In Korea, most temporary storage facilities for spent nuclear fuel are nearing saturation. As an alternative to this, the 2nd basic plan for high-level radioactive waste management specified the operation plan of dry interim storage facility. Meanwhile, the NSSC No. 2021-19 stipulates that it is necessary to evaluate the possibility and potential effect of accident before operating interim storage facility. Therefore, this study analyzed the categories of accident scenarios that may occur in dry storage facility as part of prior research on this. We investigated the case of categorization of dry storage facility accident scenarios of IAEA, NRC, KAREI, and KINS. The IAEA presented accident scenarios that could occur in on-site dry storage facility operated with silo and cask method. NRC has classified accident scenarios in dry storage facility and estimated the probability of accidents for each. KAERI and KINS selected major accident scenarios and analyzed the processes for each, in preparation for the introduction of dry storage facility in Korea in the future. Overall, a total of 10 accident scenarios were considered, and the scenarios considered by each institution were different. Among 10 scenarios, cask drop and aircraft collision were included in the categorization of most institutions. The results of this study can be used as basic data for cataloging accidents subject to safety evaluation when introducing dry interim storage facility in Korea in the future.

(Bi1/2Na1/2)TiO3 (BNT)-based ceramics are considered promising candidates for actuator application owing to their excellent electromechanical strain properties However, to obtain large strain properties, there remain several issues such as thermal stability and high operating fields. Therefore, this study investigates a reduction of operating field in (0.98-x)Bi1/2Na1/ 2TiO3-0.02 BiAlO3-xSrTiO3 (BNT-2BA-100xST, x = 0.20, 0.21, 0.22, 0.23, and 0.24) via analyses of the microstructure, crystal structure, dielectric, polarization, ferroelectric and electromechanical strain properties. The average grain size of BNT-2BA- 100xST ceramics decreases with increasing ST content. Results of polarization and electromechanical strain properties indicate that a ferroelectric to relaxor state transition is induced by ST modification. As a consequence, a large electromechanical strain of 592 pm/V is obtained at a relatively low electric field of 4 kV/mm in 22 mol% ST-modified BNT-2BA ceramics. We believe that the materials synthesized in this study are promising candidates for actuator applications.

Brucellosis is an important bacterial zoonotic infection worldwide responsible for economic losses in livestock industries which represents a considerable and increasing public health burden. The disease is caused by Brucella which possess the ability to invade and replicate within phagocytes and may result to chronic infection, leading to difficulty in medical therapy of the disease. The treatment for brucellosis employs conventional principles that have been applied for a long time and a combination of antibiotics is currently used due to low efficacy of monotherapies. However, vital effects with respect to health and safety are neglected. Nevertheless, the preventive methods and treatments for brucellosis using traditional medicine have not yet been thoroughly studied, hence, alternative therapies such as the use of natural plant extracts as traditional medicine that are safe, efficient and economical should be explored in order to identify candidates that eliminate complications due to brucellosis. Coptis chinensis Franch (Huanglian) is a traditional Chinese medicinal herb and its extract has been known to possess strong antibacterial activity. In this study, the antibacterial effects of C. chinensis Franch extracts, and the major components of the herb namely berberine and palmatine, were investigated on B. abortus. The C. chinensis Franch ethanol extracts (CCFE) showed bactericidal effects at 1,000 μg/ml concentration and berberine at 100 μg/ml concentration. However, C. chinensis Franch and its components did not affect invasion and intracellular growth of B. abortus in RAW 264.7 cells. In conclusion, C. chinensis Franch ethanol extracts, water extract and its major components such as berberine and palmatine would be a beneficial antimicrobial agent without affecting phagocytic pathway within macrophages, and further study for the precise mechanisms of antibacterial effect would be necessary.

Numerical Weather Prediction (NWP) models such as the Weather Research and Forecasting (WRF) model are essential for forecasting one-day-ahead solar irradiance. In order to evaluate the performance of the WRF in forecasting solar irradiance over the Korean Peninsula, we compared WRF prediction data from 2008 to 2010 corresponding to weather observation data (OBS) from the Korean Meteorological Administration (KMA). The WRF model showed poor performance at polluted regions such as Seoul and Suwon where the relative Root Mean Square Error (rRMSE) is over 30%. Predictions by the WRF model alone had a large amount of potential error because of the lack of actual aerosol radiative feedbacks. For the purpose of reducing this error induced by atmospheric particles, i.e., aerosols, the WRF model was coupled with the Community Multiscale Air Quality (CMAQ) model. The coupled system makes it possible to estimate the radiative feedbacks of aerosols on the solar irradiance. As a result, the solar irradiance estimated by the coupled system showed a strong dependence on both the aerosol spatial distributions and the associated optical properties. In the NF (No Feedback) case, which refers to the WRF-only stimulated system without aerosol feedbacks, the GHI was overestimated by 50–200 W m-2 compared with OBS derived values at each site. In the YF (Yes Feedback) case, in contrast, which refers to the WRF–CMAQ two-way coupled system, the rRMSE was significantly improved by 3.1–3.7% at Suwon and Seoul where the Particulate Matter (PM) concentrations, specifically, those related to the PM10 size fraction, were over 100 g m-3. Thus, the coupled system showed promise for acquiring more accurate solar irradiance forecasts.

A system coupled the prognostic WRF mesoscale model and CALMET diagnostic model has been employed for predicting high-resolution wind field over complex coastal area. WRF has three nested grids down to 1km during two days from 24 August 2007 to 26 August 2007. CALMET simulation is performed using both initial meteorological field from WRF coarsest results and surface boundary condition that is Shuttle Radar Topography Mission (SRTM) 90m topography and Environmental Geographic Information System (EGIS) 30m landuse during same periods above. Four Automatic Weather System (AWS) and a Sonic Detection And Ranging (SODAR) are used to verify modeled wind fields. Horizontal wind fields in CM_100m is not only more complex but better simulated than WRF_1km results at Backwoon and Geumho in which there are shown stagnation, blocking effects and orographically driven winds. Being increased in horizontal grid spacing, CM_100m is well matched with vertically wind profile compared SODAR. This also mentions the importance of high-resolution surface boundary conditions when horizontal grid spacing is increased to produce detailed wind fields over complex terrain features.