPC skew plates.
In this paper. the effects of the aspect ratio on the natural frequency of the advanced composite road structures is studied. The advanced composite structures are too difficult for such design engineers for construction and some simple but accurate enough methods are necessary. Some laminate orientations have decreasing values of , , and stiffnesses as the ply number increases. The plate aspect ratio considered is from 1 to 5. Most of the road structures have large aspect ratios, for such cases further simplification is possible by neglecting the effect of the longitudinal moment terms.
PURPOSES: The purpose of this paper is to demonstrate to the practicing engineers, how to apply the advanced composite materials theory to the road structures. For general construction material used, there is certain theoretical limit in sizes. For super road structure construction, the reduction in panel weight is the first step to take in order to break such size limits. METHODS: For a typical road structures panel, both concrete and advanced composite sandwich panels are considered. The concrete panel is treated as a special orthotropic plate. RESULTS: All types of advanced composite sandwich panels are considered as a self-weights less than one tenth of that of concrete panel. The concrete panel is treated as a special orthotropic plate to obtain more accurate result. CONCLUSIONS: Advanced composite sandwich panels are considered as a self-weights less than one tenth (10%) of that of concrete panel, with deflections less than that of the concrete panel. This conclusion gives good guide line for design of the light weight of road structures.
PURPOSES: This paper aims to give a guideline and the way to apply the advanced composite materials theory to the road structures with different cross sections to the practicing engineers. METHODS: To simple but exact method of calculating natural frequencies corresponding to the modes of vibration of road structures with different cross sections and arbitrary boundary conditions. The effect of the D22 stiffness on the natural frequency is rigorously investigated. RESULTS: Simple method of vibration analysis for calculating the natural frequency of the different cross sections is presented. CONCLUSIONS: Simple method of vibration analysis for calculating the natural frequency of the different cross sections is presented. This method is a simple but exact method of calculating natural frequencies of the road structures with different cross sections. This method is extended to be applied to two dimensional problems including composite laminated road structures.
PURPOSES: Current theories for composite structures are too difficult for design engineers for construction. The purpose of this paper is to demonstrate to the practicing engineers, how to apply the advanced composite materials theory to the road structures. METHODS: Some laminate orientations have decreasing values of D16, B16, D26 and B26 stiffnesses as the ply number increases. The plate aspect ratio considered is from 1 to 5. In order to study the effect of Mx on the equilibrium equations, two cases are considered. Mx term is considered or neglected. RESULTS: Most of the road structures have high aspect ratios, for such cases further simplification is possible by neglecting the effect of the longitudinal moment terms. CONCLUSIONS: Most of the road structures have plate aspect ratios higher than 2. It is concluded that, for all boundary conditions, neglecting the longitudinal moment(Mx) terms is acceptable if the aspect ratio (a/b) is equal to or higher than 2. This conclusion gives good guide line for design of the road structures.
Almost all buildings and infrastructures made of advanced composite materials are fabricated without proper design. Unlike airplanes or automobiles, prototype test is impossible. One cannot destroy 10 story buildings or 100-meter long span bridges. People try to build 100-story buildings or several thousand meter long span bridges. In order to realize "composites in construction", the following subjects must be studied in detail, for his design. Concept optimization, Simple method of analysis, Folded plate theory, Size effects in failure, and Critical natural frequency. Unlike the design procedure with conventional materials, his design should include material design, selection of manufacturing methods, and quality control methods, in addition to the fabrication method. In this paper, concept optimization and folded plate theory are presented for practicing engineers.
In this paper, the relation between the applied load distribution and the natural frequency of vibration of some structural elements is presented. In this paper, the effects of the loading sizes on the natural frequency of vibration of some structural elements is presented. Many junior engineers get confused on such relations. This method extended to two dimensional problems including advanced composite laminated structures. It is hoped that this paper gives some guideline to such junior engineers.
The marine structures with sea water cooling system always expose to the oceanic atmosphere. Therefore, the protection of the equipments is very important. To investigate the effectiveness of advanced composite materials for the application in offshore environments, the tensile test, hardness test, undercutting property test, permeance test and the friction and wear test were carried out by using various applicable coating materials. The main results obtained can be summarized as follows; 1. The micro-hardness of the Archcoat 502B showed the highest value. 2. The coefficient of friction of the Rigspray coating at the speed of 2.21m/sec showed the lowest value, and that of the Archcoat 502B coating at 1.08m/sec and 0.18m/sec indicated the lowest values. 3. The wear mass at the speed of 0.18m/sec and 1.08m/sec in dry condition showed the smallest values. 4. The Archcoat 502B coating is fitted to the dynamic instruments in the range of low speed and middle speed. Rigspray coating is fitted to the dynamic instruments in the range of high speed. 5. The wear mass of five kinds of coating materials at the range of low speed was very small, and those of the Archcoat S02B, Archcoat 402B and Rigspray coating at high speed range were quitely smaller than those of the Modified Epoxy and Tar Epoxy.
본 논문에서는 고유진동수를 구하기 Simple Iteration Method을 제시하였다. 이 방법은 임의의 단면과 지점을 갖고 임의의 하중을 받는 보나 탑의 진동모드와 관련된 고유진동수를 간편하면서도 정확하게 계산할 수 있는 획기적인 방법이다. 이 방법에는 공진상태에서 관성력에 기인한 부재의 처짐 모드를 구하게 된다. 진동해석을 위하여 처짐의 영향을 고려한 다양한 방법이 검토되었다. 이러한 목적으로 본 논문에서는 유한차분법을 사용하였다. 고유진동수에 대한 D22 휨강성의 영향을 철저하게 검토하였다. 본 논문에서는 구조 요소의 하중 분포 또는 상이한 단면에 따른 고유진동수에 대한 영향을 연구하였으며 그 결과를 제시하였다. 이 방법은 첨단복합재료를 포함한 2차원 문제에도 적용할 수 있다.