Background : The authors of this study analyzed the effect of the green manures cultivated in the soil of the preparation field in order to select the green manures suitable for ginseng cultivation and the effect of the green manures on the variation of ginseng growth development, the content of crude saponin and yield ability with the aim to use the results as the primary data for improving the quality of ginseng. Methods and Results: To analyze the effect of the application of green manures on the growth of ginseng, the authors cultivated 4 varieties of green manures and installed blue polyethylene sheet and one-layered black polyethylene net+three-layered blue polyethylene net(OBPNTB) and sun-shading material on the managed soil by re-applying green manures and then cultivated ginseng. The results suggested that the growth of ginseng was excellent in the barley+hairy, barely and rye cultivation plot in the plot treated with OBPNTB rather than the cultivation plot teated with Blue polyethylene sheet(BPS) and two-layered blue & two-layered black polyethylene net(TBTBPN), and the growth of leaf length and stalk diameter was excellent in barely + hairy vetch material. For the underground root weight, the growth was the most excellent(30.19g) in the barley+ hairy vetch cultivation plot treated with OBPNTB. For the underground red discoloration and root rot, the incidence rate was the lowest in the plot treated with BPS in which the water leak in a levee was small than in the test plot treated with sun-shading net. For the ginsenoside content in the cultivation plot treated with TBTBPN, the ginsenoid content was the highest in the rey cultivation plot, and it was the highest in the cultivation plot treated with OBPNTB. Conclusion : The results of study suggested rye among green manures is the most suitable for the growth of ginseng; underground growth was the most prominent in the plot treated with sun-shading net material (black 1 + blue 3) and the underground ginsenoside content was the most prominent in the rye cultivation plot and the plot treated with the sun-shading sheet.

Background : In recent years, as the ginseng cultivation area using vinyl house is increasing, the demand of farmhouses for the studies of appropriate direct seeding cultivation and ginseng varieties for vinyl house cultivation is increasing, and there is a necessity to produce high quality clean ginseng in vinyl house in tandem with the consumers’ demand for pesticide-free ginseng and the supply-demand of ginseng seedling for sprout ginseng. Thus, the authors of this study analyzed the change of photosynthetic properties according to the cropping pattern and varieties with the aim to use the results of this study as the primary date for improving the quality of ginseng cultivated in vinyl house. Methods and Results : The authors analyzed the change of photosynthetic properties for the 3-year old ginseng cultivated through direct seeding according to the ginseng field levee height (10, 20, 30cm) and width (90, 100, 110, 120cm). The results suggested that with an increase in light intensity, the photosynthesis tends to increase regardless of levee height and width. When the levee width was 90cm, the photosynthesis increased as the levee height was reduced and it increased as the levee height increased when the levee width was 100cm. The photosynthesis was high when the levee height was 20cm for the levee width of 110cm and 120cm. The photosynthesis was analyzed for 11 varieties of 3-year old ginseng cultivated through direct seeding. The results suggested that the photosynthesis tends to increase as the light intensity increased in all 11 varieties, and the photosynthesis was the highest at 500PAR(ray source: 3.23umolCO2m-2s-1㎛ol) in the order of Cheonpoong, Yeonpoong, Cheongson and Sonwoon. Conclusion : The results of this study suggested that the photosynthesis according to the direct seeding cultivation in vinyl house increased as the levee height decreased for the levee width of 90cm and it was high when the levee height was 20cm for the levee width of 120cm. For the ginseng variety, Sonwon and Cheonpoong showed the highest photosynthesis.

Background : This study was conducted to determine the impact of temperature elevated and the effect of transplanting times based on climate change scenario on growth of 2-year-old korean ginseng (Panax ginseng C. A. Meyer.) in temperature gradient chambers (TGC). Methods and Results : As a plant materials, ‘Yunpoong’ was cultivated in TGC at ambient temperature(Amb), Amb+2℃, Amb+4℃ and Amb+6℃ respectively. Ginseng was also transplanted on March 29, April 12 and 26 respectively. Investigation on characteristic of aerial parts were carried out on 28, 56, 84 and 112 days after transplanting and characteristic of roots were conducted on October 19. As transplanting time was faster and temperature was higher, the growth of aerial parts were increased. Compared with those of ginseng transplanted on March 29 with Amb, the root weight which tend to decrease depending on late transplanting time and high temperature decreased about 11.1%, 35.4% and 42.4% in Amb+ 2℃, Amb+4℃ and Amb+6℃ respectively. Ginseng transplanted on April 12 and 26 decreased about 20.9%, 33.9% respectively. Conclusion : Consequently, the more transplanting time extend, the more quantity increased in all temperature treatment. So, it is possible to increase in quantity to advance transplanting time although high temperature will be caused by the climate change.

Background : Liriope platyphylla Wang et. Tang is a perennial plant and its tuberous root is used as herbal medicine. Liriope platyphylla is grown throughout a year from April to April of next year. Recently, the production was lowered because of severe drought/rainfall and injury by successive cropping. The ridge height affected the growth of shoots and roots as affected by drought or rainfall. It is necessary to establish the cultivation techniques for stable quantity per unit area and good tuber’s quality. This experiment was carried out to select a cultivar of good tuber quality and to determine the ridge height for high-yielding. Methods and Results : It were investigated the characteristics of roots and tubers depending on different ridge heights in four varieties of Liriope platyphylla Wang et. Tang. There was not significantly different in shoot growth by different ridge heights. The tubers distribution in less than 10cm soil depth at the surface was decreased about 6.6% in the 15cm ridge height compared to 5cm. So, the mean distributed position of tubers was deepened at higher ridge. The cultivars that tubers were mainly distributed in the 10cm depth from surface was Seoungsu and Cheongyang natives’s lines. The no. of tubers per a plant and the ratio of marketable tubers were increased about 13.2% and 20.1% in the 15cm ridge height compared to 5cm. Considering the tuber sizes and ratio of marketable tubers, Cheongshim and Maekmundong 1 has good quality than Seoungsu or Cheongyang natives’s lines. The tuber yield increased about 19.5% in the 15cm ridge height compared to the 5cm. So, high ridge was advantaged to increase the yield. Conclusion : From the above results, the quality and quantity of tubers of Liriope platyphylla Wang et. Tang was good in the higher ridge. We recommended Cheongshim cultivar because of the large tuber sizes and high ratio of marketable tubers.

Background : Liriope platyphylla Wang et. Tang is a species of Liliaceae and its tuber is used as medicinal herbs. This medicinal plant is mainly cultivated in Cheongyang and Buyeo of Chungcheongnam-Do and Miryang of Gyeongsangnam-Do. It is necessary to establish a cultivation techniques for stable production to solve the problems that are found on farms. These farm surveys were carried out to obtain the basic data on soil environment and cultivation conditions at main producing areas of Chungnam-Do in Liriope platyphylla Wang et. Tang. Methods and Results : The surveys were investigated from 37 farmers in Cheongyang and 32 farmers in Buyeo who cultivate Liriope platyphylla Wang et. Tang. There were slightly differences in the local characteristics between Cheongyang and Buyeo. The rate of successive cropping for more than 3 years were 19% at Cheongyang and 41% in Buyeo. The reason may be due to the a small-owned field. It has grown 28% at Cheongyang and 59% at Buyeo in paddy fields. The injury by successive cropping that farmers argued were the increasing pest/disease occurrence, degradation of tuber quality and yield reduction. Crops planted after the harvest of L. platyphylla were mostly Pepper or soybean in upland. It is necessary to reduce the injury of successive cropping. The results of 112 soil analysis data were classified by 8 soil series. There are many acidic soil, lack of organic matter, excess phosphate. However, it did not analyzed the influences on the growth and yield of the crop as affected by different soil conditions. Conclusion : From the above results, it is necessary to develop cultivation techniques on the reduction of injury of successive cropping, such as cropping system, seedling transplanting cultivation, cultivation methods for good agricultural practices(GAP) and soil improvement.

Background : Usually, planting and harvest time is around the middle of April. A labor shortage deu to her planting time as harvest time and some farmers were late planting culture. After planting until take rooting It will take more than one month when late planting growth is bad. Seedling cultivation, just taking rooting is agricultural growth promotion. Methods and Results : So did design the optimum nursery days and number of plants. Nursery days were 30 days and 45 days and number of plants 1, 3, 5 plants. Plant length was longer in less number of plants while Root length was longer in more number of plants of Temporary planting seedling, Leaf number was a big increase but number of plants was not a big shift. In post-havest survey, plant length was longer in 3 number of stem and root length was longer in one number of stem. 45 days and 3 number of stem seedling was the most good in number, weight and length of tuberous root. Yield of 45 days and 3 number of stem seedling was higher 7% than 1 number of stem seedling and higher 5% than 5 number of stem seedling. 45 days and 3 number of stem seedling was 1,789 thousand per 10a in income was the most. Conclusion : Result of this study, for rasing healthy seeding nursery days 45 days and number of plants 3 plant

Background : Acreage of rain-shelter plastic greenhouse to prevent anthrax is being gradually increased according to growing importance of safe Boxthorn production. But When Boxthorn is grown in the hot season in rain-shelter plastic greenhouse, quantity of Boxthorn decreases. therefore the research was carried out to investigate Fertilization mode. Methods and Results : Chungwoon was very strong self-incompatibility. Chengyangjaerae, Chengyang18 and CBP11542-206 was self-compatibility. Artificial fertilization rate was slightly higher in roof and side vents than in side vents of rain-shelter plastic greenhouse in hot season. Pollen sterility due to high temperature is not critical because artificial fertilization rate was high in side vents of rain-shelter plastic greenhouse in hot season. Airborne fertilization rate was significantly lower in all varieties. Open fertilization rate was higher in roof and side vents than in side vents of rain-shelter plastic greenhouse Conclusion : Roof and side vents was good in compared to side vents in rain-shelter plastic greenhouse of Boxthorn because of high Airborne and open fertilization rate. Self-compatibility varieties were better than self-incompatibility varieties in rain- shelter plastic greenhouse because of high open fertilization rate.

Background : When ginseng seeds were gathered, the seeds were unripe. To grow immature embryo definitely, special treatment called dehiscence must be performed. Even though dehiscence is completed, most ginseng seeds are on enforced dormancy. The breaking seed dormancy is generally achieved using cold treatment. Also it is reported that gibberellin treatment can replace the treatment. It is very time consuming process in order to develop new ginseng cultivar because ginseng flowers after 3 years of growth. To shorten the ginseng breeding period, it is necessary to establish fast generation progress. Therefore, this study examined the possibility of breaking seed dormancy of ginseng using GA3 treatment and alternating temperature. Methods and Results : Seeds were obtained from local variety fruit which is not inbred. Gibberellin of 100 ppm was treated at seeds for 24 hours. Fixed cold condition was treated on both –2℃ and 2℃. Alternating cold condition was treated on 2℃ and then –2℃, finally 2℃. Fixed and alternating temperature was continued for 15, 30, 45, 60, 90 days that 15 days of alternating temperature is first 2℃ for 5days and then -2℃ for 5days, finally 2℃ for 5days. The other treatment periods such as 30, 45, 60, 90 days mean 10, 15, 20, 30 days respectively. Each of 48 seeds were sowed on tray in greenhouse at 3 replication. Experimental plot was completely randomized. Conclusion : Seeds untreated with GA3 were germinated little and there is no difference between 2℃ and –2℃. Alternating temperature until 60days made no difference with fixed temperature but germination rate increased up to 70.8% when seeds were treated for 90days. Germination of seeds treated with GA3 is much higher than untreated seeds especially combined with alternating temperature.

Background : Fruit picking is the most labor consuming procedure for Boxthorn (Lycium chinense Mill.) growers. Recently fruit harvesters were invented and improved in the efficiency to fulfill the expectation of farmers through field demonstration tests. Additionally, T-type hedge cultivation method harmonized well with fruit picking machine, but it also needed to be improved in its’ pruning methods for the efficiency of fruit collecting procedure. Methods and Results : In this experiment, ‘Cheong-un’ cultivar and local variety were grown in the rain shelter greenhouses for the tests. Plots were set by randomized block design. There were two types of previously developed harvesters. One vibrates it’s harvest rod right and left (A type) and the other shakes it’s rod back and forth (B type). Among two harvesters A type was superior to B type in efficiency and convenience in use and it was able to harvest eleven times more fruits than manual picking in simple comparison test. In field comparison test, A type harvester performed 4.6 to 5 times more fruits than manual fruit picking. T-type hedge cultivation method is the proper way of enhancing efficiency of harvester. In the test, wiry perpendicular branches formed by once pruning method hindered moving forward of fruit collector. However installing collecting net with velcro along the edge under the field increased the efficiency and handiness of fruit harvester and well harmonized with T-type hedge cultivation. Conclusion : From the above results, the newly developed fruit harvester could increase the annual income of Boxthorn growers by reducing fruit picking labor and time.

Background : Boxthorn has been cultivated by conventional fertilization and irrigation methods that can be characterized by applying a great deal of fertilizers and a small amount of water compared to the other crops. With increasing rain shelter greenhouses, there were significant needs for developing new fertigation and irrigation methods. In this study, several prescribed fertigation methods for balanced fertilizer application and a few irrigation start methods based on soil moisture tension has been tested to confirm the fruit quality and productivity for Boxthorn growers. Methods and Results : In the experiment, ‘Cheong-un’ cultivar was grown in the rain shelter greenhouses for the tests. Plots were set by randomized block design. According to the growth investigation on the ‘Cheong-un’ cultivar which is supplied with four different formulated fertigation, the formulation N 15 me/ℓ increased the size and weight of fruit leading to 17% increased yield than the others. Additionally, on the amount of annual supply of fertigation with the concentration of N 15 me/ℓ, the treatment applied with 10kg/10a during the cultivation period facilitated overall growth of ‘Cheong-un’ cultivar and increased the yield as well. In the irrigation experiment ‘Cheong-un’ cultivar was grown in the four differently planned treatments that start irrigation at –20, -40, -50 and -100kPa soil moisture tensions. According to the investigation, the irrigation treatment starting at -50kPa enhanced the number of fruit bearing and productivity of Boxthorn consistently during two years. Conclusion : Therefore, the newly developed fertigation and irrigation methods could enhance the annual income of Boxthorn growers by increasing growth and yield.

Background : The effect of ridge-up bed cultivation and stem training method on the plant growth and yield of Cynanachum willfordii was investigated. Methods and Results : Domestic variety of Cynanachum willfordii was tested at Chungbuk ARES under the following conditions. Nonsupporting (custom) and I-form supporting was used for stem training method, and ridge height was set as 30 (custom) and 60 cm (high ridge). Planting spacing was adjusted to 30 (interrow spacing) × 20 cm (intrarow spacing), and other major management was followed the method of standard cultivation for medicinal crop. Investigated result from leaf characteristics, leaf length was longer in high ridge cultivation (HRC) as 11.1 cm than custom cultivation (CC) as 10.6 cm. Leaf width is proved to be 12.8 (HRC) > 11.2 cm (CC). Leaf number is proved to be 294 (HRC) > 254/plant (CC), with higher number of 44/plant at HRC and weight/10 leaves were more heavy at HRC (4.9 g) than that of CC (2.6 g). It was more fruit setting at HRC over 15/plant. According to the stem training method and ridge height from nonsupporting cultivation, main root was 4.0 (CC), higher than that of HRC over 0.5/plant. However, root length was more longer in HRC (28.6) than that of CC (25.0 cm). Main root diameter was also showed more thicker pattern in HRC. From staking cultivation, root number of HRC was 7/plant, it was recorded more 3/plant than that of CC, and it was also same pattern in main root length and root diameter. By the standard of commercial root, yield of living roots in nonsupporting cultivation were 59.0g/plant (HRC), it was more heavy over 10.4g/plant than that of CC. In staking cultivation, HRC were recorded as 74.2g/plant, more heavy 6.9g/plant than that of CC. Yield from I-form support stem training and ridge-up bed cultivation of HRC was higher approxmiately 52.7% than that of CC. Conclusion : Overall growth by high ridge cultivation of I-form support was good and yield of HRC was also increased over 52.7% than that of CC.

Background : Chinese matrimony vine (Lycium chinense Mill.) is a deciduous shrub belonging to the Solanaceae. The leaves are used as an alternative raw material replacing dried fruits associated with high production costs in many industires. The aim of this experiment was to determine the effect of drying temperature on the leaves used in the manufacture of functional products. Methods and Results : The leaves of Chinese matrimony vine were harvested when the plant height reached 60 - 70 ㎝ in the spring and treated at four different temperatures (40℃, 50℃, 60℃ and 70℃). The time to reach the desiccation state of 20% was 63 h at 40℃, 37 h at 50℃, 17 h at 60℃ and 11 h at 70℃. The drying rate per hour was 1.28% at 40℃, 2.25% at 50℃, 4.94% at 60℃ and 7.60% at 70℃. No significant difference were observed in ash, crude fat, polyphenol or rutin content of treated samples. Crude protein and betaine content decreased with higher dry temperatures. Nitrogen free extract of the treated samples increased with higher drying temperatures. Conclusions : Taking into consideration drying time, drying rate, color value, energy consumption and functional ingredients is advantageous to dry the leaves of the Chinese matrimony vine at 60℃ using a hot air agricultural dryer.

Background : This study was carried out to investigate the changes to fatty acid, mineral, and ginsenosides contents in ginseng seed when they were stratified for different length of time and to determine whether variety had any effects on the changes. The aim was to improve the ginseng seed stratification process. Methods and Results : The ginseng varieties used were Geumpoong, Chunpoong, Yunpoong, and K-1. Stratifying periods treated on ginseng seed were 0, 20, 40, 60, 80, and 100 days. The main fatty acids of ginseng seed were oleic acid (C18 : 1, n9c) with a content of 78.40 - 79.20% followed by linoleic acid (C18 : 2, n6c). The main mineral in the seeds was potassium (K), at 1208.2 - 1337.6 ㎎/100 g. The main ginsenosides in ginseng seed were ginsenoside Re and Rb1. Increasing the length of the stratification periods led to increases in oleic acid content (60 - 80 days), however after this the content declined. In contrast, linoleic acid content fell as the stratification period increased. K, P, Mg, Ca and Na content rose as the stratification period increased. The ginsenoside Re content of Chunpoong and K-1 cultivar seeds also rose as the stratification period increased which meant that total ginsenoside content increased. However, ginsenoside Re content rose in Geumpoong and Yunpoong seeds, but total ginsenoside content decreased as the stratification period increased. Conclusions : Some beneficial compound in ginseng seed rose as the stratification period increased. Therefore, ginseng seed stratification could improve the food value of ginseng.

Hepatocytes and hepatic progenitors derived from human ES cells may be a useful source for clinical application. Therefore, identification and purification of these cell types would be following important issues. There are very few candidate surface markers that can be used to identify and purify hepatic progenitor cells. In addition, indocyanine-green can be uptaken by mature hepatocytes, but cannot be applied for fluorescence activated cell sorting (FACS) due to its long emission wavelength. In the present study, we tested EpCAM as a potential marker for magnetic-activated cell sorting (MACS) of hepatic progenitors and also modified indocyanine-green into fluorescent indomonocarbocyanine for FACS-mediated sorting of mature hepatocytes after differentiation of human ES cells. Hepatic progenitor cells were sorted by MACS after incubation with anti-human EpCAM antibodies. After the final differentiation, the differentiated cells and mouse primary hepatocytes (control group) were incubated with indomonocarbocyanine and were sorted by FACS. MACS and immunocytochemistry data showed that approximately 45% of differentiated cells were EpCAM-positive cells. EpCAM-positive cells expressed α-fetoprotein, FOXa2, HnF4a, and CK18. Differentiation efficiency into albumin-positive cells was significantly higher in EpCAM-positive cells, compared to EpCAM-negative cells. Importantly, indomonocarbocyanine successfully stained cells that expressed ALB. Furthermore, FACS analysis data showed that the purity of hepatocytes that expressed albumin was significantly increased after purification of indomonocarbocyanine-positive cells. Our data demonstrated that human ES cell-derived hepatic progenitors can be efficiently isolated by MACS using EpCAM antibody. In addition, we also showed that indomonocarbocyanine can be successfully used to identify and purify mature hepatocytes using FACS.

Highly homogeneous and functional stem cell-derived hepatocyte-like cells (HLCs) are considered a promising option in the treatment of liver disease and the development of effective in vitro toxicity screening tool. However, the purity of cells and expression and/or activity of drug metabolizing enzymes in stem cell-derived HLCs are usually too low to be useful for clinical or in vitro applications. Here, we describe a highly optimized differentiation protocol, which produces more than 90% albumin-positive HLCs with no purification process. In addition, we show that hepatic enzyme gene expressions and activities were significantly improved by generating three-dimensional (3D) spheroidal aggregate of HLCs. The 3D differentiation method increased expressions of nuclear receptors that regulate the proper expression of key hepatic enzymes. Furthermore, a significantly increased hepatic functions such as albumin and urea secretion were observed in 3D hepatic spheroids and HLCs in the spheroid exhibited morphological and ultrastructural features of normal hepatocytes. Importantly, we show that repeated exposures to xenobiotics facilitated the functional maturation of HLC, as confirmed by increased expression of genes for drug metabolizing enzymes and transcription factors. In conclusion, the 3D culture system with repeated exposures to xenobiotics may be a new strategy for enhancing hepatic maturation of stem cell-derived HLCs as a cell source for in vitro high-throughput hepatotoxicity models.

Hepatocyte-like cells (HLCs) derived from human pluripotent stem cells have received extensive attention in the development of drug screening and toxicity testing. However, it has been reported that stem cell-derived HLCs showed hepatic functions that were too limited to be of use in drug screening and toxicity testing, possibly due to the lack of sufficient intercellular communication under conventional two-dimensional (2D) culture conditions. Therefore, a 3D differentiation system may overcome the in vitro limitation of 2D culture to produce stem cell-derived hepatocytes with mature metabolic functions. In this study, the feasibility of using a silicone-based spherofilm, specifically designed to produce spherical cell clusters, to generate uniformly sized 3D hepatic spheroids from hESCs was investigated. Hepatic spheroids generated on the spherofilm showed more homogenous size and shape than those generated in conventional low-attachment suspension culture dishes. Results of immunohistochemical analysis showed that expression of the mature hepatic marker albumin (ALB) increased over time during the hepatic maturation process. Furthermore, the 3D culture system mimicked the in vivo 3D microenvironment. Laminin, which is an important component of hepatic ECM, was expressed in hepatic spheroids. The results of immunohistochemical analysis indicated that the 3D culture environment is capable of generating an in vivo-like microenvironment. In addition, quantitative PCR analysis showed that the mature hepatic marker ALB and cytochrome P450 (CYP) enzymes CYP3A4 and CYP3A7 were expressed at higher levels in 3D culture than in 2D culture. This indicates that the 3D culture system is suitable for hepatic maturation and that our size-controlled 3D culture conditions might accelerate hepatic function. These results suggest that 3D hepatic spheroids significantly enhance metabolic maturation of hepatocytes derived from hESCs

We estimated the orbit of the Communication, Ocean and Meteorological Satellite (COMS), a Geostationary Earth Orbit (GEO) satellite, through data from actual optical observations using telescopes at the Sobaeksan Optical Astronomy Observatory (SOAO) of the Korea Astronomy and Space Science Institute (KASI), Optical Wide field Patrol (OWL) at KASI, and the Chungbuk National University Observatory (CNUO) from August 1, 2014, to January 13, 2015. The astrometric data of the satellite were extracted from the World Coordinate System (WCS) in the obtained images, and geometrically distorted errors were corrected. To handle the optically observed data, corrections were made for the observation time, light-travel time delay, shutter speed delay, and aberration. For final product, the sequential filter within the Orbit Determination Tool Kit (ODTK) was used for orbit estimation based on the results of optical observation. In addition, a comparative analysis was conducted between the precise orbit from the ephemeris of the COMS maintained by the satellite operator and the results of orbit estimation using optical observation. The orbits estimated in simulation agree with those estimated with actual optical observation data. The error in the results using optical observation data decreased with increasing number of observatories. Our results are useful for optimizing observation data for orbit estimation.

To understand molecular mechanisms underlying adaptation of plant cells to saline stress and stress memory, we developed Arabidopsis callus suspension-cultured cells adapted to high salt. Adapted cells to high salt exhibited enhanced tolerance compared to control cells. Moreover, the salt tolerance of adapted cells was stably maintained even after the stress is relieved, indicating that the salt tolerance of adapted cells was memorized. Salt-adapted and stress memorized cells were densely aggregated and formed multi-layered cell lump. Cell morphology analysis using transmission electron microscopy indicated that cell wall thickness of salt-adapted cells was significantly induced compared to control cells. In order to characterize metabolic responses of plant cells during adaptation to high salt stress as well as stress memory, we compared metabolic profiles of salt-adapted and stress-memorized cells with control cells by using NMR spectroscopy. A principle component analysis showed clear metabolic discrimination among control, salt-adapted and stress-memorized cells. Compared with control cells, metabolites related to shikimate metabolism such as tyrosine, and flavonol glycosides, which are related to protective mechanism of plant against stresses were largely up-regulated in adapted cell lines. Moreover, coniferin, a precursor of lignin, was more abundant in salt-adapted cells than control cells. The results provide new insight into metabolic level mechanisms of plant adaptation to saline stress as well as stress memory.

This study was performed to investigate the growth characteristics and inorganic components of Codonopsis lanceolata regarding regional differences. The plant height of Japanese Codonopsis lanceolata was 373.6 cm, so it’s revealed that it has more vigorous growth than Korean won. The flowering time of Korean Codonopsis lanceolata was 2 weeks faster than Japanese one. Total fresh weight of root was 41.0 g and 39.0 g for Korean and Japanese respectively, thus, no significance difference was found. However, regarding fresh weight, Korean one had a more fresh weight (35.4 g) of main root parts, but Japanese one had a more fresh weight (9.6 g) of the lateral root part. Each inorganic component was found more in the aboveground parts, regardless of the region and the content of K was the largest. Regarding the content of macroelements for each part of Codonopsis lanceolata, the content of Na, Mg, P, S, and Ca in Korean Codonopsis lanceolata was found the highest on the leaf, followed by stem and root. In the case of Japanese Codonopsis lanceolata, same result was found on the content of Mg and Ca, however, the highest content of Na and P was found in the stem.

This study was conducted to compare the growth, inorganic components, and proximate components of Codonopsis lanceolata grown in 10 regions of Korea for selecting superior species and breeding by crossing. Among the all tested lines, the shortest plant height (217.12 cm) was observed from the Ulleungdo region line (No. 4) while the longest (273.9 cm) was observed from Hwasun region line (No. 9). In addition, the lines of central and northern region (No. 1~No. 7) tend to have shorter plant height than those of southern region (No. 8~No. 9) except Jejudo region line (No. 10). Flowering tends to be late towards southern region, and lines in central and northern regions were started flowering about 2 weeks earlier than those in southern regions. However, the heaviest root weight was 13.1 g, found in only Jejudo line (No. 10) whereas there was no significant difference found in the other regions which have a range of 8.3~11.0 g. The inorganic components were varied in each line, however, proportion of macroelements, such as K, Ca, and P, was the largest for every line. Especially for Heongseong region line (No. 2), had larger proportion of macroelements than the others. There was a difference of proximate compositions of Codonopsis lanceolata, except the moisture content, among all regions, however, it was generally shown that the content of crude protein (1.31~3.76%) and crude fiber (2.18~3.12%) was the highest.