한반도 남서해안에 위치한 흑산도 고층관측이 2003년 6월 1일부터 실시되고 있다. 이러한 흑산도 관측자료에 의한 수치예보개선효과를 보기 위하여 광주의 관측자료와 비교 분석하였다. 분석에는 MM5를 기본으로 제작한 호남지방 고밀도 예측시스템을 이용하였다. 먼저 지표면 마찰과 현열플러스의 차이에 의하여 광주와 흑산도의 바람장과 온도장은 다르게 나타났으며, 광주와 흑산도의 자료를 모두 동화시킨 수치예측 바람장과 기상장이 관측과 제일 잘 일치하였다. 강수면에서 비록 강수량은 과소평가를 하고 있으나, 강수시간과 강수구역은 흑산도자료를 포함하여 자료동화를 시킨 경우 관측과 유사하게 나타났다.

얼음골 주변의 지표면 변화에 따른 중규모 대기순환장에 미치는 효과를 보기위하여 수치실험을 실시하였다. 얼음골 남북 경사면에서 발생하는 순환장은 지형과 단파복사에 의한 영향으로 다르게 나타나며, 비대칭을 이룬다. 그리고 이러한 비대칭은 18시까지 계속된다. 야간의 경우, 도로건설에 따른 대기순환장의 차이는 크지 않다. 이것은 주간 단파 복사에 의한 현열플럭스가 감소하며, 현열플럭스외의 다른 요소는 크게 영향을 미치지 않는다는 것을 의미한다. 도로의 건설은 현열플러스의 증가와 관련되고, 주간의 경우, 지형에 의한 곡풍과 결합하여 도로가 없는 경우에 비하여 상승류가 강하여진다. 최대풍속은 4.67 m/s이다. 그리고 이때 도로의 위치역시 주요한 요인으로 작용한다.

포항일대의 대기환경을 이해하고 예측의 기초정보로 활용하기 위해 기후학적 요소들에 대한 조사를 수행하였다. 분석을 통해, 포항지역의 연평균 기온, 상대습도, 강수량은 각각 14.39˚C, 63.3%, 1,178mm로 나타났다. 포항지역에서의 연간 탁월풍은 남서풍으로 나타났으며 평균풍속은 2.7m/s였다. 운량은 장마기간이 포함되며 지형효과에 의한 대류운이 활발하게 나타나는 여름에 많았다. 또한 연평균 일조시간은 약 2,221시간으로 나타났다.

To investigate the reason for the spatial difference in PM2.5 (Particulate Matter, < 2.5 ㎛) concentration despite a similar synoptic pattern, a synoptic analysis was performed. The data used for this study were the daily average PM2.5 concentration and meteorological data observed from 2016 to 2020 in Busan and Seoul metropolitan areas. Synoptic pressure patterns associated with high PM2.5 concentration episodes (greater than 35 ㎍/㎥) were analyzed using K-means cluster analysis, based on the 900 hPa geopotential height of NCEP (National Centers for Environmental Prediction) FNL (Final analysis) data. The analysis identified three sub-groups related to high concentrations occurring only in Busan and Seoul metropolitan areas. Although the synoptic patterns of high PM2.5 concentration episodes that occur independently in Busan and Seoul metropolitan areas were similar, there was a difference in the intensity of pressure gradient and its direction, which tends to be an important factor determining the movement time of pollutants. The spatial difference in PM2.5 concentration in the Korean Peninsula is due to the difference and direction of the atmospheric pressure gradient that develops from southwest to northeast direction.

Fog can have severe impacts on human life (e.g., accidents in transportation systems) because it causes low visibility. Areas prone to fog near the sea or a river require accurate fog forecasts. In this study, we analyzed the characteristics of fog occurrence around Gumi Reservoir, a part of the inland Nakdong River. We also simulated and predicted visibility using the Weather Research and Forecasting (WRF) model. Visibility was estimated using several point measurements and several different methods: Stoelinga and Warner (SW99), Rapid Update Cycle (RUC), the Forecast System Laboratory (FSL), Decision Tree (DT), revised visibility (RVIS) and Gultepe_06 methods. The DT method showed a pattern similar to the observed fog occurrences. In this study, the Gulteppe_06 method produced the best performance under the lowest visibility situation, although there is some discrepancy in microphysics' simulated results, followed by DT and RUC.

With global warming and the rapid increase in urbanization accompanied by a concentration of population, the urban heat island effects (UHI) have become an important environmental issue. In this study, rooftop greening and permeable asphalt pavement were selected as measures to reduce urban heat island and applied to a simple virtual urban environment to simulate temperature change using ENVI-met. A total of five measures were tested by dividing the partial and whole area application of each measure. The results showed that the temperature range of the base experiment is 33.11-37.11 ℃, with the UTCI comfort level described as strong heat and very strong heat stress. A case applied permeable asphalt has a greater temperature difference than a rooftop greening case, the larger the area where each condition was applied, the greater the temperature change was.

In order to protect the lives and property of citizens, the central and local governments are responding by enacting municipal ordinances and regulations as the frequency of extreme weather conditions due to climate change increases and intensity increases gradually. Accordingly, the basic contents and strategies of domestic and foreign policies to cope with cold and heat waves were reviewed, referring to measures suitable for application to the Daegu metropolitan area. In addition, it is intended to provide a policy alternative to Daegu metropolitan area to minimize damage from extreme weather by identifying the current status, characteristics, and future prospects of extreme weather in Daegu metropolitan area. Since the damage caused by the cold wave in Daegu area is not as great as that of other regions, it is urgent to come up with cold wave measures for the health and transportation sectors, and to come up with measures against the heat wave as the damage caused by the heat wave is the most serious in the country. Also we will identify spatial characteristics so that the districts and counties with high vulnerability to extreme weather can be identified and implemented first, and present civic life-oriented facilities and civic action guidelines to overcome cold and heat waves.

Recently, a heavy rainfall with high spatial variation occurred frequently in the Korean Peninsula. The meteorological event that occurred in Busan on 3 May 2016 is characterized by heavy rain in a limited area. In order to clarify the reason of large spatial variation associated with mountain height and location of low level jet, several numerical experiments were carried out using the dynamic meteorological Weather Research and Forecasting (WRF) model. In this case study, the raised topography of Mount Geumjeong increased a barrier effect and air uplifting due to topographic forcing on the windward side. As a result, wind speed reduced and precipitation increased. In contrast, on the downwind side, the wind speed was slightly faster and since the total amount of water vapor is limited, the precipitation on the downwind side reduced. Numerical experiments on shifting the location of the lower jet demonstrated that if the lower jet is close to the mountain, its core becomes higher due to the effect of friction. Additionally, the water vapor convergence around the mountain increased and eventually the precipitation also increased in the area near the mountain. Hence, the location information of the lower jet is an important factor for accurately predicting precipitation.

Numerical experiments were carried out to investigate the effect of data assimilation of observational data on weather and PM (particulate matter) prediction. Observational data applied to numerical experiment are aircraft observation, satellite observation, upper level observation, and AWS (automatic weather system) data. In the case of grid nudging, the prediction performance of the meteorological field is largely improved compared with the case without data assimilations because the overall pressure distribution can be changed. So grid nudging effect can be significant when synoptic weather pattern strongly affects Korean Peninsula. Predictability of meteorological factors can be expected to improve through a number of observational data assimilation, but data assimilation by single data often occurred to be less predictive than without data assimilation. Variation of air pressure due to observation nudging with high prediction efficiency can improve prediction accuracy of whole model domain. However, in areas with complex terrain such as the eastern part of the Korean peninsula, the improvement due to grid nudging were only limited. In such cases, it would be more effective to aggregate assimilated data.

To establish initial response scenarios for nuclear accidents around the Kori nuclear power plants, the potential for radionuclide diffusion was estimated using numerical experiments and statistical techniques. This study used the numerical model WRF (Weather Research and Forecasting) and FLEXPART (Flexible Particle dispersion model) to calculate the three-dimensional wind field and radionuclide dispersion, respectively. The wind patterns observed at Gijang, near the plants, and at meteorological sites in Busan, were reproduced and applied to estimates of seasonally averaged wind fields. The distribution of emitted radionuclides are strongly associated with characteristics of topography and synoptic wind patterns over nuclear power plants. Since the terrain around the power plants is complex, estimates of radionuclide distribution often produce unexpected results when wind data from different sites are used in statistical calculations. It is highly probable that in the summer and autumn, radionuclides move south-west, towards the downtown metropolitan area. This study has clear limitations in that it uses the seasonal wind field rather than the daily wind field.

In order to investigate the PM10 concentration trend and its characteristics over five different sub area in Busan from 2013 to 2015, data analysis with considering air flow distribution according to its topography was carried out using statistical methodology. The annual mean concentrations of PM10 in Busan tend to decrease from 49.6㎍/m³ in 2013 to 46.9㎍/m³ in 2015. The monthly mean concentrations value of PM10 were high during spring season, from March to May, and low during summer and fall due to frequent rain events. The concentration of PM10 was the highest in five different sub-area in Busan. High concentration episodes over 90 percentile of daily PM10 concentration were strongly associated with mean daily wind speed, and often occurred when the westerly wind or southwesterly wind were dominant. Regardless of wind direction, the highest correlation of PM10 concentrations was observed between eastern and southern regions, which were geographically close to each other, and the lowest in the western and eastern regions blocked by mountains. Wind flow along the complex terrain in Busan is also one of the predominant factors to understand the temporal variation of PM10 concentrations.

In this study, we investigated the impact of different initial data on atmospheric modeling results using the Weather Research and Forecast (WRF) model. Four WRF simulations were conducted with different initialization in March 2015, which showed the highest monthly mean PM10 concentration in the recent ten years (2006-2015). The results of WRF simulations using NCEP-FNL and ERA-Interim were compared with observed surface temperature and wind speed data, and the difference of grid nudging effect on WRF simulation between the two data were also analyzed. The FNL simulation showed better accuracy in the simulated temperature and wind speed than the Interim simulation, and the difference was clear in the coastal area. The grid nudging effect on the Interim simulation was larger than that of the FNL simulation. Despite of the higher spatial resolution of ERA-Interim data compared to NCEP-FNL data, the Interim simulation showed slightly worse accuracy than those of the FNL simulation. It was due to uncertainties associated with the Sea Surface Temperature (SST) field in the ERA-Interim data. The results from the Interim simulation with different SST data showed significantly improved accuracy than the standard Interim simulation. It means that the SST field in the ERA-Interim data need to be optimized for the better WRF simulation. In conclusion, although the WRF simulation with ERA-Interim data does not show reasonable accuracy compared to those with NCEP-FNL data, it would be able to be Improved by optimizing the SST variable.

Freezing rain is a phenomenon when precipitation falls as a liquid rain drop, but freezes when it comes into contact with surfaces or objects. In this study, we investigated the predictability of freezing rain and its characteristics, which are strongly related with the occurrence of black ice using synoptic scale meteorological observation data. Two different cases occurred at 2012 were analyzed and in the presented cases, freezing rain often occurs in the low-level low pressure with the warm front. The warm front due to the lower cyclone make suitable environment in which snow falling from the upper layer can change into supercooled water. The 0℃ temperature line to generate supercooling water is located at an altitude of 850 hPa in the vertical temperature distribution. And the ground temperature remained below zero, as is commonly known as a condition for black ice formation. It is confirmed that the formation rate of freezing rain is higher when the thickness after 1000-850 hPa is 1290-1310 m and the thickness of 850-700 hPa layer is larger than 1540 m in both cases. It can also be used to predict and estimate the generation of freezing rain by detecting and analyzing bright bands in radar observation.

In order to simulate a typhoon precisely, the satellite observation data has been assimilated using WRF (Weather Research and Forecasting model) three-Dimensional Variational (3DVAR) data assimilation system. The observation data used in 3DVAR was GPS Radio Occultation (GPS-RO) data which is loaded on Low-Earth Orbit (LEO) satellite. The refractivity of Earth is deduced by temperature, pressure, and water vapor. GPS-RO data can be obtained with this refractivity when the satellite passes the limb position with respect to its original orbit. In this paper, two typhoon cases were simulated to examine the characteristics of data assimilation. One had been occurred in the Western Pacific from 16 to 25 October, 2015, and the other had affected Korean Peninsula from 22 to 29 August, 2012. In the simulation results, the typhoon track between background (BGR) and assimilation (3DV) run were significantly different when the track appeared to be rapidly change. The surface wind speed showed large difference for the long forecasting time because the GPS-RO data contained much information in the upper level, and it took a time to impact on the surface wind. Along with the modified typhoon track, the differences in the horizontal distribution of accumulated rain rate was remarkable with the range of 600~500 mm. During 7 days, we estimated the characteristics between daily assimilated simulation (3DV) and initial time assimilation (3DV_7). Because 3DV_7 demonstrated the accurate track of typhoon and its meteorological variables, the differences in two experiments have found to be insignificant. Using observed rain rate data at 79 surface observatories, the statistical analysis has been carried on for the evaluation of quantitative improvement. Although all experiments showed underestimated rain amount because of low model resolution (27 km), the reduced Mean Bias and Root-Mean-Square Error were found to be 2.92 mm and 4.53 mm, respectively.

Since the late 20th century, the urbanization in Korea has been rapidly increasing, especially in major cities like Seoul, as a result of industrialization. One of the aspects of urbanization is coating the surfaces with impervious concrete or asphalt that water cannot penetrate. In addition, various urban, such as urban heat islands, which also have a great impact on the urban environment, occur within the cities. Therefore, the urban environment is gradually becoming hot and dry, and the need for more urban parks to compensate for these negative impacts is growing. Thus, several numerical studies have been conducted to assess these problems using coupled Numerical Weather Prediction (NWP) and Computational Fluid Dynamics (CFD). In this study, an experiment was conducted to determine the accuracy of the area of the input field using Weather Research and Forecasting (WRF) model, and applying the more accurate input field to a numerical simulation using ENVI-met, in order to investigate the effect of urban parks on the thermal comfort. The results showed that an input field with a larger area is more accurate than that with a smaller area, because the surrounding terrain and cities are considered in details in the experiment with the larger area. Subsequently, the more accurate input field was used in ENVI-met, and the results of this simulation showed that the presence of the urban park increased the thermal comfort and improved the humidity conditions.

The initial and boundary conditions are important factors in regional chemical transport modeling systems. The method of generating the chemical boundary conditions for regional air quality models tends to be different from the dynamically varying boundary conditions in global chemical transport models. In this study, the impact of real time Copernicus atmosphere monitoring service (CAMS) re-analysis data from the modeling atmospheric composition and climate project interim implementation (MACC) on the regional air quality in the Korean Peninsula was carried out using the community multi-scale air quality modeling system (CMAQ). A comparison between conventional global data and CAMS for numerical assessments was also conducted. Although the horizontal resolution of the CAMS re-analysis data is not higher than the conventionally provided data, the simulated particulate matter (PM) concentrations with boundary conditions for CAMS re-analysis is more reasonable than any other data, and the estimation accuracy over the entire Korean peninsula, including the Seoul and Daegu metropolitan areas, was improved. Although an inland area such as the Daegu metropolitan area often has large uncertainty in PM prediction, the level of improvement in the prediction for the Daegu metropolitan area is higher than in the coastal area of the western part of the Korean peninsula.

Wind information is one of the major inputs for the prediction of urban air flow using computational fluid dynamic (CFD) models. Therefore, the numerical characteristics of the wind data formed at their mother domains should be clarified to predict the urban air flow more precisely. In this study, the formation characteristics of the wind data in the Seoul region were used as the inlet wind information for a CFD based simulation and were analyzed using numerical weather prediction models for weather research and forecasting (WRF). Because air flow over the central part of the Korean peninsula is often controlled not only by synoptic scale westerly winds but also by the westerly sea breeze induced from the Yellow Sea, the westerly wind often dominates the entire Seoul region. Although simulations of wind speed and air temperature gave results that were slightly high and low, respectively, their temporal variation patterns agreed well with the observations. In the analysis of the vertical cross section, the variation of wind speed along the western boundary of Seoul is simpler in a large domain with the highest horizontal resolution as compared to a small domain with the same resolution. A strong convergence of the sea breeze due to precise topography leads to the simplification of the wind pattern. The same tendency was shown in the average vertical profiles of the wind speed. The difference in the simulated wind pattern of two different domains is greater during the night than in the daytime because of atmospheric stability and topographically induced mesoscale forcing.

In order to clarify the contribution rate of PM concentration due to regional emission distribution, Brute force analysis were carried out using numerical estimated PM data from WRF-CMAQ. The emission from Kyeongki region including Seoul metropolitan is the largest contribution of PM concentration than that from other regions except for emission of trans-country and source itself. Contribution rate of self emission is also the largest at Kyeongki region and its rate reach on over 95 %. And the rate at Gangwon region also higher than any region due to synoptic wind pattern. Due to synoptic wind direction at high PM episode, pollutants at downwind area along from west to east and from north to south tends to mix intensively and its composition is also complicated. Although the uncertainty of initial concentration of PM, the contribution of regional PM concentration tend to depend on the meteorological condition including intensity of synoptic and mesoscale wind and PM emission pattern over upwind region.

In order to clarify the characteristics of PM10 in coastal and inland cities and their variation statistical analysis were carried out using environmental and meteorological data observed at Busan and Daegu metropolitans during 4 year from 2010. Averaged PM10 concentration was higher in industrial area than any other land-use sites, and its maximum value reach on over 50 ㎍/㎥ at Jangrim site in Busan. Temporal and spatial variations of PM10 concentration in Busan were more sharply, since topograph and mesoscale wind pattern in Busan is more complicated than those in Daegu. Correlation of PM10 concentrations between sites within Daegu appeared strongly and maximum values R2 is about 0.8. This indicate that because wind pattern induced by mesoscale forcing in Daegu are well unified, the variation of PM10 concentration tends to be similar in all sites within Daegu. However, due to complicate wind pattern induced by topography and coastal line, PM10 correlation of sites within Busan was weaker in comparison with in Daegu. And correlation of PM10 at same lane-use in Busan and Daegu tend to be related to the intensity of meteorological forcing, which can decide the intensity of wind pattern.

Emissions from aircraft have impacts on the air pollution of airport and the surrounding area. There are methods of emissions calculated as Tier 1, Tier2, Tier 3A and Tier 3B. Thus, this study investigated emissions from aircraft at the Gimhae International Airport using EDMS(Emissions & Dispersion Modeling System) program. Results of estimation from aviation emissions, Tier 3B considering all parts which can occur at the airport has the largest amount emissions. In order to understand the relation between aviation emissions and distribution of ozone concentration over airport area, numerical evaluation were carried out. Although the difference of surface ozone distribution between numerical assessment with and without aviation emissions was little, effects of air pollution at airport area from aviation emissions of NOx and VOCs.