PURPOSES : This study attempts to design and establish the road surface condition detection system by using the image processing that is expected to help implement the low-cost and high-efficiency road information detection system by examining technology trends in the field of road surface condition information detection and related case studies. METHODS : Adapted visual information collecting method(setting a stereo camera outside of the vehicle) and visual information algorithm(transform a Wavelet Transform, using the K-means clustering) Experiments and Analysis on Real-road, just as four states(Dry, Wet, Snow, Ice). RESULTS : Test results showed that detection rate of 95% or more was found under the wet road surface, and the detection rate of 85% or more in snowy road surface. However, the low detection rate of 30% was found under the icy road surface. CONCLUSIONS : As a method to improve the detection rate of the mobile road surface condition information detection system developed in this study, more accurate phase analysis in the image processing process was needed. If periodic synchronization through automatic settings of the camera according to weather or ambient light was not made at the time of image acquisition, a significant change in the values of polarization coefficients occurs.

최근 자전거이용에 대한 관심이 증가하면서, 전국적으로 자전거도로 확충을 계획하고 자전거 이용 활성화를 위해 많은 노력이 이루어지고 있으나 대부분의 계획들은 도시부와 레저형 자전거도로에 치우쳐 있다. 따라서 본 연구에서는 지방부의 생활형 자전거도로 사업의 효율적인 투자를 위한 우선순위를 결정할 수 있는 평가기법을 개발하고자 한다. 먼저 평가지표 개발을 위해 지방부 생활형 자전거도로의 특성을 반영하고 정량화가 가능하여 객관적으로 평가할 수 있는 지표를 선정하였으며, 평가지표의 가중치를 산출하기 위하여 계층화분석법을 사용하였다. 또한, 평가항목의 결과만을 기준으로 사업의 우선순위를 평가할 경우 대도시 중심으로 우선순위가 분포되는 경우가 발생할 것으로 판단되어 지역적 형평성(지역균형발전효과)을 고려하기 위해 지역낙후도지수를 고려하였다. 지방부 생활형 자전거도로의 우선순위를 선정하기 위해 시범 적용된 일반국도 구간은 총 23개 구간 160km의 연장으로 구성되어 있다. 본 연구에서 제시된 지방부 생활형 자전거도로 우선순위 평가방법은 지금까지 없었던 생활형 자전거도로에 대한 구체적인 판단기준을 제시하고 정책적 의사결정에 도움을 줄 것으로 기대된다.

We have identified the subway of structures as subway station users complained of vibrations from a structures when they walked through middle stairs of escalator. As a result of converting the vibration level to the conversion rate, it was measured at 3.846mm/s(82.7dB) on the B1st floor and 0.966mm/s(70.7dB) on the B2nd floor. These results are higher than the domestic standard of 65dB and lower than the international standard of under 5mm/s. It is felt well with the human body, but the structure is considered to be harmless. Therefore, it is deemded the structure is safe to usue. As the result of measuring the national frequency, the stairs on the B1st floor to be 3.01Hz and the stairs B2nd floor to be 5.36Hz. We consider that the users feel discomfort and anxiety on the B1st floor, where displacement and vibrations are higher.

There is also a reverse cavity in the back of the domestic subway and railways and roads, which cause a rift in tunnel structures due to stress concentration and strain. As a result, the balsaeng of the tunnel on the back of the tunnel was interpreted as a method to determine the method of a structural structure which greatly affects the stability of the tunnel structure.

There is also a reverse cavity in the back of the domestic subway and railways and roads, which cause a rift in tunnel structures due to stress concentration and strain. As a result, the balsaeng of the tunnel on the back of the tunnel was interpreted as a method to determine the method of a structural structure which greatly affects the stability of the tunnel structure.

In this study, the method of estimating impact coefficient is studied by dynamic load test using the results of inspection for railway bridge that have few errors that may occur in case of running of trains because trains move on the railway bridge.

In general, the lateral resistant of bearing in a straight bridge is designed for lateral load such as wind or seismic forces. In this study, however, it is found that the cause of damage of bearings in a straight bridge adjacent to the curved road is the centrifugal force or the breaking force of the vehicle. Also, it is suggested that the repair method for the damaged bearings.

In general, the lateral resistant of bearing in a straight bridge is designed for lateral load such as wind or seismic forces. In this study, however, it is found that the cause of damage of bearings in a straight bridge adjacent to the curved road is the centrifugal force or the breaking force of the vehicle. Also, it is suggested that the repair method for the damaged bearings.

Numerical Analysis of corrugated-metal culvert is mainly related with corrugated shape, plate thickness, and load transmission mechanism, and these elements especially should be treated consistently in the analysis of 3-Dimensional analysis of behavior of skewed corrugated-metal culvert. And so, the modelling technic, 3-dimensional equivalent plate modelling, is required to be modified.