In this study, changes in the microstructure and mechanical properties of cast and extruded Al-2Li-1Ce alloy materials were investigated as the Mg content was varied. The density decreased to 2.485, 2.46 and 2.435 g/cm3 when the Mg content in the Al-2Li-1Ce alloy was increased to 2, 4 and 6 wt%, respectively. Intermetallic compounds of Al11Ce3 were observed in all alloys, while the β-phase of Al3Mg2 was observed in alloys containing 6 wt% of Mg. In the extruded material, with increasing Mg content the average grain size decreased to 84.8, 71.6 and 36.2 μm, and the fraction of high-angle grain boundaries (greater than 15°) increased to 82.8 %, 88.6 %, and 91.8 %, respectively. This occurred because the increased Mg content promotes dynamic recrystallization during hot extrusion. Tensile test results showed that as the Mg content increased, both the yield strength and tensile strength increased. The yield strength reached 86.1, 107.3, and 186.4 MPa, and the tensile strength reached 215.2, 285, and 360.5 MPa, respectively. However, it is worth noting that the ductility decreased to 27.78 %, 25.65 %, and 20.72 % as the Mg content increased. This reduction in ductility is attributed to the strengthening effect resulting from the increased amount of dissolved Mg, and grain refinement due to dynamic recrystallization.

This research investigated how adding Sb (0.75, 1.0, 2.0 and 5.0 wt%) to as-extruded aluminum alloys affected their microstructure, mechanical properties, electric and thermal conductivity. The addition of Sb resulted in the formation of AlSb intermetallic compounds. It was observed that intermetallic compounds in the alloys were distributed homogenously in the Al matrix. As the content of Sb increased, the area fraction of intermetallic compounds increased. It can be clearly seen that the intermetallic compounds were crushed into fine particles and homogenously arrayed during the extrusion process. As the Sb content increased, the average grain size decreased remarkably from 282.6 μm (0.75 wt%) to 109.2 μm (5.0 wt%) due to dynamic recrystallization by the dispersed intermetallic compounds in the aluminum matrix during the hot extrusion. As the Sb content increased from 0.75 to 2.0 wt%, the electrical conductivity decreased from 61.0 to 59.8 % of the International Annealed Copper Standard. Also, as the Sb content increased from 0.75 to 2.0 wt%, the ultimate tensile strength did not significantly change, from 67.3 to 67.8 MPa.

본 연구에서는 방사성동위원소 추적자 실험을 통해서 산화아연 또는 두 종류의 은나노물질로 오염시킨 토양에서 지렁이 (Eisenia fetida)의 금속축적과 제거율을 비교하였고, 이들을 이온상의 Ag와 Zn으로 처리한 대조구와 비교하였다. 추가적으로 토양의 금속을 다단계추출법 (sequential extraction method)을 이용하여 금속의 결합 형태로부터 생물이용도 (bioavailability)를 예측하고 실제 생물축적 (BAF, bioaccumulation factor)과 비교하였다. ZnO 처리구의 BAF (0.06)는 아연이온 처리구 BAF (1.86)보다 31배 낮았는데, 이는 토양에서 ZnO의 생물전이가 매우 낮음을 제시해 준다. 한편, 은의 BAF는 금속의 오염 형태에에 무관 하게 0.11~0.17의 범위를 보였다. 다단계추출법을 통해서 아연이온 처리구의 아연은 토양에 비교적 약한 결합을 하 는 형태 (mobile fraction)에 35% 분포하여 아연이온처리구 값 (<20%)보다 높았고, 이는 전자의 더 높은 BAF와 일치 한다. 하지만, ZnO 처리구의 다단계추출은 생물이용도나 BAF를 잘 예측하지 못했으며 이는 ZnO가 토양에서 아연 이온과 지화학적으로 다른 거동을 하기 때문으로 추정된다. 지렁이 체내에 축적된 은의 제거율 (3.2~3.8% d-1)은 아연의 제거율 (1.2~1.7% d-1)보다 2~3배 더 높았다

The topic of indoor air quality has attracted great interest since urban dwellers spend over 90% of their time indoors, such as public facilities, public transport and homes. In this study, the changes and current status of indoor air quality management and improvement policies for public facilities in Korea were discussed. Furthermore, we investigated the concentration and contamination status of indoor air pollutants based on the indoor air quality guidance and inspection report from 2007-2017 published by the Ministry of Environment, Korea. As a result, we found that while the PM10 concentration in public facilities decreased consistently, there was no clear change in the CO2 concentration. The HCHO concentrations were high in museums, art galleries, and postpartum centers, etc. The child care centers showed a high concentration of TCB. In conclusion, we suggested that it is necessary to focus on target substances according to the type of facility to manage indoor air quality efficiently. Intensive management and monitoring are particularly needed in child care centers to improve the indoor air quality.

Recently a high-rise building is built in many places. However some problems are occurred in the high-rise buildings. Especially, at the case of the kitchen exhaust using vertical shaft, the kitchen exhaust fan sometimes can not work normally because of unbalance of pressure inside the shaft. In this study, under the assumption that the kitchen exhaust system applied uniformly can not cope with the various changes of the outside environment, the vertical sectional characteristics of a kitchen exhaust using vertial shaft is analyzed. Outside temperature, number of the floors and operating ratio of the vertically connected fan are selected as major parameter. And it is analyzed by a network simulation method. In case of 60 stories building, the standard deviations are 115.6 at the second floor, 74.9 at the 30th floor and 20.7 at the 60th floor. The standard deviation at the lower part is about 5.5 times than the upper part. So the results of the simulation show that the kitchen exhaust system should be installed considering the vertical sectional exhaust characteristics.

Railroad line capacity is influenced by Quantitative and Qualitative factors which is applied by parameter to calculate it. But these parameters have been used experiential value without analyzing its reasonability or appropriate level. In this paper, we introduce the concept of robustness to Quantify parameter and evaluate robustness of it. For this purpose, we develop parameter evaluation simulator and present it. If this simulator is utilized, we can find the parameter having appropriate robustness and it will be applied to calculate more reasonable and systematic railroad line capacity.

Ag와 Cu로 오염된 퇴적물이 이매패류 Macoma balthica에 미치는 만성독성영향과 주요한 중금속 흡수경로를 평가하기 위해, 실험실에서 미소생태계 실험이 수행되었다. 실험생물인 M. balthica는 4개의 농도구배를 갖는 Ag(0.01-0.87μmol g-1)와 Cu(0.75-5.55μmol g-1)로 오염된 퇴적물에서 90일 동안 배양되었다. 퇴적물 내 중금속의 지화학적 분포 특성과 생물이용도를 조절한다고 알