Damages of large embankment dams by recent strong earthquakes in the world highlight the importance of seismic security of dams. Some of recent dam construction projects for water storage and hydropower are located in highly seismic zone, hence the seismic performance evaluation is an important issue. While state-of-the-art numerical analysis technology is generally utilized in practice for seismic performance evaluation of large dams, physical modeling is also carried out where new construction technology is involved or numerical analysis technology cannot simulate the behavior appropriately. Geotechnical centrifuge modeling is widely adopted in earthquake engineering to simulate the seismic behavior of large earth structures, but sometimes it can’t be applied for large embankment dams due to various limitations. This study proposes a dynamic centrifuge testing method for large embankment dams and evaluated its applicability. Scaling relations for a case which model scale and g-level are different could be derived considering the stress conditions and predominant period of the structure, which is equivalent to previously suggested scaling relations. The scaling principles and testing method could be verified by modified modeling of models using a model at different acceleration levels. Finally, its applicability was examined by centrifuge tests for an embankment dam in Korea.

일반적으로 콘크리트댐은 비파괴 검사를 실시한 물성값을 이용하여 정적 및 동적 안전성 평가를 실시한다. 그러나 이런 값을 이용하여 수치해석을 할 경우 경험적인 물성값을 적용하기 때문에 안전성 평가에 대한 결과는 현실적 요소를 반영하기 어렵다. 또한 댐은 품질관리가 중요한 요소 중 하나이지만, 과거 건설된 몇몇 댐에 대해서 축조시기, 타설시기가 달라 재료적 특성에 따른 안전성 문제가 대두되어 관심이 되었다. 따라서, 본 연구에서는 오랜기간 동안 건설중단 된 후 완공된 콘크리트댐의 내부상태를 조사하고(BIPS), 시추코아에 대한 물리특성 실험을 실시하여 물성값 차이로 인해 발생되는 동적특성 결과를 비교분석하였다.

국내 콘크리트댐의 경우 내진설계는 관성력을 고려한 진도법을 적용하여 설계를 하고 있으나, 보수적인 설계 방법으로 동적특성을 반영하지 못하는 단점이 있어, 동적특성을 고려한 댐 내진설계가 필요하다. 또한 콘크리트댐 내진성능평가는 동적해석으로 평가해야 하지만, 국내의 경우 대부분 진도법으로 평가를 하고 있어 현행 기준을 적용하기에는 어려운 점이 있다. 이에 본 연구에서는 진도법, 수정진도법, 동적해석 방법을 수행하여 내진설계 및 내진성능평가 결과에 대해서 비교 분석하였다.

The stability of the river in the restored river is an important issue in maintenance and management. Bed elevation change simulation can be an effective way to predict the direction of river restoration by predicting long and short term bed elevation change of river. A 2D numerical model (CCHE2D) was implemented to simulate the long-term bed elevation change. The study area is located in the Cheongmi-Cheon Notap-ri and 1.2 km long. The flow scenario was constructed using the flow data that was measured at the water level observatory located upstream at the Janghowon Bridge. The bed elevation change pattern according to restoration of abandoned channel was analyzed and the stability of river was evaluated.

This paper applied the concept of risk to prevent disasters in reservoirs and to manage them efficiently. However, there is a lack of information on safety management for small reservoirs managed by local governments. Therefore, considering such a reality, the geotechnical failure mode scenarios have been reduced to five types. In this study, the site investigation was carried out and the geotechnical failure probabilities were calculated based on the results, and then its applicability has been suggested.

In this study, to develop a risk assessment tool for geotechnical risk evaluation of local reservoirs. Generally, local reservoirs had some problems which is ageing, poorly compaction, differential settlement, leakage of adjacent conduit, material problem of adjacent spillway etc. Therefore, this study to develop geotechnical failure mode scenario for local reservoirs, and risk assessment tool considering internal erosion process. In addition, to carried out risk evaluation for pilot reservoirs and analyzed failure probability.

Recently, risk analysis of the fill dam has been many studies. The geotechnical characteristics are an important part of the risk analysis, and has a variety of causes failures. Geotechnical characteristics of fill dam is divided into structural and physical characteristics. In domestic, failure mechanism for risk analysis may consider six types.

소규모 대댐과 저수지 시설물은 일상점검, 정기점검 등을 실시하도록 규정하고 있으나 시설물이 안정성을 파악하기 위한 점검 항목, 항목별 평가 방법이 정립되어 있지 못한 상태이다. 또한 관리 전문 인력의 부족, 점검 시 제도적 평가 기준의 미비 등으로 체계적인 유지관리가 이루어지지 못한 실정으로 규모가 큰 댐에 비해 저수지의 파괴 가능성이 높다고 할 수 있다. 실제 소규모 댐과 저수지는 규모가 큰 댐과 정밀안전진단 세부지침이 상이하여 기존의 평가기준을 적용하기엔 무리가 있으며, 소규모 댐과 저수지에 최적화된 안정성 평가 기법의 개발이 요구되고 있는 실정이다. 이에 본 연구에서는 국내외 저수지 위험도 해석방안 조사 및 평가, 소규모 저수지 위험도 평가 및 DB 구축방안 수립, 수리수문학적/지반공학적/구조적 위험도 평가방안 마련, 저수지 붕괴로 인한 피해액 산정방법 검토에 대한 연구 방안을 수립하고자 한다. 최종적으로 저수지 위험도 평가 방안이 종합적으로 검토된 위험도 기반 저수지의 안전성 평가방안 수립하고 이를 활용한 저수지 재개발 우선순위 결정 모델을 개발하고자 한다.

수문학적 댐 위험도 분석은 복잡한 수문분석과 연계되어 있으며, 기본적으로 수문분석 과정과 모형에 사용되는 입력 자료에 대한 불확실성을 평가하는 과정이 필요하다. 그러나 체계적인 불확실성 분석 과정을 통한 댐 위험도 분석 절차에 대한 연구는 상대적으로 적은편이다. 이러한 점에서 본 연구에서는 기존 연구에 대해서 2가지 주요 개선점을 도출하여 댐 위험도 분석에 활용하였다. 첫째, 강우 분석 시 매개변수의 불확실성 분석이 가능한 Bayesian 모형 기반의 지역빈도해석 절차를 수립하였다. 둘째, 강우-유출 모형 매개변수의 사후분포를 정량적으로 추정하기 위하여 Bayesian 모형과 연계한 HEC-1모형을 도입하였다. 도출된 유입 시나리오를 댐의 수위로 환산하기 위하여 기존 저수지 운영기준에 근거하여 저수지 추적을 수행하였으며, 최종적으로 실행함수를 통하여 수문학적 위험도를 추정하였다. 실제 댐에 대해서 모형의 적합성을 평가하였으며, 초기수위 가정에 따른 수문학적 위험도에 민감도를 평가하였다.

In this year, dam risk analysis and assessment tool is developed D-SMART program, including analysis hydrological module, geotechnical module and consequence module. D-SMART is program of risk analysis and assessment utilize technique for dam safety evaluation. In the future, Dam risk assessment carried out step by step in K-water plans.

In this study, risk analysis and assessment was carried out by selecting pilot dams using D-SMART. D-SMART was risk-based evaluation tool of dam for dam safety and was developed in K-water. Dam risk assessment conducted for the first time using D-SMART and the future through additional research, system of risk assessment will be improve.

본 연구에서는 지역특성(위도, 경도, 고도)과 기후학적 특성(연최대강우량)을 계층적 Bayesian 모형안에서 연계하여 공간적 분석이 가능한 지역빈도해석 모형을 개발하였다. 기존 지역빈도해석은 강수지점의 지리적/지형적 특성을 반영한 해석이 어려운 단점이 있으며, 지점을 기준으로 해석된 확률강수량을 유역면적강우량으로 변환 시 불확실성이 큰 단점이 있다. 이에 본 연구에서는 계층적 Bayesian 기법을 이용하여 지역특성 및 기후학적 특성이 고려된 Gumbel 확률분포형의 매개변수를 추정하였으며, 이들 매개변수들을 공간적으로 보간하여 한강유역내 모든 지점에 대해서 확률강수량을 추정할 수 있도록 하였다. 결과적으로 기존 L-모멘트 방법과 유사한 결과를 확인할 수 있었으며 확률강수량의 불확실성 정량화와 더불어 지리적/지형적 영향을 고려한 해석이 가능하였다.

The first time in Korea risk analysis was carried out on dams and risk assessment was carried out by selecting a pilot dam. As a result, the dam risk assessment process was established, and also learned the importance of risk assessment. Dam risk assessment conducted for the first time, but the future through additional research, risk analysis is to develop the system.

In this study, dynamic centrifuge tests on the dam interface model, which was prepared for an existing composite dam, were carried out. From the analysis of the accelerations measured at the dam base and at the crest of the concrete, the joint, and the rockfill model around the interface, the acceleration amplification characteristics of the interface was examined.

In this study is to develop hydrological and geotechnical analysis module and risk analysis and assessment tool for the development of the dam safety management decision-making support tool D-SMART. Analysis module is composed of two parts. One is the initial load probability result part to the hydrological and an earthquake characteristic, the other is system response probability result part.

The purpose of in this study to develop of the dam safety management assessment tool based risk assessment for the dam safety management paradigm shift. Therefore in this study is to develop hydrological and geotechnical analysis module and risk analysis and assessment tool for the development of the damsafety management decision-making support tool D-SMART.

In this paper, to investigate the microstructural characteristics of MgO concrete according to cement manufactures, it was carried out XRD, SEM, DSC and Autoclave test. For two types of cement, the micro structural characteristics were observed by test variation of curing temperature and MgO mixing ratio until age 1 year. DSC was conducted with curing temperature of 20, 30, 40℃ and MgO mixing ratio of 0% and 5%. XRD and SEM were conducted with curing temperature of 20, 40℃ and MgO mixing ratio of 0% and 10%. Autoclave test was conducted with MgO mixing ratio of 0%, 3% and 5%.

This study seeks to characterize the dynamic behaviour of each section and to understand the performance of the interface using centrifuge model test and numerical analyses. The model test was verified by the comparison of the test results with those of numerical analyses, and the natural frequency for the composite dam with concrete-rockfill was proposed as like the same centrifuge model test and numerical analyses.

Dam risk analysis and assessment, with the state-of the-art technology in developed countries being used. This technology is considered to require a paradigm shift in the national dam safety management. Therefore, this study is developed to utilized the risk-based dam safety management assessment tool.

The key findings of the paper are as follows: Numerical parameters study of the interface-element was carried out, the friction angle depends on rockfill zone material and normal and shear stiffness coefficient of the two materials (concrete and rockfill), the average values were found to be the most appropriate.