The Stockholm Convention was adopted in Sweden in 2001 to protect human health and the environment, including Persistent Organic Pollutants Rotors, such as toxic and bioaccumulative. Currently, there are 28 kinds of materials. This prohibits and limits the production, use, and manufacture of the product. Korea is a party to the Convention and it is necessary to prepare management and treatment plan to cope with POPs trends. In the text, we have discussed HCBD materials. HCBD belongs to halogenated aliphatic unsaturated hydrocarbons. It is a toxic, organic mixture of bioaccumulation. A study on the treatment of waste containing HCBD substance, We decided to treat the waste containing HCBD thermally. So six samples were selected. Waste water treatment sludge, rubber plate, insecticide, tarpaulin, tire rubber, mixed sample. The tire rubber injected HCBD as a technical sample. HCBD analysis showed that 59.345 ~ 18,238.355 ug/kg was detected. For the thermal treatment, we analyzed element. As a result of thermogravimetric analysis, the weight change due to the decomposition of the material started at 200℃. The material decomposition was completed within 800℃. The thermal treatment was performed on a Lab-scale (1kg/hr). After exhaust gas analysis result, HCBD was detected at 0.01 to 0.09 ug/kg. The decomposition rate is estimated to be 99.848 ~ 99.999%. As a result of dioxin analysis in the exhaust gas, the highest concentration was found in the tarpaulins and the emission limit was exceeded. The concentrations of Cd, Pb, Cr, Cu, Ni and Zn in the residues were very low. Considering the decomposition rate of HCBD containing wastes, incineration treatment at 2 ton/hr or more is considered to be possible. And unintentional persistent organic pollutants such as dioxins in the exhaust gas. Therefore, it is considered safe to operate the incineration temperature at more than 1100℃.

To achieve energy efficiency improvement is used to lower temperature for emission gas at catalyst inlet, or to reduce/stop using steam to reheat emission gas. Saved energy from this process can be used as power source in order to increase generation efficiency. Dry emission gas treatment, on the other hand, is the technology to increase generation efficiency by using highly efficient desalination materials including highly-responsive slaked lime and sodium type chemicals in order to comply with air pollution standards and reduce used steam volume for reheating emission gas. If dry emission gas is available, reheating is possible only with the temperature of 45℃ in order to expect generation efficiency by reducing steam volume for reheating. Retention energy of emission gas from combustion is calculated by emission gas multiplied by specific heat and temperature. In order to obtain more heat recovery from combustion emission gas, it is necessary to reduce not only exothermic loss from boiler facilities but emission calorie of emission gas coming out of boiler facilities. In order to reduce emission calorie of emission gas, it is efficient to realize temperature lowering for the emission gas temperature from the exit of heat recovery facility and reduce emission gas volume. When applying low temperature catalysts, the energy saving features from 0.03% to 2.52% (average 1.28%). When increasing the excess air ratio to 2.0, generation efficiency decreases by 0.41%. When the inlet temperature of the catalyst bed was changed from 210℃ to 180℃, greenhouse gas reduction results were 47.4, 94.8, 118.5, 142.2 thousand tons-CO2/y, CH4 was calculated to be 550.0, 1100.1, 1375.1, 1650.1 kg-CH4/y, and N2O was 275.0, 550.0, 687.6, 825.1 kg-N2O/y. In the case of high efficiency dry flue gas treatment, reduction of greenhouse gases by the change of temperature 120~160℃ and exhaust gas 5,000 ~ 6,500 ㎥/ton is possible with a minimum of 355,461 ton/y of CO2 and minimum 4,125 tons of CH4/y to a maximum of 6,325 ton/y and N2O to a minimum of 2,045 kg/y to a maximum of 3,135 kg/y.

This study was done to understand the G x E interaction of rice blast reaction for Japonica high quality rice varieties and to observe blast pattern for high quality varieties. Twenty one percent of the total sum of squares (SST) in blast reaction data of high quality Japonica varieties is attributed to genotype (G) by environment (E) interaction variation. This portion of blast response is higher than 8～12% of G x E effect in blast severity data obtained from various ecotypes of rice varieties. Blast response scores obtained from high quality Japonica varieties group were more severely affected by environment condition than mixed groups with Japonica and Indica varieties. Interaction Principal Component Analysis (IPCA) scores obtained from AMMI analysis for the leaf blast response implied variation of G x E interaction. Correlation analysis suggested that IPCA1 was associated with latitude, maximum mean temperature, precipitation and mean cloud amount. IPCA2 was associated with mean relative humidity, and IPCA3 was associated with precipitation and minimum relative humidity. Pattern analysis generated nine genotype clusters according to blast reaction over 11 regions. Collectively, the A, B, C, and D groups were susceptible to rice blast, where as the E, F, G, H, and I groups were relatively resistant to rice blast through multi-location blast nursery test. Relationship between the identified genes of high quality varieties and blast scores at each test site in the level of group could be analyzed based on the results from G x E Interaction analysis.

Bovine embryos produced by in vitro maturation, feretilization and development was examined for presevation and transfer. The fertilization medium used BO medium with 5 mM/ caffeine and 10/ heparin and adjusted to a pH of 7.2 to 7.4. The final concentration of spermatozoa was adjusted to 1 cells/ motile sperm during fertilization in vitro. At 8~10 hrs after insemination, the oocytes were transferred into CR1aa medium and cultured for 7 days. Embryos were preserved by vitrification method for transfer. When the embryos of early, blastocyst and expanded blastocyst stages were frozen-thawed, the proportions of embryos with normal morphology 83.6, 88.1 and 85.2%. (중략)

The purpose of this is to investigate the effects of vitrification in open pulled straws (OPS) on in vitro survival of porcine embryos. Blastocysts were produced by in vitro fertilization of slaughterhouse-derived, in vitro matured oocytes with frozen-thawed boar semen, and subsequent culture on granulosa cell monolayer. After frozen-thawing, embryos were culture in NCSU-23 medium with 5 mM hypotaurine, 4 mg/ BSA and 10 ng/ for 48 hrs to survival tests. When blastocysts were frozen-thawed by OPS methods, the embryos with normal morphology were 32.1, 34.5 and 38.9 % in early blastocyst, blastocyst and expanded blastocyat stages. The rates of partial damaged embryos were significantly (P<0.05) higher in early biastocysts than expanded blastocysts. In another experiment, the embryos frozen by OPS methods were cultured for 48 hrs for survival and developmental rates in vitro. The proportions of embryos hatched were 11.8, 20.2 and 33.3% in embryos frozen-thawed at stages of early blastocyst, blastocyst and expanded embryos. On the other hand, The proportions of embryo with normal morphology after culture were 23.5, 25.0 and 33.3% in embryos frozen-thawed at stages of early blastocyst, blastocyst and expanded embryos. These finding indicate the possible broader application for OPS methods that this procedure described is relatively harmless, that it can be used for blastocysts of different developmental stages.