This study presents a rapid and sequential radiochemical separation method for Pu and Am isotopes in radioactive waste samples from the nuclear power plant with anion exchange resin and TRU resin. After radionuclides were leached from the radioactive waste samples with concentrated HCl and HNO3, the sample was allowed to evaporate to dryness after filtering the leaching solution with 0.45 micron filter. The Pu isotopes were separated in HNO3 medium with anion exchange resin. For leaching solution passed through anion exchange column, the Am isotopes were separated with TRU resin. The purified Pu and Am isotopes were measured by alpha spectrometer, respectively, after micro-precipitation of neodymium. The sequential radiochemical separation of Pu and Am isotopes in radioactive waste samples using anion exchange resin and TRU resin was validated with ICP-MS system.

A new annual dose evaluation system called E-DOSE has been developed. The system is based on the methodology of the previous version, K-DOSE60, which uses the dose evaluation methods of the International Commission on Radiological Protection (ICRP-60). However, E-DOSE is coded in ABAP to be compatible with the KHNP’s enterprise resource planning (ERP) system, SAP. This allows E-DOSE to use the real-time data from SAP, which minimizes the need for user intervention. The socio-environmental data, which was previously managed by the staff of each plant sites, can now managed in the system in a centralized manner. This is a significant improvement over the previous system, as it reduces the risk of errors and makes it easier to track and manage data. The system also automatically generates the reports required by regulations. EDOSE is expected to minimize the occurrence of human errors in preparing and managing the input data. This is because the system uses the data from SAP, which is less prone to errors than manually entered data. Additionally, the automatic generation of reports reduces the risk of errors in report preparation. E-DOSE is also expected to improve work efficiency. This is because the system automates many of the tasks involved in annual dose evaluation, such as data entry, calculation, and report generation. Overall, E-DOSE is a significant improvement over the previous annual dose evaluation system. It is more efficient, accurate, and user-friendly.

When the parent radionuclide decays, the progeny radionuclide is produced. Accordingly, the dose contribution of the progeny radionuclide should be considered when assessing dose. For this purpose, European Commission (EC) and International Atomic Energy Agency (IAEA) provide weighting factors for dose coefficient. However, these weighting factors have a limitation that does not reflect the latest nuclide data. Therefore, in this study, we analyzed the EC and IAEA methodology for derivation of weighting factor and used the latest nuclide data from ICRP 107 to derive weighting factors for dose coefficient. Weighting factor calculation is carried out through 1) selection of nuclide, 2) setting of evaluation period, and 3) derivation based on ICRP 107 radionuclide data. Firstly, in order to derive the weighting factor, we need to select the radionuclides whose dose contribution should be considered. If the half-life of progeny radionuclides sufficiently short compared to the parent radionuclide to achieve radioactive equilibrium, or if the dose coefficient is greater of similar to that of the parent radionuclide and cannot be ignored, the dose contribution of the progeny radionuclide should be considered. In order not to underestimate the dose contribution of progeny radionuclides, the weighting factors for the progeny nuclides are taken as the maximum activity ratio that the respective progeny radionuclides will reach during a time span of 100 years. Finally, the weighting factor can be derived by considering the radioactivity ratio and branch fraction. In order to calculate the weighting factor, decay data such as the half-life of the radionuclide, decay chain, and branch fraction are required. In this study, radionuclide data from ICRP 107 was used. As a result of the evaluation, for most radionuclides, the weighting factors were derived similarly to the existing EC and IAEA weighting factors. However, for some nuclides, the weighting factors were significantly different from EC and IAEA. This is judged to be a difference in the half-life and branch fraction of the radionuclide. For example, in the case of 95Zr, the weighting factor for 95mNb showed a 35.8% difference between this study and previous study. For ICRP 38, when 95Zr decays, the branch fraction for 95mNb is 6.98×10-3. In contrast, for ICRP 107, the branch fraction is 1.08×10-2, a difference of 54.7%. Therefore, the weighting factor for the dose coefficient based on ICRP 107 data may differ from existing studies depending on the half-life and decay information of the nuclide. This suggests the need for a weighting factor based on the latest nuclide data. The results of this study can be used as a basis for the consideration of dose contributions for progeny radionuclides in various dose assessments.

The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

This study investigates the behavior of bentonite, used as a buffer material in deep geological disposal systems, in the context of pore morphology under the influence of field-collected groundwater conditions. The bentonite was processed into block form using cold isostatic press (CIP) and subsequently analyzed for its pore morphology in situ using synchrotron X-ray computed tomography (CT) within the field-collected groundwater environment. Bentonite buffers play a critical role in deep geological disposal systems by preventing contact between disposal containers and groundwater. Bentonite typically exhibits swelling upon contact with water, forming few layers of water molecules between its structural layers. However, the presence of ions such as K+ and Cl- can lead to a sharp reduction in swelling pressure. Loss of swelling pressure could negatively impact the integrity of future deep geological disposal systems, making its assessment crucial. This study involves processing various types of bentonite, including natural Na-type bentonite, into block forms and subjecting them to exposure in both deionized water and field-collected groundwater conditions. Internal pore morphology changes were measured using Xray CT technology.

Korea Atomic Energy Research Institute’s Post Irradiated Examination Facility safely stores spent nuclear fuel using a wet storage method to conduct research. Here, in order to remove the radioactivity released into the water, the stored water is passed through an ion exchange resin tower, and the radionuclides are exchanged with the bead-shaped ion exchange resin filled inside to lower the radioactivity concentration. At this time, because the stored water passes in one direction, clogging of the ion exchange resin occurs. If this phenomenon continues, the flow rate of the water treatment process decreases and operation efficiency decreases, so a backwashing process is necessary to re-mix the ion exchange resin and secure the flow rate again. In this study, the flow rate reduction trend according to the lifespan of the ion exchange resin and the flow rate recovery according to the backwash process operation amount were analyzed. The flow rate reduction trend of the ion exchange process was analyzed immediately after the backwashing process was started. In addition, the amount of flow recovery according to the backwash process operation amount was evaluated by the amount of waste generated during the backwash process and the number of days of operation until the backwash process was needed again. As a result, the flow rate of the ion exchange process decreased rapidly right after the backwash process until the position of the ion exchange resins was stabilized, and then stabilized. After that, it gradually decreased and reached the point where the backwash process was necessary. However, the decline trend was analyzed to be the same regardless of the lifespan of the ion exchange resin. In addition, the amount of waste generated during the operation of the backwash process was increased in the order of 400 L, 600 L, 1,100 L, 1,400 L, 3,500 L, and 4,200 L to increase the amount of operation of the backwash process. As a result, the number of days of ion exchange resin operation was 285 days, 338 days, and 342 days, was analyzed as 422 days, 322 days, and 720 days. Based on this study, it was confirmed that the flow rate reduction trend is the same regardless of the lifespan of the ion exchange resin, and as the backwash process operation increases, the number of days the ion exchange process can be operated increases, but there is a turning point where the waste treatment cost exceeds the number of days of operation.

In Korea, most temporary storage facilities for spent nuclear fuel are nearing saturation. As an alternative to this, the 2nd basic plan for high-level radioactive waste management specified the operation plan of dry interim storage facility. Meanwhile, the NSSC No. 2021-19 stipulates that it is necessary to evaluate the possibility and potential effect of accident before operating interim storage facility. Therefore, this study analyzed the categories of accident scenarios that may occur in dry storage facility as part of prior research on this. We investigated the case of categorization of dry storage facility accident scenarios of IAEA, NRC, KAREI, and KINS. The IAEA presented accident scenarios that could occur in on-site dry storage facility operated with silo and cask method. NRC has classified accident scenarios in dry storage facility and estimated the probability of accidents for each. KAERI and KINS selected major accident scenarios and analyzed the processes for each, in preparation for the introduction of dry storage facility in Korea in the future. Overall, a total of 10 accident scenarios were considered, and the scenarios considered by each institution were different. Among 10 scenarios, cask drop and aircraft collision were included in the categorization of most institutions. The results of this study can be used as basic data for cataloging accidents subject to safety evaluation when introducing dry interim storage facility in Korea in the future.

자생식물은 관상용, 약용, 식량자원으로 활용될 수 있는 잠재력을 지닌 고유 유전자원이다. 돌부추(Allium koreanum H.J. Choi & B.U. Oh)는 우리나라 해안 암반지대에 분포하는 자생식물 중 하나로, 기후변화와 서식지 감 소로 인해 보전 가치가 높은 식물이다. 이번 연구는 온도와 과산화수소가 돌부추의 발아에 미치는 영향을 조사하기 위해 수행되었다. 종자를 무처리(대조군) 또는 1% 과산화수소(H2O2)로 90분간 처리한 종자를 준비해 15, 20, 25°C 로 설정된 식물 생장 챔버에 배치하였다. 그 결과, 파종 23일 후 15°C에서 42%인 발아율이 20°C와 25°C에서 각각 18%와 0%인 발아율보다 2배 이상 높았으며, H2O2 처리 여부와 관계없이 15°C에서 발아율이 42%로 가장 높았다. H2O2 처리와 관계없이 최종 발아율 50%(T50)에 도달하는 일수는 20°C에서 가장 짧았지만, 일평균 발아율(MDG)은 15°C에서 가장 높았다. 따라서 1%의 H2O2 처리는 돌부추의 발아율에 큰 영향을 미치지 않았으며, 15°C의 온도가 돌부추의 발아율을 높이는 데 최적인 것으로 판단된다. 본 연구 결과는 돌부추의 발아를 위한 기초 연구 자료로 활 용될 수 있을 것으로 기대된다.

Entomopathogenic fungi are used to produce raw materials by applying solid culture technology using grains. But there are various problems such as low production efficiency and cross-contamination. Solvum Co., Ltd. conducted research on liquid culture technology to develop a method that can overcome these shortcomings of solid culture technology. We conducted research and development on using Beauveria bassiana 331R to observe the culture according to the seed inoculation amount in a 30 L fermenter, it was carried out at 1.0 % (v/v) and 10.0 % (v/v). Although there was a difference of 1 day, 1.0 %(v/v) seed inoculation was observed to be more than twice that, and active blastospores and yield were observed at over 95.0 %. As a results, it was determined that cost and efficient production would be possible during the culture process in mass production. Based on these experiments, a 300 L fermenter was cultured with 1.0 % (v/v) seed inoculation, resulting in a yield of 1.24E+09 CFU/mL on the 6th day of cultivation. As a result of freeze-drying using the final culture medium, it was confirmed that the production yield was improved by 113.0 % compared to the control.

본 연구는 주변 환경의 차이에 따른 화분매개곤충의 유입 특성을 파악하기 위하여 국립수목원 내 진화속을걷 는정원과 부추속전문전시원에 식재된 울릉산마늘의 화분매개곤충을 조사하였다. 2023년 5월 22일부터 6월 2일 까지 꽃이 70% 이상 개화하였을 때 포충망을 활용하여 8일간 곤충을 채집하였고, 각 전시원 별 식생(피도), 기후 (온도·습도·조도)를 조사하였다. 조사 결과 진화속을걷는정원에서 피도 60% 온도 26.4℃, 습도 31.5%, 조도 40953.6lx, 화분매개곤충 20과 450개체, 부추속전문전시원은 피도 90%, 온도 25.6℃, 습도 31.6%, 조도 6387lx, 화분매개곤충 15과 196개체로 나타났다. 온도와 조도가 상대적으로 높은 진화속을걷는정원이 채집된 곤충의 다양성과 방문 빈도가 높았다. 시간대별 곤충의 방문 빈도를 비교해본 결과 온도와 조도는 개체수가 증가할 때 같이 증가하는 경향을 보였으며, 습도는 반대의 경향을 보였다.

The family Periscelididae Oldenberg is reported for the first time from Korean fauna along with three nominate species, Cyamops hotei Sueyoshi, 2004, Stenomicra angustiforceps Sabrosky, 1965 and S. fascipennis Malloch, 1927. Stenomicra have been collected at grassy areas, whereas Cyamops have been founded near wet habitats. The descriptions and illustrations of external features of these species are provided here.

The genus Acymatopus Takagi is reported for the first time from Korean fauna along with two nominate species, A. minor Takagi, 1965 and A. takeishii Masunaga, Saigusa & Yang, 2005. This genus belonging to the subfamily Hydrophorinae in the family Dolichopodidae, is comprised of only six species in the world and distributed only in Japan and China yet. Both adults and larvae of this genus are known to be found on rugged and rocky marine shores of the tidal zone. The authors found the first recorded species in the west seaside of Korea, where many barnacles are inhabited. The descriptions and illustrations of external features including male genitalia of newly recorded species are provided here.

The genus Kurahashiodes is a monotypic genus that only recorded in Japan with Kurahashiodes suenagai. This species was first known by Wohlfahrtiodes suenagai in 1994, but reorganized with the new genus Kurahashiodes by Verves in 2001. Kurahashiodes was close to genus Wohlfahrtia but can be distinguished by R1 haired, surstylus narrow, phallus without ventral protuberance. This genus is reported for the first time in Korean fauna. The diagnosis and photographs of the Kurahashiodes suenagai are provided herein.

Smartphone camera quality has been progressing alongside the advancement of the smartphone market. Consequently, there has sparked interest in macro photography of insects using smartphones either through using built-in "macro mode" or accessories like macro lenses, mounts, and auxiliary lighting. However, some limitations have become apparent, including challenges in capturing small insects, a short focal distance of no more than 10 cm, a narrow focus range, and lower image quality compared to dedicated cameras. We introduce an effective knowhow to these problems when taking pictures of insects in the field using a smartphone. And it provides a manual for tele-macro photography in the field, and suggestions for the future direction of smartphone and accessory development.

The genus Norbanus Walker 1843 (Pteromalidae: Pteromalinae) consists of 38 species distributed worldwide. Among them, 13 species have been described from the West and Central Palaearctic (Noyes 2003). Norbanus is one of several pteromalid genera that shares the character of a narrow spicula on the clava. In Korea, only one species in the genus Norbanus is recorded. In this study, we report Norbanus meridionalis for the first time in South Koera. We provided description and diagonostic illustration of Norbanus meridionalis.

The genus Brachydeutera Loew, 1862 is a small group of acalyptratae flies belonging to the subfamily Ephydrinae in the family Ephydridae. Up to now, 16 described species have been recorded worldwide, and although it occurs in all fauna regions, it is most diverse in the subtropics and tropics, particularly in Africa and Asia. This genus is recorded for the first time in the Korean fauna based on the discovery of a nominated species, Brachydeutera meridionalis (Rondani, 1856). Diagnoses, figures of morphological features, and an ecological photograph of the firstly recorded species are provided herein.

Since 1997, the Republic of Korea (ROK) has been developing pyro-processing (Pyro) technology to reduce the disposal burden of high-level radioactive waste by recycling spent nuclear fuel (SNF). Compared to plutonium and uranium extraction process, Korean Pyro technology has relatively excellent proliferation resistance that cannot separate pure plutonium owing to its intrinsic characteristics. Regarding Pyro technology development of ROK, the Bush administration considered that Pyro is not reprocessing under the Global Nuclear Energy Partnership, whereas the Obama administration considered that Pyro is subject to reprocessing. However, the Bush and Obama administrations did not allow ROK to conduct full Pyro activities using SNF, even though ROK had faithfully complied with international nonproliferation obligations. This is because the US nuclear nonproliferation policy to prevent the spread of sensitive technologies, such as enrichment and reprocessing, has a strong effect on ROK, unlike Japan, on a bilateral level beyond the NPT regime for non-proliferation of nuclear weapons.

This study examines and proposes standardization approaches to address the heterogeneous issues of metadata in drone imagery within the agricultural sector. Image metadata comes in various formats depending on different camera manufacturers, with most utilizing EXIF and XMP. The metadata of cameras used in fixed-wing and rotary-wing platforms, along with the metadata requirements in image alignment software, were analyzed for sensors like DJI XT2, MicaSense RedEdge-M, and Sentera Double4K. In the agricultural domain, multispectral imagery is crucial for vegetation analysis, making the provision of such imagery essential. Based on Pix4D SW, a comparative analysis of metadata attributes was performed, and necessary elements were compiled and presented as a proposed standardization (draft) in the form of tag information.

In 2022, research for native prokaryotic species in Korea reported 10 unrecorded bacterial strains affiliated to phyla Actinomycetota, Bacillota, and Pseudomonadota. The strains formed monophyletic clades with the most closely related species (with ≥98.7% sequence similarity) in the 16S rRNA gene sequencing. Among them, four species of the phylum Actinomycetota, two species of the phylum Bacillota, and four species of the phylum Pseudomonadota have not been reported in Korea, suggesting unrecorded species in Korea. Information on strains such as Gram staining reaction, colony and cell morphology, biochemical characteristics, and isolation sources were provided in the species description.