In this work, Ag3PO4/In2S3 nanocomposites with low loading of In2S3 (5-15 wt %) are fabricated by two step chemical precipitation approach. The microstructure, composition and improved photoelectrochemical properties of the asprepared composites are studied by X-ray diffraction pattern (XRD), field emission scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), photocurrent density, EIS and amperometric i-t curve analysis. It is found that most of In2S3 nanoparticles are deposited on the surfaces of Ag3PO4. The as-prepared Ag3PO4/ In2S3 composite (10 wt%) is selected and investigated by SEM and TEM, which exhibits special morphology consisting of lager size substrate (Ag3PO4), particles and some nanosheets (In2S3). The introduction of In2S3 is effective at improving the charge separation and transfer efficiency of Ag3PO4/In2S3, resulting in an enhancement of photoelectric behavior. The origin of the enhanced photoelectrochemical activity of the In2S3-modified Ag3PO4 may be due to the improved charge separation, photocurrent stability and oriented electrons transport pathways in environment and energy applications.

The photovoltaic properties of perovskite solar cells (PSCs) with a carbon electrode fabricated using different annealing processes are investigated. Perovskite formation (50 oC, 60 min) using a hot-plate and an oven is carried out on cells with a glass/fluorine doped TiO2/TiO2/ZrO2/carbon structure, and the photovoltaic properties of the PSCs are analyzed using a solar simulator. The microstructures of the PSCs are characterized using an optical microscope, a field emission scanning electron microscope, and an electron probe micro-analyzer (EPMA). Photovoltaic analysis shows that the energy conversion efficiency of the samples fabricated using the hot-plate and the oven processes are 2.08% and 6.90%, respectively. Based on the microstructure of the samples and the results of the EPMA, perovskite is formed locally on the carbon electrode surface as the γ-butyrolactone (GBL) solvent evaporates and moves to the top of the carbon electrode due to heat from the bottom of the sample during the hot plate process. When the oven process is used, perovskite forms evenly inside the carbon electrode, as the GBL solvent evaporates extremely slowly because heat is supplied from all directions. The importance of the even formation of perovskite inside the carbon electrode is emphasized, and the feasibility of oven annealing is confirmed for PSCs with carbon electrodes.

Reducing CO2 into high value fuels and chemicals is considered a great challenge in the 21st century. Efficiently activating CO2 will lead to an important way to utilize it as a resource. This article reviews the latest progress of g-C3N4 based catalysts for CO2 reduction. The different synthetic methods of g-C3N4 are briefly discussed. Article mainly introduces methods of g-C3N4 shape control, element doping, and use of oxide compounds to modify g-C3N4. Modified g-C3N4 has more reactive sites, which can significantly reduce the probability of photogenerated electron hole recombination and improve the performance of photocatalytic CO2 reduction. Considering the literature, the hydrothermal method is widely used because of its simple equipment and process and easy control of reaction conditions. It is foreseeable that hydrothermal technology will continue to innovate and usher in a new period of development. Finally, the prospect of a future reduction of CO2 by g-C3N4-based catalysts is predicted.

The Korea Atomic Energy Research Institute (KAERI) has developed geological repository systems for the disposal of high-level wastes and spent nuclear fuels (SNFs) in South Korea. The purpose of the most recently developed system, the improved KAERI Reference Disposal System Plus (KRS+), is to dispose of all SNFs in Korea with improved disposal area efficiency. In this paper, a system-level safety assessment model for the KRS+ is presented with long-term assessment results. A system-level model is used to evaluate the overall performance of the disposal system rather than simulating a single component. Because a repository site in Korea has yet to be selected, a conceptual model is used to describe the proposed disposal system. Some uncertain parameters are incorporated into the model for the future site selection process. These parameters include options for a fractured pathway in a geosphere, parameters for radionuclide migration, and repository design dimensions. Two types of SNF, PULS7 from a pressurized water reactor and Canada Deuterium Uranium from a heavy water reactor, were selected as a reference inventory considering the future cumulative stock of SNFs in Korea. The highest peak radiological dose to a representative public was estimated to be 8.19×10-4 mSv‧yr-1, primarily from 129I. The proposed KRS+ design is expected to have a high safety margin that is on the order of two times lower than the dose limit criterion of 0.1 mSv‧yr-1.

Recently, a lots of studies have been conducted to imitate real meat with the factors including texture, aroma, taste, and color of meat analogues. Since the color component of meat is diverse and complex, as well as large of degree of change according to cooking, the color imitating has been still challenging. In this study, we selected up a representative meat analogue (tteok-galbi), tracked the color change at three making points as steps of batter, steaming, and cooking. In order to realize the color at these points, three plant-based natural pigments including prickly pear cactus, sweet pumpkin, and mugwort were selected, and the color with optimized ratio was applied to the tteok-galbi. As a result, it was found that 1:3:1 in the batter, 2:1:2 in steaming, and 2:1:2 in cooking were optimal ratios. The results in this study were significant in that it could apply the colors to meat analogues according to the combination of natural pigments derived from plants.

The purpose of this study was to develop synbiotic materials and to apply them to the puffed grain products using electrostatic spraying technology. Lactic acid bacteria were isolated from Kimchi and selected through tests of acid resistance, bile salt resistance and γ-aminobutyric acid (GABA) content. The isolated Lactobacillus brevis CFM21 produced highest GABA production up to a concentration of 926.42 μg/mL when grown in MRS broth containing 0.8% MSG. The possibility of coated grains as a prebiotic material was evaluated Confocal laser scanning micro scopy (CLSM). Rice bran extract containing 2% dextrose, 2% soytone, 0.2% potassium chloride, 0.6% MSG was produced 524.77 μg/mL of GABA. Citrus sinensis oil showed the highest antibacterial activity against Clostridium perfringens Electrostatic spray showed much higher effectiveness than conventional spray in coating the puffed grain product through CLSM. Applying Rice bran culture and Citrus sinensis oil to puffed grain product using electrostatic spray could contribute to promote intestinal health of consumers.

Background: Anterior cruciate ligament reconstruction (ACLR) causes a reduction in the balance of the lower extremities. Static and dynamic balance were evaluated separately to confirm the decrease in balance in patients underwent ACLR. The commonly used methods include the Biodex Balance System (BBS) for static balance and the Y balance test (YBT) for dynamic balance. No study has evaluated whether the static and dynamic balance of the involved side recovers as much as the uninvolved side one year after ACLR. Objects: The purpose of this study was to investigate the recovery of static and dynamic balance between the involved and the uninvolved sides. Methods: The BBS (overall, anteroposterior index, and mediolateral index) and YBT (anterior, posterolateral, and posteromedial) of 58 patients underwent ACLR were measured one year postoperation. Both sides of the BBS and the YBT were compared using the paired t-test. Results: All the index of the BBS showed no difference between the involved and the uninvolved sides, while all the scores of the YBT showed a significant difference in both sides. The YBT anterior result was 54.64 ± 5.62 cm in the involved side and 56.90 ± 5.41 cm in the uninvolved side (p = 0.001). The YBT posterolateral results were 90.12 ± 10.51 cm and 92.34 ± 9.85 cm (p = 0.013). The YBT posteromedial results were 93.72 ± 8.84 cm and 96.14 ± 9.37 cm (p = 0.002). Conclusion: A year after ACLR, the static balance showed no difference, while the dynamic balance showed a significant difference in the involved and the uninvolved sides. The static balance of the involved side recovered as much as the uninvolved side, but the dynamic balance did not. Therefore, dynamic balance training should be considered in the rehabilitation program for patients underwent ACLR.

Background: Forward head posture (FHP) is common postural malalignment. FHP is described relatively extension to upper cervical and lower cervical is relatively flexion. Although several researchers mentioned the lower cervical flexion posture in FHP, most of the studies related to FHP is focused on the deep cervical flexor function. Objects: The purposes of present study is to compare the cervical strength (upper cervical extension [UCE], lower cervical extension [LCE], upper cervical flexion [UCF], lower cervical flexion [LCF]) between individuals with and without FHP. Methods: Fifty-one participants are recruited. Participants who have the craniovertebral angle (CVA) less than 48 degree were classified to the FHP group (n = 24) and the others were included in without FHP group (n = 27). The cervical strength (UCE, LCE, UCF, LCF) were measured using Smart KEMA strength sensor and the strength data was normalized by body weight. All strength measurement conducted at head and neck neutral position in sitting. Independent t-test was used to compare the cervical strength between individuals with and without FHP. Results: The mean value of CVA was greater in without FHP group than with FHP group (p < 0.000). The strength value of UCF (p < 0.002) and LCE (p < 0.001) was significant less in FHP group than without FHP group. But no significant differences were seen in the LCF and UCE strength between two groups. Conclusion: UCF and LCE weakness in FHP group should be considered to evaluate and manage the individuals with FHP.