The crisis of climate change aroused international needs to reduce the greenhouse gas emission in energy sector. Government of South Korea formulated an agenda of carbon neutrality through announcing 2050 Net-Zero Carbon Scenario A and B in October 2021. As the power supply from renewable energy increases, it becomes a core element to take into account the daily intermittency of renewable energy in analyzing the upcoming energy plans. However, the existing yearly Load Duration Curve is insufficient for applying day and night power change in daily scale into energy mix analysis, since it derives the energy mix for whole year on the basis of classifying annual base load and peak load. Therefore, a new energy mix simulation model based on the daily power load and supply simulation is needed for the future energy analysis. In this study we developed a new model which simulates the average power supply and demand daily (over a 24 hour period) for each season. The model calculates the excess and shortage power during day and night by integrating each energy’s daily power pattern. The 2050 Net-Zero Carbon Scenario A was used for the model verification, during which the same amounts of power production from each energy source were applied: nuclear, renewable, carbon-free gas turbine, fuel cell and byproduct gas. Total power demand pattern and renewable energy production pattern were drawn from the data of 2017 power production, and Pumped-storage Hydroelectricity and Energy Storage System were used as day-to-night conversion. Detailed assumptions for each energy were based on the Basis of Calculation for Net-Zero Carbon Scenario from Government. The model was verified with three cases which were divided depending on the method of hydrogen production and whether the Curtailment and Conversion Loss (CCL) of renewable energy were considered or not. Case 1 assumed production of hydrogen occurred for 24 hours while not considering CCL, had 0% relative error in comparison of total annual power production, and case 2, considering CCL, had a 1.741% relative error. Case 3 assumed production of hydrogen occurred only during daytime with excess power and CCL consideration, yielded 0.493% relative error in total amount of hydrogen production, confirming that the model sufficiently describes the Government’s Scenario A with the input of total power production. This model is expected to be used for analyzing further energy mix with different ratios of each energy source, with special focus on nuclear and renewable energy sources.

Background: The transcutaneous electrical nerve stimulation (TNES) is the most used non-invasive treatment method in physical therapy. As the mobile TENS (MTENS) has become popular, patients with pain have started using MTENS to reduce pain. Objectives: To evaluate pain, range of motion, and muscle strength before and after using MTNES in patients with wrist pain. Design: Quasi-experimental research. Methods: We conducted an experiment with 80 patients; 15 patients were dropped out, and 35 and 30 patients were evaluated in the experimental group (EG) and control group (CG), respectively. Before and after using MTENS for 4 weeks, patients were evaluated using visual analogue scale (VAS), grip power, range of motion (ROM), and digital infrared thermography imaging (DITI). In the EG, electricity was applied for the MTENS device, while electricity was not applied in the CG. Results: A significant difference in pain reduction was observed between the EG and CG. In the EG, a significant difference in grip strength was also noticed before and after using the MTENS; patients showed significantly increased power grip and tip pinch. A significant difference was observed in pre-rest and post-test wrist ROM and DITI values. Conclusion: MTENS is an appropriate procedure for patients with wrist pain.

The acoustic emission (AE) is proposed as a feasible method for the real-time monitoring of the structural damage evolution in concrete materials that are typically used in the storage of nuclear wastes. However, the characteristics of AE signals emitted from concrete structures subjected to various environmental conditions are poorly identified. Therefore, this study examines the AE characteristics of the concrete structures during uniaxial compression, where the storage temperature and immersion conditions of the concrete specimens varied from 15℃ to 75℃ and from completely dry to water-immersion, respectively. Compared with the dry specimens, the water-immersed specimens exhibited significantly reduced uniaxial compressive strengths by approximately 26%, total AE energy by approximately 90%, and max RA value by approximately 70%. As the treatment temperature increased, the strength and AE parameters, such as AE count, AE energy, and RA value, of the dry specimens increased; however, the temperature effect was only minimal for the immersed specimens. This study suggests that the AE technique can capture the mechanical damage evolution of concrete materials, but their AE characteristics can vary with respect to the storage conditions.

Bovine mammary epithelial (MAC-T) cells are commonly used to study mammary gland development and mastitis. Lipopolysaccharide is a major bacterial cell membrane component that can induce inflammation. Autophagy is an important regulatory mechanism participating in the elimination of invading pathogens. In this study, we evaluated the mechanism underlying bacterial mastitis and mammary cell death following lipopolysaccharide treatment. After 24 h of 50 μg/mL lipopolysaccharide treatment, a significant decrease in the proliferation rate of MAC-T cells was observed. However, no changes were observed upon treatment of MAC-T cells with 10 μg/mL of lipopolysaccharide for up to 48 h. Thus, upon lipopolysaccharide treatment, MAC-T cells exhibit dose-dependent effects of growth inhibition at 10 μg/mL and death at 50 μg/mL. Treatment of MAC-T cells with 50 μg/mL lipopolysaccharide also induced the expression of autophagy-related genes ATG3, ATG5, ATG10, ATG12, MAP1LC3B, GABARAP-L2, and BECN1. The autophagy-related LC3A/B protein was also expressed in a dose-dependent manner upon lipopolysaccharide treatment. Based on these results, we suggest that a high dose of bacterial infection induces mammary epithelial cell death related to autophagy signals.

털부처꽃(Lythrum salicaria L.)은 전국에 분포하는 다년생 초본식물로 척박하고 습한 지역을 포함한 다양한 환경에서 잘 자라는 것으로 알려져 있다. 따라서 하천변, 척박지에서 정원 용, 화훼용 및 관상용 식물로 이용이 가능하다. 본 연구는 털 부처꽃의 적정 육묘 조건(토양종류, 플러그 트레이 셀 크기,파종립수, 액비농도 및 차광)을 조사하였다. 대조구(원예상토) 에서 재배된 유묘의 생육이 가장 우수하였다. 반면 피트모스 와 펄라이트의 혼합용토는 육묘기간이 지속되면서 생육수치 가 감소하는 경향을 나타냈다. 셀 크기는 용적이 가장 큰 162 셀에서 재배된 유묘의 생육이 우수하였으나, 200셀과 288셀에 서 자란 묘도 건강했다. 한편 유묘의 결주발생을 고려하면 셀 당 2립을 파종하는 것이 적합하였다. 액비 처리는 유묘의 생 육을 촉진하였다. 특히 Hyponex 1000배는 초장, 줄기직경, 엽수, 마디수, 근장, 지상부 생체중 및 지하부 생체중을 증가 시켰다. 또한 유묘의 생육은 55% 차광 하에서 우수하였다. 따 라서 털부처꽃의 가장 효과적인 생육조건은 원예상토가 충진 된 288셀 플러그 트레이에 셀 당 2립을 파종하고 Hyponex 1000배를 시비하면서 55% 차광 하에서 재배하는 것이었다.

본 연구는 장미 ‘Bubble Gum’에 대한 수확 후 LED 광 환경 과 살균제 Azoxystrobin 보존용액 처리 시 절화품질에 미치는 영향을 구명하고자 수행되었다. 광은 백색 LED와 유색 LED (red:blue=5:1)로 처리하였고, 보존용액은 수돗물(tap water, TW)과 Azoxystrobin 0.05 mL･L-1를 처리하였다. 백색 LED처 리의 절화수명은 TW, Azoxystrobin처리구 각각 9.6일, 9.7일 로 LED 광과 보존용액 처리 간의 유의차가 없었다. 유색 LED 처리의 절화수명은 TW처리구가 13.6일, Azoxystrobin처리구 가 9.8일로, 유색 LED 처리구가 대조구(백색 LED + TW)에 비해 절화수명을 4일 연장시켰다. 절화수명 종료 증상은 LED 광 조건과 관계없이 Azoxystrobin처리구는 꽃잎 위조와 청변 화 증상을 감소시켰다. 모든 처리구에서 상대생체중과 수분흡 수율은 각각 처리 후 2일, 4일까지 증가하다 감소하는 경향을 보였다. 수확 직후 대비 처리 6일 후 화색 변화율과 잎의 엽록 소 함량은 수확 직후와 모든 처리구에서 차이가 없었으며, 화 폭증가율도 처리 간 차이가 없었다. 결론적으로 백색 LED + Azoxystrobin 보존용액처리는 절화장미의 꽃잎 위조와 청변화 증상을 감소시키지만, 절화수명 연장효과가 없었으며, 적색 +청색 LED 처리는 장미의 절화수명 연장효과에 효과적이었다.

본 연구에서 Periphyllus acerihabitans를 국내에서 최초로 보고한다. 이 종의 분포지역, 기주식물, 무시성충의 형태학적 정보와 분류키를 제공 하였다.