Background: Several factors contribute to shoulder pain, including abnormal neck posture, repeated use of the upper limbs, work involving raising the upper limbs above the head, and the effects of vibration. However, previous study has reported that constant vibration exposure could impact improvement of the stability on joints related with muscle recruitment and activation. For this difference reason, we need to verify for the complex study of relationship with repetitive upper limb movements, poor head posture, and constant vibration exposure. Objects: Our study was made to investigate the influence of vibration exposure on the shoulder muscle activity during forward-head and over-head tasks with isometric shoulder flexion. Methods: In a total of 22 healthy subjects, surface electromyography (EMG) data were collected from shoulder muscles (upper/lower trapezius, serratus anterior, and lumbar erector spinae) on tasks (neutral-head task [NHT], forward-head task [FHT], and over-head task [OHT]) with and without vibration exposure. Results: In all tasks, the EMG data of the upper trapezius and serratus anterior significantly increased with vibration exposure (p < 0.05). Furthermore, the EMG data of the lumbar erector spinae significantly increased with vibration exposure in the NHT and FHT (p < 0.05). Conclusion: We suggest that continuous vibration exposure during the use of hand-held tools in the tasks could be associated with harmful effects in the workplace. Lastly, we clinically need to examine the guidelines regarding the optimal posture and vibration exposure.

Although probiotics have been shown to improve health when consumed, recent studies have reported that they can cause unwanted side effects due to bacterial-human interactions. Therefore, the importance of prebiotics that can form beneficial microbiome in the gut has been emphasized. This study isolated and identified bacteria capable of producing biopoymer as a candidate prebiotic from traditional fermented foods. The isolated and identified strain was named WCYSK01 (Wissella sp. strain YSK01). The composition of the medium for culturing this strain was prepared by dissolving 3 g K2HPO4, 0.2 g MgSO4, 0.05 g CaCl2, 0.1 g NaCl in 1 L of distilled water. The LMBP(low molecular weight biopoymers) produced when fermentation was performed with sucrose and maltose as substrates were mainly consisted of DP3 (degree of polymer; isomaltotriose), DP4 (isomaltotetraose), DP5 (isomaltopentaose), and DP6 (isomaltoheptaose). The optimization of LMBP (low molecular weight of biopolymer) production was performed using the response surface methodology. The fermentation process temperature range of 18 to 32oC, the fermentation medium pH in the range of 5.1 to 7.9. The yield of LMBP production by the strain was found to be significantly affected by q fermentation temperature and pH. The optimal fermentation conditions were found at the normal point, and the production yield was more than 75% at pH 7.5 and temperature of 23oC.

Reliable evaluation of radioactivity inventory for the nuclear power plant components and residual materials is very important for decontamination and decommissioning. This can make it possible to define optimum dismantling approaches, to determine radioactive waste management strategies, and to estimate the project costs reasonably. To calculate radioactivity of the nuclear power plant structure, various information such as interest nuclide, cross-section, decay constant, irradiation time, neutron flux, and so on is required. Especially irradiation time and neutron flux level are very changeable due to cycle specific fuel loading pattern, the plant overhaul, cycle length. However most of the radioactivity calculations have generally been performed assuming one representative or average neutron flux during the lifetime of the nuclear power plant. This assumption may include excessive conservatism because the radioactivity level has the characteristics of saturation and decay. Therefore, considering these variables as realistically as possible could prevent overestimation. In order to perform realistic radioactivity calculation, we developed monthly relative power contribution factor applying plant-specific operation history and cycle-specific neutron flux. The factors were applied to the radioactivity calculation. The calculation results ware compared with measured values of the neutron monitors that were actually installed and withdrawn from the nuclear power plant. As a result of the comparisons, there are good agreements between the calculated values and measured values. These accurate calculation results of radioactivity could contribute to the establishment of radioactive waste dismantling strategies, the classification of radioactive waste, and the deposit of disposal costs for safe and reasonable decommissioning of the nuclear power plant.

Most of the wastes generated when dismantling nuclear power plant were contaminated with lowlevel radioactive materials, therefore, applying a plasma melting system is a good option to dispose of the complex wastes safely. Melting system with plasma technology was developed to dispose single metal or composite objects. Its purpose is to secure final emissions satisfying final treatment conditions by controlling oxidization/ reduction reaction condition in detail during the melting process. A hollow plasma torch applied at plasma melting system could be operated with various plasmaforming gasses such as N2, Air, Ar, O2, and etc. The melting furnace was designed based on a double sealing structure to prevent risk factors; such as leaks, etc. in the reaction condition. The effect of the external air inflow on the melting conditions was minimized by carefully designing the object input device, torch mounting part, final object discharge part, etc.

With the aging of nuclear power plants (NPPs) in 37 countries around the world, 207 out of 437 NPPs have been permanently shutdown as of August 2022 according to the IAEA. In Korea, the decommissioning of NPPs is emerging as a challenge due to the permanent shutdown of Kori Unit 1 and Wolsong Unit 1. However, there are no cases of decommissioning activities for Heavy Water Reactor (HWR) such as Wolsong Unit 1 although most of the decommissioning technologies for Light Water Reactor (LWR) such as Kori Unit 1 have been developed and there are cases of overseas decommissioning activities. This study shows the development of a decommissioning waste amount/cost/process linkage program for decommissioning Pressurized Heavy Water Reactor (PHWR), i.e. CANDU NPPs. The proposed program is an integrated management program that can derive optimal processes from an economic and safety perspective when decommissioning PHWR based on 3D modeling of the structures and digital mock-up system that links the characteristic data of PHWR, equipment and construction methods. This program can be used to simulate the nuclear decommissioning activities in a virtual space in three dimensions, and to evaluate the decommissioning operation characteristics, waste amount, cost, and exposure dose to worker. In order to verify the results, our methods for calculating optimal decommissioning quantity, which are closely related to radiological impact on workers and cost reduction during decommissioning, were compared with the methods of the foreign specialized institution (NAGRA). The optimal decommissioning quantity can be calculated by classifying the radioactivity level through MCNP modeling of waste, investigating domestic disposal containers, and selecting cutting sizes, so that costs can be reduced according to the final disposal waste reduction. As the target waste to be decommissioning for comparative study with NAGRA, the calandria in PHWR was modeled using MCNP. For packaging waste container, NAGRA selected three (P2A, P3, MOSAIK), and we selected two (P2A, P3) and compared them. It is intended to develop an integrated management program to derive the optimal process for decommissioning PHWR by linking the optimal decommissioning quantity calculation methodology with the detailed studies on exposure dose to worker, decommissioning order, difficulty of work, and cost evaluation. As a result, it is considered that it can be used not only for PHWR but also for other types of NPPs decommissioning in the future to derive optimal results such as worker safety and cost reduction.

Spent nuclear fuels in Korea are temporarily stored at the nuclear power plant site and it is expected that will become saturated from 2031. Deep geological disposal in engineered barrier system (EBS) is one of the most important options for disposing spent nuclear fuel. The disposal canister is the first barrier that prevents leakage of nuclides in the spent nuclear fuel to the environment. Therefore, the corrosion behavior of the canister materials are significant factors in determining the overall disposal period. Oxygen-free copper is the most widely used material for disposal canisters, and manufacturing methods include forging, cold spray, and electro-deposition. In this study, corrosion behavior of materials that have the potential to replace oxygen-free copper manufactured using various 3D printing method were analyzed. As a result of electrochemical analysis of various materials such as copper manufactured by the Atmospheric Plasma Spray (APS) process and Inconel 718 manufactured by the Direct Energy Deposition (DED) process, the possibility of replacing oxygen-free copper was confirmed.

Maintaining fuel sheath integrity during dry storage is important. Intact sheath acts as the primary containment barrier for both fuel pellets and fission products over the dry storage periods and during subsequent fuel handling operations. In KNF, in-house fuel performance code was developed to predict the overall behavior of a fuel rod under normal operating conditions. It includes the analysis modules to predict temperature, pellet cracking and deformation, sheath stress and strain at the mid-plane of the pellet and pellet-pellet interfaces, fission gas release and internal gas pressure. The main focus of the code is to provide information on initial conditions prior to dry storage, such as fission gas inventory and its distribution within the fuel pellet, initial volumes of storage spaces and their locations, radial profile of heat generation within the pellet, etc. To upgrade the developed code that address all the damage mechanisms, the first step was a review of the available technical information on phenomena relevant to fuel integrity. Potential degradation mechanisms that may affect sheath integrity of CANDU spent fuel during dry storage are: creep rupture under internal gas pressure, sheath oxidation in air environment, stress corrosion cracking (SCC), delayed hydride cracking (DHC), and sheath splitting due to UO2 oxidation for a defective fuel. The failure by creep rupture, SCC or DHC is in the form of small cracks or punctures. The failure by sheath oxidation or sheath splitting due to UO2 oxidation results in a gross sheath rupture. The second step was to examine the technical bases of all modules of the in-house code, identify and extend the ranges of all modules to required operating ranges. This step assessed the degradation mechanisms for the fuel integrity. The objective of this assessment is to predict the probability of sheath through-wall failure by a degradation mechanisms as a function of the sheath temperature during dry storage. Further improvements being considered include upgrades of the analysis module to achieve sufficient accuracy in key output parameters. The emphasis in the near future will be on validation of the inhouse code according to a rigorous and formal methodology. The developed models provide a platform for research and industrial applications, including the design of fuel behavior experiments and prediction of safe operating margins for CANDU spent fuel.

Currently, as the saturation capacity of wet storage pool for spent nuclear fuel (SNF) of PWR in Korea has reached approximately 75%, Dry Storage Facilities (DSF) are necessary for sustainable operation of nuclear power plants. It is necessary to develop acceptance requirements for the delivery of SNF from reactor storage site to Centralized DSF. To do this end, the mechanical integrity of SNF is directly related to its repacking, retrieving, and transporting/handling performances. And also, this integrity is a key factor associated with the criticality safety that is connected to the damaged status of SNF. According to the NUREG/CR-6835, the NRC expects that the potential for nuclear fuel failures will increase because of the increase of the fuel discharge burnup and the degradation of fuel and clad material properties. Due to such damages and/or degradation, the fuel rods in the fuel assembly may be extracted and empty for following treatments (transportation, storage, handling etc). This condition can have a detrimental effect on the criticality safety of SNF. Thus, this study investigated whether extracted and empty of damaged SNF rod affects criticality safety. In this analysis, it is assumed that up to four fuel rods are missed. As a result of the analysis, As the number of fuel rods miss up to a certain number, the value of multiplication factor value of the fuel assembly increases. In addition, since the fuel rods located at the outermost layer contained relatively less fissile material than the fuel rods located center of the lattice, and neutrons were lost by the absorption material, the effective multiplication factor value gradually decreased. Nevertheless, the criticality safety was assessed to be maintained.

Background: A spinal extension and intensive rehabilitation program reduced the symptoms and pain of kyphosis, and improved function. Objects: This study aimed to demonstrate the effect of a spine extension device on the degree of thoracic kyphosis and extension angles, confirm reduction of the kyphosis angle and an increase in flexibility. Methods: Thirteen adults were enrolled in the experiment, using the spine extension device, which was set to passively extend the spine. The angle between the spinous process of the first thoracic vertebra and the spinous process of the twelfth thoracic vertebra was measured by dual inclinometer before and after using the spine extension device. Results: In the static posture, the thoracic kyphosis decreased after using the spine extension device in the thoracic extension posture, and there was a significant difference (p < 0.05); thoracic extension angle increased with statistical significance (p < 0.05). Conclusion: In this study, the thoracic kyphosis angle and thoracic extension angle of the subjects before and after using spine extension device was compared and analyzed, which proved that the spine extension device can effectively improve the mobility of spinal extension.

According to Article 4 and 5 of the Nuclear Safety and Security Commission (NSSC) Notice No. 2020-6, radioactive waste packages should be classified by radioactive levels, and finally permanently shipped to underground or surface disposal facilities. The level of the radioactive waste package is determined based on the concentrations of the radionuclides suggested in Article 8 of NSSC Notice No. 2021-26. Since most of the radionuclides in radioactive wastes are beta nuclides, chemical separation and quantification of the target nuclides are essential. Conventional methods to classify chemically non-volatile radionuclides such as Tc-99, Sr-90, Nb- 94, Fe-55 take a lot of time (about 5 days) and have low efficiency. An automated non-volatile nuclide analysis system based on the continuous chemical separation method of radionuclides has been developed to compensate for this disadvantages of the conventional method in this study. The features of the automated non-volatile nuclide separation system are as follows. First, the amount of secondary waste generated during the chemical separation process is very small. That is, by adopting an open-bed resin column method instead of a closed-bed resin column method, additional fittings and connector are unnecessary during the chemical separation. In addition, because the peristaltic pump is supplied for the sample and solution respectively, it is great effective to prevent cross-contamination between radioactive samples and the acid stock solution for analysis. Second, the factors that may affect results, such as solution amount, operating time and flow rate, are almost constant. By mechanically controlling the flow rate precisely, the operating time and additional factors required during the separation process can be adjusted and predicted in advance, and the uncertainty of the chemical separation process can be significantly reduced. Finally, it is highly usable not only in the continuous separation process but also in the individual separation process. It can be applied to the individual separation process because the user can set the individual sequence using the program. As a result of the performance evaluation of the automation system, recovery rates of about 80–90% and reproducibility within 5% were secured for all of the radionuclides. Furthermore, it was confirmed that the actual work time was reduced by more than 50% compared to the previous manual method. (It was confirmed that the operation time required during the separation process was reduced from 6 days to 3 days.) Based on these results, the automation system is expected to improve the safety of workers in radiation exposure, reduce human error, and improve data reliability.