검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 893

        162.
        2020.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Background: With the increasing elderly population, the need for gait analysis of these elderly individuals is also increasing. Most devices are costly and not portable; however, smartphones using built-in sensors capable of measuring motion and are easily available. Objectives: To examine the reliability and validity of knee joint angles of the elderly using smartphone measurements during walking. Design: Quasi-experimental research. Methods: Sixteen elderly people, aged 65+ and living in Daejeon and Chungbuk, South Korea, participated in the study. Electrogoniometers and smartphones were attached to the thigh and the side and front of the shank of each subject, respectively, using double-sided tape, an arm band, and an elastic band. Each subject completed two sets of at least seven gait cycles (14 steps). Results: Both the smartphones and electrogoniometers exhibited high agreement in terms of their primary and secondary measurements (ICC>.75). The agreement between the smartphones and electrogoniometers was also high in terms of both the primary and secondary measurements (ICC<.60). Conclusion: These results indicate that smartphones can be costly equipment cannot, even though they cannot completely replace existing clinical-grade devices. Their utility is emphasized herein for measuring knee joint angles of the elderly during walking.
        4,000원
        163.
        2020.09 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Cattle feeding in South Korea has been heavily dependent on domestically produced rice straw and imported grain. Around 42% of domestically produced rice straw is utilized for forage, and the remainder is recycled to restore soil fertility. Approximately 35% of round baleages were made with rice straw. However, higher quality hay is desired over rice straw. Due to increasing stockpiles of rice, there has been an economic burden on the government to store the surplus; therefore production of annual forage crops in rice fields has been further promoted in recent years. Hay import from the USA currently constitutes more than 80% of total imported hays. The main imported hays are alfalfa (Medicago sativa), timothy (Phleum pretense), and tall fescue (Festica arundinacea). The estimated forage required for cattle feeding was approximately 5.4 million MT in 2016. Domestically produced forage sates only 43% of that value, while low quality rice straw and imported hay covered the rest of demand by 33% and 20%, respectively. As utilization of domestically produced forage is more desirable for forage-based cattle production, long-term strategies have been necessary to promote domestic production of high quality baleage. One such strategy has been utilizing the fertile soil and abundance of fallow rice fields of western region of S. Korea to produce forage crops. Italian ryegrass (Lolium multiflorum) is the most successfully produced winter annual in the region and is approximately 56% of the total winter annual forage production. Forage sorghums (Sorghum bicolor), sorghum × sudangrass hybrids, and hybrid corn (Zea mays) produce a substantial amount of warm-season forage during summer. Produced forage has been largely stored through baleage due to heavy dew and frequent rains and has been evaluated according to S. Korea’s newly implemented baleage commodity evaluation system. The system weighs 50% of its total grading points on moisture content because of its importance in deliverable DM content and desirable baleage fermentation; this has proved to be an effective method. Although further improvement is required for the future of forage production in South Korea, the current government-led forage production in rice fields has been able to alleviate some of the country’s shortage for quality hay.
        4,000원
        165.
        2020.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The purpose of this study identify the types and characteristics of Hanbok worn in lunar new year parade and Korean parade in New York over the past three years. As for the research method, I first collected domestic news articles, overseas Korean news articles, and literature reviews about the history of the Korean parade in New York and the events of each year. Second, I conducted a case study on Hanbok worn in the six parades from 2017 to 2019 using photo data collected through direct surveys, ‘YouTube’ video footage and news article photos. Third, I interviewed people related to the New York parade about the route of buying and renting the Hanbok in the New York area. The types of Hanbok shown in the Korean parade in New York can be largely classified as ceremonial, performance, and daily costume. There were 65 ceremonial costumes in all, with men wearing Dallyeong (official’s robe) and Gorlyongpo (dragon robe) and women wearing Dangui (woman’s semi-formal jacket), Wonsam (woman’s ceremonial robe), and Hwarot (princess’s ceremonial robe). A number of performance costumes were also worn by the Chwitasu bands, Nongak ensembles and fan dancers. Finally, of the 210 daily Hanbok, most men wore Baji (pants) and Jeogori (jacket), and women wore Chima (skirts) and Jeogori. The parade attempts to showcase the beauty of Hanbok, but the costumes repeat year after year, which can feel monotonous to onlookers. This research can be used as a reference to effectively utilize Hanbok in future Korean cultural events.
        5,100원
        166.
        2020.08 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Observation data measured at Ieodo Ocean Research Station (IORS) have been utilized in oceanographic and atmospheric studies since 2003. Sea level data observed at the IORS have not been paid attention as compared with many other variables such as aerosol, radiation, turbulent flux, wind, wave, fog, temperature, and salinity. Total sea level rises at the IORS (5.6 mm yr−1 ) from both satellite and tide-gauge observations were higher than those in the northeast Asian marginal seas (5.4 mm yr−1 ) and the world (4.6 mm yr−1 ) from satellite observation from 2009 to 2018. The rates of thermosteric, halosteric, and steric sea level rises were 2.7-4.8, −0.7-2.6, 2.3-7.4 mm yr−1 from four different calculating methods using observations. The rising rate of the steric sea level was higher than that of the total sea level in the case with additional data quality control. Calculating the non-steric sea level was not found to yield meaningful results, despite the ability to calculate non-steric sea level by simply subtracting the steric sea level from total sea level. This uncertainty did not arise from the data analysis but from a lack of good data, even though tide, temperature, and salinity data were quality controlled two times by Korea Hydrographic and Oceanography Agency. The status of the IORS data suggests that the maintenance management of observation systems, equipment, and data quality control should be improved to facilitate data use from the IORS.
        5,700원
        167.
        2020.08 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        본 논문에서는 고리 1호기 해체 비용 추정을 위해 외국 원자력발전소 해체 비용 데이터를 현가화한 후 원자력발전소 해체 비용 추정 회귀 분석모델을 개발하였다. 이 모델 개발에 사용된 데이터는 해체 또는 진행 중인 BWR 13기, PWR 16기의 해체 비용 데이터이다. 회귀 분석모델 도출을 위해, 해체 비용을 종속변수로 정하고, 해체 원전의 운전 특성을 반영할 수 있게 고 안된 Contamination factor와 해체 기간을 독립변수로 선정하였다. 빅데이터 분석 도구인 R language의 통계패키지를 이용 하여 회귀 분석모델을 도출하였다. 이 회귀 분석 모델을 적용하여 고리 1호기 해체 비용을 예측한 결과, 미화 663.40~928.32 백만 달러, 한화 약 7,828.12억~1조 954.18억 원이 소요될 것으로 예측되었다.
        4,600원
        170.
        2020.03 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        Cu/PET composite films are widely used in a variety of wearable electronics. Lifetime of the electronics is determined by adhesion between the Cu film and the PET substrate. The formation of an anisotropic nanostructure on the PET surface by surface modification can enhance Cu/PET interfacial adhesion. The shape and size of the anisotropic nanostructures of the PET surface can be controlled by varying the surface modification conditions. In this work, the effect of Cu/PET interface nanostructures on the failure mechanism of a Cu/PET flexible composite film is studied. From observation of the morphologies of the anisotropic nanostructures on plasma-treated PET surfaces, and cross-sections and surfaces of the fractured specimens, the Cu/PET interface area and nanostructure width are analyzed and the failure mechanism of the Cu/PET film is investigated. It is found that the failure mechanism of the Cu/PET flexible composite film depends on the shape and size of the plasmatreated PET surface nanostructures. Cu/PET interface nanostructures with maximal peel strength exhibit multiple craze-crack propagation behavior, while smaller or larger interface nanostructures exhibit single-path craze-crack propagation behavior.
        4,000원
        171.
        2020.03 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구에서는 예비 마스터가드너를 선발, 정보를 전달하고 활동을 촉진시켜 프로그램 진행을 위한 실질적인 관리를 담당 하는 코디네이터 양성을 위해 데이컴 분석을 통하여 마스터가드너 코디네이터의 전문성 기준과 직무모형을 제시하였다. 1, 2차 데이컴 위원회를 통해 임무, 작업, 작업 요소를 도출하고 작업에 필요한 지식, 기술, 태도를 확정하였다. 도출된 임무 및 작업 등을 바탕으로 마스터가드너 교육을 담당하고 있는 시군 농업기술센터 농촌지도사를 대상으로 직무 수행평가를 시행하였다. 마스터가드너 코디네이터 직무분석 결과, <A. 정원문화 이해>, <B. 정원기술 이해>, <C. 봉사활동 이해>, <D. 교육과정 개발>, <E. 교육과정 운영>, <F. 교육사후 관리>, <G. 전문성 개발> 등 7개의 임무를 도출하였다. 또한 <A. 정원 문화 이해>의 4개, <B. 정원 기술 이해>의 4개, <C. 봉사 활동 이해>의 6개, <D. 교육과정 개발>의 6개, <E. 교육과정 운영>의 8개, <F. 교육 사후 관리>의 6개, <G. 전문성 개발> 의 7개 작업까지 총 41개의 작업과 173개의 작업 요소를 도출 하였다. 이를 토대로 작업과 지식, 기술, 태도의 관계를 분석 하고 매트릭스로 제작하여 마스터가드너 코디네이터 직무 활동에 사용하도록 하였다. 본 연구의 의의는 마스터가드너 코디네이터의 역할과 활동 범위를 설정을 위한 직무모형을 제안함으로써 향후 마스터가드너 코디네이터 직무교육 표준화 기준을 수립하고 일자리 영역을 구축하는 등 후속 연구를 촉진 할 수 있는 토대될 수 있을 것이라 사료된다.
        4,000원
        175.
        2019.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Smart healthcare clothing combines IoT, new technology, and clothing construction to perform specific care functions, and its utility has been expanding rapidly within aging and diversified societies. However, the related market remains at an early stage of development due to limited regulation, lack of consumer awareness, and the need for not only technical development but promotion plans for potential users. This paper aims to analyze factors influencing purchase intention for smart healthcare clothing with biosignal monitoring, including variables in the Technology Acceptance Model (TAM), clothing attributes, health-related lifestyle factors, and fashion innovativeness. A survey was conducted on a sample of 300 males and 300 females ranging in age from 20 to 50 years, and data were analyzed using SPSS 21.0. The results show that perceived usefulness, perceived aesthetic attributes, health responsibility, and fashion innovativeness were overall significant predictors of using smart healthcare clothing. Additionally, perceived ease of use and physical activity in the male subsample, and perceived compatibility within the female group, also had significant effects. Furthermore, age was a determining factor; for subjects in the 30s age group, perceived usefulness, compatibility, and health responsibility had significant positive associations. The results of this study can provide basic guidelines for designing merchandising plans to expand user acceptance of smart healthcare clothing.
        5,100원
        176.
        2019.12 구독 인증기관 무료, 개인회원 유료
        The CC chemokine receptor 5 (CCR5) is a G protein-coupled receptor that regulates chemotaxis and effector functions of immune cells. It also serves as the major co-receptor for the entry of human immunodeficiency virus (HIV). Recently, CCR5 inhibitors have been developed and used for the treatment or prevention of HIV infections. Additionally, it has been identified that CCR5 controls bone homeostasis by regulating osteoclastogenesis and the communication between osteoblasts and osteoclasts. However, the effects of CCR5 inhibition on bone tissue in elderly patients are unknown. This study aimed to examine the bone phenotype of aged CCR5 knockout (KO) mice. Femoral and tibial bones were isolated from 12-month and 18-month old wild-type (WT) and CCR5 KO mice, and microcomputed tomography and histology analyses were performed. Twelve-month-old CCR5 KO mice exhibited a decreased trabecular bone mass and cortical bone thickness in both femoral and tibial bones compared with agematched WT mice. Eighteen-month-old mice also showed a decreased trabecular bone mass in femurs compared with control WT mice, but not in tibial bones. Unlike in 12-month-old mice, the cortical margin of femurs and tibias in 18-month-old mice were rough, likely because they were aggravated by the deficiency of CCR5. Overall, our data suggest that the deficiency of CCR5 with aging can cause severe bone loss. When CCR5 inhibitors or CCR5 inactivating technologies are used in elderly patients, a preventive strategy for bone loss should be considered.
        4,000원
        177.
        2019.12 구독 인증기관 무료, 개인회원 유료
        At present, ECDIS has been widely used in ship positioning, collision avoidance and navigation, and has developed into an important part of integrated navigation and automation system. However, most ECDIS software focuses too much on system function and technical level when realizing powerful navigation AIDS, neglecting the problems that the crew are most concerned about, such as realizing the human-computer interface operation quickly and simply as well as obtaining the information of human-computer interaction effectively and accurately. In order to improve the design of Electronic Chart Display and Information system(ECDIS)human-computer interface and its usability effectively, a new method for evaluating ECDIS human-computer interface is proposed. Starting from the concept and connotation of usability, five-factor personality model is used to measure the users’ personality type in reference to the essence of usability (user’s emotional experience) and calculate the basic emotional variant of users. Then, according to the users’ emotional stimulation after finishing the given ECDIS task and combining with the system Usability scale (SUS), a tool dedicated to usability testing and five dimensions of usability evaluation proposed by Jakob Nielsen, father of usability, the emotion relationship model of usability and users is established by using partial least square method ( PLS ), and the validity of the model is verified with an aim to locate the key indicators that affect the usability of the ECDIS human-computer interface, It will be more helpful to improve the usability of ECDIS human-computer interface.
        4,300원
        178.
        2019.11 KCI 등재 구독 인증기관 무료, 개인회원 유료
        커티스 L. 카터는 저명한 현대 미학가로 분석 미학, 아시아 미학 그리고 동서양 문화 간의 대화 를 주로 연구한다. 2010년부터 2013년까지 국제 미학회 회장을 역임하였다. 세르비아 베오그라드에서 열린 제 21차 세계미학자대회 (ICA)에서 ‘커티스 카터와 현대 미학’을 주제로 하는 원탁 회의가 있었다. 카터 박사는 본 인터뷰에서 먼저 이 회의를 주로 소개한다. 다음으로 그는 분석 미학에 관한 몇 가지 중요한 질문을 논하는데 특히 아더 C. 단토(Arthur C. Danto)와 노엘 캐롤 (Noel Carroll)을 다룬다. 그는 미학가는 단순히 예술의 언어뿐만 아니라 예술이 인간 경험의 기본적인 부분으로써 하는 역할에도 관심을 두어야 한다고 주장한다. 커티스 카터는 미학의 주제에 대해 열린 태도를 보인다. 그는 아시아 문화에서 진화해 온 예술의 형태를 예술적으로 이해 하고 세계화된 관점으로 향해 나아가는 것이 중요하다고 말한다.
        6,300원
        179.
        2019.11 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Background: Shoulder function is achieved by the coordinated movements of the scapula, humerus, and thoracic spine, and shoulder disorders can be associated with altered scapular kinematics. The trunk plays an important role as the kinematic chain during arm elevation. Objects: The purpose of this study was to determine the effects of thoracic hyperkyphosis on scapular orientation and trunk motion. Methods: Thirty-one subjects (15 in the ideal thorax group and 16 in the thoracic hyperkyphosis group) performed right-arm abduction and adduction movements in an unconstrained plane. The scapular orientation and trunk motion were recorded using a motion analysis system. Results: Those subjects with thoracic hyperkyphosis displayed greater scapular posterior tilting at a 120˚ shoulder elevation, greater scapular internal rotation throughout the arm raising phase, and greater trunk axial rotation at the upper ranges of the shoulder elevation, compared to those subjects with an ideal thorax (p<.05). Conclusion: Thoracic hyperkyphosis can cause scapular instability, greater trunk rotation and greater scapular posterior tilting, and may contribute to preventing the achievement of a full range of humeral abductions in an unconstrained plane.
        4,000원
        180.
        2019.10 KCI 등재 구독 인증기관 무료, 개인회원 유료
        The properties of powder metallurgy products are related to their densities. In the present work, we demonstrate a method to apply artificial neural networks (ANNs) trained on experimental data to predict the bulk density of barium titanates. The density is modeled as a function of pressure, press rate, heating rate, sintering temperature, and soaking time using the ANN method. The model predictions with the training and testing data result in a high coefficient of correlation (R2 = 0.95 and Pearson’s r = 0.97) and low average error. Moreover, a graphical user interface for the model is developed on the basis of the transformed weights of the optimally trained model. It facilitates the prediction of an infinite combination of process parameters with reasonable accuracy. Sensitivity analysis performed on the ANN model aids the identification of the impact of process parameters on the density of barium titanates.
        4,000원