The use of hanging scaffolding for exterior wall painting and cleaning in building construction and maintenance carries the inherent risk of fall accidents. While periodic rope replacement is crucial for preventing accidents resulting from rope breakage, current regulations lack specificity in determining appropriate disposal period for fiber ropes. This study analyzed the tensile strength of the most commonly used PP fiber ropes with different diameters (16 mm, 20 mm) in the domestic construction industry. Additionally, the effect of outdoor exposure was examined by measuring the tensile strength of new ropes and ropes exposing to outdoor conditions for 30 days and 90 days. The results showed that the new ropes and those exposed to outdoor for 30 days met the KS (Korean Standards) criteria for tensile strength. However, a significant decrease in tensile strength was observed in ropes exposed to outdoor for 90 days compared to both the new ropes and those exposed for 30 days. Furthermore, the ropes exposed for 90 days did not meet the KS criteria. These findings indicate the degradation of PP fiber ropes due to UV (Ultra Violet) radiation, highlighting the importance of considering this factor when determining the replacement period for fiber ropes used in scaffolding work.

Occupational safety and health management expenses in the construction industry are statutory and separately included in the cost statement to prevent occupational accidents and health problems. The expenses are determined by multiplying the standard amount by the rate decided according to construction types and scales. However, the current expense appropriation method does not properly reflect the recent changes in the construction industry such as industry size, industry diversification, and social atmosphere about safety reinforcement. This study surveyed 1579 questionnaires in total and analyzed expense execution rate and proportion of each expense category. The expense execution rate was relative higher in complex construction (e.g., heavy construction = 126%, civil engineering = 125%) and long-period project (equal to or over 48 months construction = 133%) compared to general construction (98~116%) and short-period project (less than 48 months construction = 115%). The proportion of spending expenses was higher in the category of safety manager labor costs (25~52%), safety facility costs (22~40%), and personal protective equipment costs (10~25%). The analysis results of the study can be utilized in revising the standard expense appropriation method by reflecting the current usages of the occupational safety and health management expenses in the construction industry.

본 연구는 SNS의 특성과 조직문화가 군사기와 커뮤니케이션에 어떠한 영향을 미치는지 알아보고 한/미의 그룹간의 차이을 알아보고자 하는 논문이다 1) 과학적 검증을 위해 본 연구에서는 165 명의 군언을 대상으로 하여 설문을 수집 및 분석하였다. 분석방 법은 각 변수들간의 관계를 알아보고자 구조방정식을 사용하였다. 이를 위해 연구 데이터를 Smart PLS 2.0을 이용하여 판별타당성，확인적 요인분석，신뢰도와 모형의 적합도，경로분석을 실시하였다. 이를 통해 연구 가설의 유의성을 검증하였다. 본 연구의 결과는 전체적으로는 매체풍부성 사회적규범 위계적 문화 집단문화가 커뮤니케이션 만족에 협별 미치는 것으로 나타났고 한/미간에 만족을 시키는 원인의 차이가 나타났다. 본 연구를 통해 조직커뮤니케이션의 원인과 그룹간의 차이를 알아본 것이 기여점이라고 하겠다.

강진만의 생태계의 변화를 조사하기 위해 1998년 2월부터 11월까지 계절별로 주요인 분석을 수행하였다. 이러한 목적을 위해 영양염류, 수온, 염분도, COD, DO, 종속영양세균, 균류 그리고 분변성 대장균 등의 항목들이 6개의 정점에서 조사되었다. 이들 항목을 상관분석과 주요인분석 등의 통계처리를 한 결과 강진만의 생태계는 계절에 따라 2∼4개의 요인에 의하여 영향을 받고 있는 것으로 조사되었다. 그 중에서 특히 담수유입에 따른 영양염류, 부유물질,

Quality control of Argo(Array for Real-time Geostrophic Oceanography) data is crucial by reason that salinity measurements are liable to experience some drift and offset due to biofouling, contamination of sensor and wash-out of biocide. The automated Argo real-time quality control has a limit of sorting data quality, so that WJO program is adopted as standardized method of Argo delayed mode quality control (DMQC) in the world that is a precise quality control method. We conducted DMQC on pressure, temperature and salinity measured by Argo floats in the Pacific Ocean including expert evaluation. Particularly, salinity data were corrected using WJO program. 4 salinity profiles of Argo delayed mode were compared with nearby in situ CTD data and other Argo data in deep layer where oceanographic conditions are stable in time and space. The differences of both salinities were lower than target accuracy of Argo. As compared with the difference of salinities before DMQC, those after DMQC decreased by 60-80 percent. Quality of delayed mode salinity data seemed to be improved correcting salinity data suggested by WJO program.