The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

With the aging of nuclear power plants (NPPs) in 37 countries around the world, 207 out of 437 NPPs have been permanently shutdown as of August 2022 according to the IAEA. In Korea, the decommissioning of NPPs is emerging as a challenge due to the permanent shutdown of Kori Unit 1 and Wolsong Unit 1. However, there are no cases of decommissioning activities for Heavy Water Reactor (HWR) such as Wolsong Unit 1 although most of the decommissioning technologies for Light Water Reactor (LWR) such as Kori Unit 1 have been developed and there are cases of overseas decommissioning activities. This study shows the development of a decommissioning waste amount/cost/process linkage program for decommissioning Pressurized Heavy Water Reactor (PHWR), i.e. CANDU NPPs. The proposed program is an integrated management program that can derive optimal processes from an economic and safety perspective when decommissioning PHWR based on 3D modeling of the structures and digital mock-up system that links the characteristic data of PHWR, equipment and construction methods. This program can be used to simulate the nuclear decommissioning activities in a virtual space in three dimensions, and to evaluate the decommissioning operation characteristics, waste amount, cost, and exposure dose to worker. In order to verify the results, our methods for calculating optimal decommissioning quantity, which are closely related to radiological impact on workers and cost reduction during decommissioning, were compared with the methods of the foreign specialized institution (NAGRA). The optimal decommissioning quantity can be calculated by classifying the radioactivity level through MCNP modeling of waste, investigating domestic disposal containers, and selecting cutting sizes, so that costs can be reduced according to the final disposal waste reduction. As the target waste to be decommissioning for comparative study with NAGRA, the calandria in PHWR was modeled using MCNP. For packaging waste container, NAGRA selected three (P2A, P3, MOSAIK), and we selected two (P2A, P3) and compared them. It is intended to develop an integrated management program to derive the optimal process for decommissioning PHWR by linking the optimal decommissioning quantity calculation methodology with the detailed studies on exposure dose to worker, decommissioning order, difficulty of work, and cost evaluation. As a result, it is considered that it can be used not only for PHWR but also for other types of NPPs decommissioning in the future to derive optimal results such as worker safety and cost reduction.

This study identified single nucleotide polymorphisms (SNPs) that affect the body weight of chickens. Analysis of body weight showed that the Cornish breed had the highest body weight, and the Korean native chicken (Gray Brown) had the lowest body weight. TSH is composed of an α-subunit and a β-subunit, and the TSH-β gene encoding the β-subunit has been reported to be associated with obesity. In chickens, it is located on chromosome 26 and is reported to be associated with growth. The calcium-sensing receptor gene (CaSR) plays a role in the regulation of extracellular calcium homeostasis and is responsible for calcium absorption in the urinary tract, which affects the eggshell quality in poultry. It was shown that TSH-β was strongly correlated with weight in Cornish and Korean native (Gray Brown) chickens, particularly in those with the CC trait. However, CaSR showed no association with body weight in poultry; it was associated with calcium and the eggshell. Thus, selection for TSH-β can be used to produce individuals with more favorable traits in terms of body weight.

The entomopathogenic fungus Metarhizium anisopliae B is a powerful biological control agent against Monochamusalternatus, a crucial mediator of the pinewood nematode Bursaphelenchus xylophilus. In this study, production of destruxins(dtxs), insecticidal cyclic hexadepsipeptides, was monitored in the submerged culture of M. anisopliae B. Three typesof dtxs, i.e., destruxin A, B, and E, were produced during the culture. Among the three dtxs, the production yield ofdestruxin A was best, followed by destruxin B and E. Destruxin A production was increased when pH was controlledat 6.0, whereas production of destruxin E was not affected by the pH control. The highest yield of dtxs A, B, and Ewere 16.4, 7.3, and 6.1 mg L-1, respectively. Considering that process for dtxs production has not been optimized, M.anisopliae B has more powerful implication as a biocontrol agent.

CD63, a member of tetraspanin membrane protein family, plays pivotal role in cell growth, motility, signal transduction, host-pathogen interactions and cancer. In this work, the cDNA encoding CD63 homologue (TmCD63) was cloned from larvae of coleopteran beetle, Tenebrio molitor. The cDNA is comprised of an open reading frame of 705 bp, encoding putative protein of 235 amino acid residues. In silico analysis shows that the protein has four putative transmembrane domains and one large extracellular loop. The characteristic ‘Cys-Cys-Gly’ motif and ‘Cys188’ residues are highly conserved in the large extracellular loop. Phylogenetic analysis of TmCD63 revealed that they belong to the insect cluster with 50-56% identity. Analysis of spatial expression patterns demonstrated that TmCD63 mRNA is mainly expressed in gut and Malphigian tubules of larvae and the testis of the adult. Developmental expression patterns of CD63 mRNA showed that TmCD63 transcripts are detected in late larval, pupal and adult stages. Interestingly, TmCD63 transcript was upregulated the maximum 4.5 fold in response to DAP-type peptidoglycan during the first 6 h, although other immune elicitors also made significant increase in the transcript level at later time-points. These results suggest that CD63 might contribute to T. molitor immune response against various microbial pathogens.

This study aims to examine the effects of taping of the ankle joint on the static and dynamic balance and gait ability of stroke patients. Twenty-six stroke patients receiving physical therapy at a hospital located in Gyeonggi-do were divided equally into a group that had taping in physical therapy and an ordinary physical therapy group. They exercised for 30 minutes each, 3 times per week for 8 weeks from June to August 2011. Romberg’s eye open and eye closed tests, limits of stability(LOS), forward and back test, timed up and go test(TUG) and 10-meter gait velocity test were performed to evaluate static balance, dynamic balance, and gait ability, respectively, prior to and 8 weeks after the intervention. Differences within each group in relation to the lapse of time were compared by a paired t-test. Differences between the two groups were compared by an independent t-test. Regarding comparison of differences within each group, all tests resulted in significant changes in both groups after the intervention (p<.05). Comparison of differences between the two groups showed that taping in the physical therapy group had significantly better test results than the ordinary physical therapy group in all measured items(p<.05). The after effects of ankle taping on stroke patients are more efficient and effective than ordinary physical therapy alone in improving balance and gait ability.

The aim of this study was to investigate the correlation among bone mineral density(BMD), body composition and body circumference on 20's college women in Hwaseong. A total of 86 subjects were measured with BMD and body composition and body circumference. To evaluate the correlation between BMD and body composition, bone density and body weight, body mass index(BMI), lean body mass, muscle mass, fat mass and body fat mass were compared. The results of this study, weight was considered the strong correlation with BMD than the height and BMI seems to be greater significance rather than the lumbar spine and femur BMD. In addition, the relationship between body composition and BMD, lean body mass, muscle mass, body fat mass were the most relevant factors and BMD. The relationship between BMD and body circumference that have been difficult because of not enough previous studies but somewhat the study showed that association.

This study was carried out to identify how a self-stretching exercise program affects pain for each body area, pain relief and job satisfaction for care workers. 20 of 40 care workers with musculoskeletal symptom were randomly selected and participated a self-stretching exercise program consisting of 15 motions. The intervention was done five times or more per weeks for 8 weeks and 1 session lasted within 15 minutes. 'Musculoskeletal symptom survey table' of the Korea Occupational Safety and Health Agency(KOSHA) and JDI(Job Descriptive Index) was used for pain on the musculoskeletal symptom and job satisfaction. Survey were done twice before and after the program. The result of this study showed that self-stretching exercise program group(SSPG) relieved from pain significantly in the shoulders(p<.01) and lumbar(p<.05), comparing to the non selfstretching exercise program group(NSPG). Although no significant difference on variations in the JDI appeared in SSPG, the significant reduction appeared from the colleague relationship and organization in NSPG(p<.05). SSPG showed the significant increase on variations in JDI from the job and organization comparing to NSPG. Especially, the improvement on satisfaction for the organization was shown(p<.05). Accordingly, the self-stretching exercise program for care workers can be said to positively affect the overall pain relief and increase on the JDI.

The purpose of this study was to investigate the influence of handicraft activities on hand promptness and grasp in the elderly. Subjects were comprised of 14 senior citizens between the ages of 70-85, with 7 subjects in the experiment group and 7 in the control group. Subjects in the experiment group practiced various handicrafts twice a day, while those in the control group did not participate in any special activity. The Jebsen Taylor Hand Function Test was used to evaluate the results, while a dynamometer and pinch gauge were used to measure hand promptness and grasp. The 7 senior citizens in the experiment group were able to increase their hand promptness and grasping skills. Conclusively, handicrafts can help improve hand promptness and grasp in the elderly. Furthermore, the development and improvement of such skills can have a positive influence on the daily lives of senior citizens. Such skills are expected to improve the overall neuro-function in the elderly population.

Hereditary dentin defects consists of dentin dysplasia(DD) and denti nogenesis imperfecta(Dr) ‘ The Dl associated with osteogenesis imperfecta has been classified as DI type 1. whereas isolated inherited defects have been categori zed as DI types II and III , However‘ whether DI type III should be considered a distinct phenotype 01' a variation of DI type 1I is debatable , Recent genetic findings have focused attention on the role of the dentin sialo phosphoprotein(DSPP) gene in the etiology of inherited defects of tooth dentin, We have identified novel mlltation( c,727G - > A, p,D243N) at the 243th codon of exon 4 of the DSPP gene in a Korean patient with DI type III The radiographic and histologic features of the patient revealed the classic phenotype of shell teeth These findings sllggest that DI type II and III are not separate diseases bllt rather the phenotypic variation 01' a s ingle disease

This study aimed to investigate the effect of different light-emitting diode (LED) on the stress response of workers before and after a flower arrangement (FA) activity. Participants were 16 office workers who performed FA under 7 out of 8 LED lighting conditions: darkness, white (at correlated color temperature of 4,500 K), red, blue, green, magenta, cyan, and yellow; no FA is performed in the darkness condition. To identify significant differences among the different lighting conditions, the heart rate (HR), blood pressure (BP), heart rate variability (HRV) consisting of standard deviation of the normal-normal intervals (SDNN), total power (TP), ratio of the low and high frequency (LF/HF), and blood pressure were measured before and after FA. The salivary cortisol level was analyzed immediately after FA. The correlations among HR, HRV, and cortisol showed that the blue and green lights positively affected stress-responses and caused considerable reduction of stress. However, there was only a minor significant difference among other lighting colors, although individual lights may impact one or more parameters. These findings reflect that the methodologies and results of this study can be effectively used to achieve a highly active horticultural therapy with the constructive assistance of LED lighting colors.

Soybean seeds contain high amounts of isoflavones that display biological effects and isoflavone content of soybean seed can vary by year, environment, and genotype. Objective of this study was to identify quantitative trait loci that underlie isoflavone content in soybean seeds. The study involved 85 F2 populations derived from Korean soybean cultivar 'Kwangkyo' and wild type soybean 'IT182305' for QTL analysis associated with isoflavone content. Isoflavone content of seeds was determined by HPLC. The genetic map of 33 linkage groups with 207 markers was constructed. The linkage map spanned 2,607.5 cM across all 33 linkage groups. The average linkage distance between pair of markers among all linkage groups was 12.6 cM in Kosambi map units. Isoflavone content in F2 generations varied in a fashion that suggested a continuous, polygenic inheritance. Eleven markers (4 RAPD, 3 SSR, 4 AFLP) were significantly associated with isoflavone content. Only two markers, Satt419 and CTCGAG3 had F-tests that were significant at P<0.01 in F2 generation for isoflavone content. Interval mapping using the F2 data revealed only two putative QTLs for isoflavone content. The peak QTL region on linkage group 3, which was near OPAG03c, explained 14~% variation for isoflavone content. The peak QTL region on linkage group 5, which was located near OPN14 accounted for 35.3~% variation for isoflavone content. Using both Map-Maker-QTL (LOD~geq2.0) and single-factor analysis (P~leq0.05) , one marker, CTCGAG3 in linkage group 3 was associated with QTLs for isoflavone content. This information would then be used in identification of QTLs for isoflavone content with precision