This study was performed in order to provide basic data for predicting the usefulness of Jicama (Pachyrhizus erosus) as a food raw material. The changes in the physicochemical properties of freeze-dried and hot air-dried Jicama were investigated and analyzed. The moisture content of raw Jicama was 81.84%. The crude protein, crude fat, crude ash and carbohydrate content of hot air-dried Jicama powder were 2.85, 0.79, 7.93 and 88.44%, while those of freeze-dried Jicama powder were 3.93, 0.83, 7.92 and 87.32%, respectively on dry basis. Regarding the color values, the lightness of freeze-dried Jicama (92.86) was higher than that of the hot air-dried Jicama (88.01), whereas the redness (-0.67) and yellowness (3.21) of freeze-dried Jicama were lower than those of the hot air-dried Jicama (0.43) and (11.96), respectively. The brown index was lower in the freeze-dried Jicama (0.029) than in hot air-dried Jicama (0.107). The total sugar content showed no significant differences between freeze (46.49 mg/g) and hot air-dried Jicama (45.11 mg/g). Finally, the amylose content was higher in freeze-dried Jicama (5.66%) than in hot air-dried Jicama (6.63%).

The purpose of this study was to perform a functional components analysis and investigate the physical properties of powders made from the stems or fruit of freeze-dried Cheonnyuncho cactus (Opuntia humifusa). The functional components analysis showed that the stem and fruit powders han vitamin C levels of 42.14 mg and 105.21 mg, respectively. The stems powder contained more lutein than the fruit powder. The fruit powder contained more vitamin C than the stem powder. The SDF (soluble dietary fiber) and IDF (insoluble dietary fiber) in the stem powder were 45.24% and 22.15%, respectively, which were higher then the values for the fruit powder. The stem and fruit powders contained 19.30 mg/g and 25.10 mg/g of crude saponin, respectively. The pH of the stem and fruit powders was 5.34 and 5.07, respectively, both indicating low acidity. The L, a and b values of the stem powder color were 78.28, –3.71, and 19.19, respectively. The L, a and b values of the fruit powder color were 55.56, 24.84, and –3.18, respectively. The stems powder had a higher bulk density, water holding capacity, and swelling power than those of the fruit powder, but water-retaining capacity of the stem powder was lower than that of the fruit powder. In addition, the stems powder had a higher viscous material content and water uptake compared to the fruit powder. Based on the above results, we determined that Cheonnyuncho (Opuntia humifusa) powder had potentially useful functional components and physical properties.

We stored sweet pumpkins at 8℃, 12℃, 12℃ plasma curing and room temperature (control) for 180 days. During this time, the quality characteristics were analyzed within the different groups. No spoiling occurred in either of the storage conditions for up to 120 days, and the marketability was good. After 120 days, spoiling sharply increased by over 70% in the control group, while in the 12℃ group it decreased to 20~60%. Conversely, spoiling was completely absent in the 8℃ and 12℃ plasma curing groups during the overall 180 days of storage. The lowest moisture content was found in the 8℃ group and the quality of the pumpkins was excellent during the entire storage period. The color of pulp was better in the 12℃ and 12℃ plasma curing groups, with best results were found in the latest. Both the 8℃ and 12℃ plasma curing groups maintained their dark green surface colors, while both the 12℃ and control groups turned from green to yellow. All groups showed a reduction in their initial hardness, with the 8℃ group staying the hardest. Soluble solid and mealiness was increased to the storage during 90 days while decreased, that were long to maintain the mealiness texture in the 8℃ storage pumpkin. The overall acceptability from sensory evaluation was higher in the 12℃ plasma curing group, when compared to those of the 8℃, 12℃ and control groups storage conditions.

This study was examined the ovogenesis of Ussurian bullhead, Leiocassis ussuriensis and the morphological development of its larvae and juveniles and to use the results as basic information for the preservation of species and resource enhancement. For artificial egg collection, human chorionic gonadotropin (HCG) was injected at a rate of 10 IU per gram of fish weight. During breeding period, water temperature maintained at 24.5~26.5℃ (mean 25.0±0.05℃). The process of ovogenesis reached the two-cell stage in 50 minutes after fertilization. In 73 hours of fertilization the movement of the embryoid body became active state and the larvae began to hatch from the tail through the oolemma. Length of prelarvae were 6.33~6.50 mm long (mean 6.40±0.06 mm) just after hatching having yolk with their mouth not opened. After thirty eight days of hatching, juveniles were 30.6∼32.5 mm long (mean 31.5±0.65 mm). The color was dark yellowish brown throughout the entire body, and the number of caudal fin rays developed to thirty six perfectly.

Background: We evaluated the effect of ulinastatin on paw withdrawal threshold (PWT), IL-6, and IL-10 in SD rats after spinal nerve ligation (SNL). Methods: Group C received N/S and Group E received ulinastatin IV for three days following SNL. PWT, IL-6, and IL-10 were measured on the 3rd, 5th, and 7th day. Results: Group E showed higher PWT compared to group C. IL-6 was lower in group E than in group C. No differences in IL-10 were observed between group C and group E. Conclusion: Ulinastatin increased the PWT and its effect appears to be involved with IL-6, not IL-10.

Purpose This study first explores – the possible dynamic relationship between ownership structure and firm performance using a panel of 4,900 Chinese-listed small- and medium-sized enterprises (SMEs) from 1999 to 2012. Research design, data, and methodology – We address this issue through a dynamic panel model using a method of moments (GMM) technique and dynamic simultaneous equations to alleviate the potential endogenous problem: unobserved heterogeneity, simultaneity, and dynamic endogeneity. Results – Under the framework of dynamic endogeneity, firm performance has a significantly positive influence on ownership, but not vice versa. Ownership and performance can be explained by their owned lagged values, respectively. Moreover, intertemporal endogeneity exists among ownership, investment, and performance through the application of system dynamic equations, which implies that the relationship among ownership structure, investment, and firm performance is dynamic by nature. Conclusions – This study also significantly contributes to a better understanding of dynamic corporate governance by providing further empirical evidence from the largest capital market in the Asian region.

Purpose To mislead shareholders – about a firm’s actual economic performance, managers frequently manage dividends. Earnings management also affects performance reviews. Managers attempt to manage reported earnings caused by current economic events to accurately reflect their current performance. Research design, data, and methodology – The sample consisted of 312 company-years from companies in the pharmaceutical distribution industry listed on the Tehran Stock Exchange. A study period from 2004 to 2014 was selected. In this study, a model for measuring the performance of the net profits to total assets of a division of Jones was used to measure earnings management. Results – This study found a negative correlation between corporate performance and earnings management. Conclusions – The results for the earnings management company indicated a significant inverse relationship. Therefore, the company’s performance weakened as its earnings management activity increased. In other words, the results showed that the company’s performance-based accruals earnings management, the actual management of profits, and the general level of earnings management had significant inverse relationships. Thus, as the company’s profits declined, earnings management activity increased.

Several optical monitoring strategies by a ground-based telescope to protect a Geostationary Earth Orbit (GEO) satellite from collisions with close approaching objects were investigated. Geostationary Transfer Orbit (GTO) objects, Inclined GeoSynchronous Orbit (IGSO) objects, and drifted GEO objects forced by natural perturbations are hazardous to operational GEO satellites regarding issues related to close approaches. The status of these objects was analyzed on the basis of their orbital characteristics in Two-Line Element (TLE) data from the Joint Space Operation Center (JSpOC). We confirmed the conjunction probability with all catalogued objects for the domestic operational GEO satellite, Communication, Ocean and Meteorological Satellite (COMS) using the Conjunction Analysis Tools by Analytical Graphics, Inc (AGI). The longitudinal drift rates of GeoSynchronous Orbit (GSO) objects were calculated, with an analytic method and they were confirmed using the Systems Tool Kit by AGI. The required monitoring area was determined from the expected drift duration and inclination of the simulated target. The optical monitoring strategy for the target area was analyzed through the orbit determination accuracy. For this purpose, the close approach of Russian satellite Raduga 1-7 to Korean COMS in 2011 was selected.

This study presents a precise relative navigation algorithm using both laser and Global Positioning System (GPS) measurements in real time. The measurement model of the navigation algorithm between two spacecraft is comprised of relative distances measured by laser instruments and single differences of GPS pseudo-range measurements in spherical coordinates. Based on the measurement model, the Extended Kalman Filter (EKF) is applied to smooth the pseudo-range measurements and to obtain the relative navigation solution. While the navigation algorithm using only laser measurements might become inaccurate because of the limited accuracy of spacecraft attitude estimation when the distance between spacecraft is rather large, the proposed approach is able to provide an accurate solution even in such cases by employing the smoothed GPS pseudo-range measurements. Numerical simulations demonstrate that the errors of the proposed algorithm are reduced by more than about 12% compared to those of an algorithm using only laser measurements, as the accuracy of angular measurements is greater than 0.001° at relative distances greater than 30 km.

By using the Optical Wide-field Patrol (OWL) network developed by the Korea Astronomy and Space Science Institute (KASI) we generated the right ascension and declination angle data from optical observation of Low Earth Orbit (LEO) satellites. We performed an analysis to verify the optimum number of observations needed per arc for successful estimation of orbit. The currently functioning OWL observatories are located in Daejeon (South Korea), Songino (Mongolia), and Oukaïmeden (Morocco). The Daejeon Observatory is functioning as a test bed. In this study, the observed targets were Gravity Probe B, COSMOS 1455, COSMOS 1726, COSMOS 2428, SEASAT 1, ATV-5, and CryoSat-2 (all in LEO). These satellites were observed from the test bed and the Songino Observatory of the OWL network during 21 nights in 2014 and 2015. After we estimated the orbit from systematically selected sets of observation points (20, 50, 100, and 150) for each pass, we compared the difference between the orbit estimates for each case, and the Two Line Element set (TLE) from the Joint Space Operation Center (JSpOC). Then, we determined the average of the difference and selected the optimal observation points by comparing the average values.

As a governmentally approved domestic entity for Space Situational Awareness, Korea Astronomy and Space Science Institute (KASI) is developing and operating an optical telescopes system, Optical Wide-field PatroL (OWL) Network. During the test phase of this system, it is necessary to determine the range of brightness of the observable satellites. We have defined standard magnitude for Low Earth Orbit (LEO) satellites to calibrate their luminosity in terms of standard parameters such as distance, phase angle, and angular rate. In this work, we report the optical brightness range of five LEO Satellites using OWL-Net.

New observations for the times of minimum lights of a well-known apsidal motion star CW Cephei were made using a 0.6 m wide field telescope at Jincheon station of Chungbuk National University Observatory, Korea during the 2015 observational season. We determined new times of minimum lights from these observations and analyzed O-C diagrams together with collected times of minima to study both the apsidal motion and the Light Time Effect (LTE) suggested in the system. The new periods of the apsidal motion and the LTE were calculated as 46.6 and 39.3 years, respectively, which were similar but improved accuracy than earlier ones investigated by Han et al. (2002), Erdem et al. (2004) and Wolf et al. (2006).

By adopting a 2D time-dependent wave code, we investigate how mode-converted waves at the Ion-Ion Hybrid (IIH) resonance and compressional waves propagate in 2D density structures with a wide range of field-aligned wavenumbers to background magnetic fields. The simulation results show that the mode-converted waves have continuous bands across the field line consistent with previous numerical studies. These waves also have harmonic structures in frequency domain and are localized in the field-aligned heavy ion density well. Our results thus emphasize the importance of a field-aligned heavy ion density structure for ultra-low frequency wave propagation, and suggest that IIH waves can be localized in different locations along the field line.

Steel slag has been used as the alternative binder to replace Portland cement that furthermore used as in construction and/or for stabilization/solidification of heavy metals in mine soil. One of the treatments to modify the leaching behavior of the mine soil is by carbonation. The purpose of this study was to assess the potential of carbonation in various steel slags. Based on chemical and mineralogical characterization of four kinds of slag that were used in this study, it showed that all slags had high potential for reacting with CO2 that was in accordance with the high CaO and MgO content. CO2 sequestration by aqueous carbonation of several kinds of stainless steel slags with different liquid to solid ratio was investigated in this study. The effect of chemical properties and reaction time on the performance of the carbonation process was also investigated. Converter slag, blast furnace slag (BFS) and ladle furnace slag (LFS) were used. Carbonation experiment was conducted in a closed reactor under the conditions; 1bar, 400rpm and 25℃, with solid to liquid ratios of 0.4, 0.6 and 1.0. Carbonation kinetic test was relatively fast and completed within 5 hours. The CO2 consumption increased when the liquid to solid ratio increased because of the dilution effect. Our results showed that the higher CaO and MgO contents in the slag, the higher CO2 consumption was observed. Pohang converter slag and Dangjin LFS showed slightly different tendency. At L/S ratio 0.4, Pohang slag with higher CaO and MgO content had higher CO2 consumption than Dangjin LFS. As the water content increased, Dangjin LFS had higher CO2 consumption than Pohang converter slag that was caused by the texture of Dangjin LFS with smaller particle size than Pohang converter slag. However, both Pohang BFS and Dangjin BFS have poor capacity in CO2 sequestration.

Impervious areas have been expanded by urbanization and the natural structure of water circulation has been destroyed. The limits of centralized management for controlling storm water runoff in urban areas have been suggested. Low impact development (LID) technologies have been promoted as a crucial alternative, establishing a connection with city development plans to build green infrastructures in environmentally friendly cities. Thus, the improvement of water circulation and the control of nonpoint source were simulated through XP-SWMM (storm water and wastewater management model for experts) in this study. The application of multiple LID combination practices with permeable pavements, bioretention cells, and gutter filters were observed as reducing the highest runoff volume by up to 70%. The results from four different LID installation scenarios indicated that permeable paving is the most effective method for reducing storm water runoff. The rate of storm water runoff volume reduced as the rainfall duration extended. Based on the simulation results, each LID facility was designed and constructed in the target area. The LID practices in an urban area enable future studies of the analysis of the criteria, suitable capacity, and cost-efficiency, and proper management methods of various LID techniques.

In offshore, various external forces such as wind force, tidal current and impulsive breaking wave force act on offshore wind tower. Among these forces, impulsive breaking wave force is especially more powerful than other forces. Therefore, various studies on impulsive breaking wave forces have been carried out, but the soil reaction are incomplete. In this study, the p-y curve is used to calculate the soil reaction acting on the offshore wind tower when an impulsive breaking wave force occurs by typhoon. The calculation of offshore wind tower against impulsive breaking wave force is applied for the multi-layered soil. The results obtained in this study show that although the same wave height is applied, the soil reaction generated by impulsive breaking wave force is greater than the soil reaction generated by wave force.

A cartridge type sensor head was fabricated to detect the level of corrosion in steel cables with consistent or varying cross sections by assessing the LMA (Loss of Metallic Area) damage. Two coil sensor cartridges were made to cater to cables with up to 70mm and 150mm. The developed system was verified through lab experiment using a tapered steel cable specimen, and through a field test conducted in cable bridge. The result showed that the developed system is capable of assessing a cable with varying cross section.