The thermocatalytic decomposition of methane is a promising method for hydrogen production. To determine the cause of carbonaceous catalyst deactivation and to produce high-value carbon, methane decomposition behavior and deactivated catalysts were analyzed. The surface properties and crystallinity of a commercial activated carbon material, MSP20, used as a methane decomposition catalyst, varied with the reaction time at a reaction temperature of 900 °C. During the initial reaction, MSP20 provided a methane conversion of ≥ 50%; however, the catalyst exhibited rapid deactivation as crystalline carbon grew at surface defects; after 15 min of reaction, approximately 33% methane conversion was maintained. With increasing reaction time, the specific surface area of the catalyst decreased, whereas crystallinity increased. The R-square value of the conversion–crystallinity relationship was significantly higher than that of the conversion–specific surface area relationship; however, neither profile was linear. The activity of the activated carbon catalyst for methane decomposition is mainly determined by the complex actions of the specific surface area and defect sites. The activity was maintained after an initial sharp decline caused by the continuous growth of crystalline carbon product. This study presents the application of carbonaceous catalysts for the decomposition reaction of methane to form COx- free hydrogen, while simultaneously yielding porous carbon materials with an improved electrical conductivity.

Cloned calves derived from somatic cell nuclear transfer (SCNT) have been frequently lost by sudden death at 1 to 3 month following healthy birth. To address whether placental anomalies are responsible for the sudden death of cloned calves, we compared protein patterns of 2 placentae derived from SCNT of Korean Native calves died suddenly at two months after birth and those of 2 normal placentae obtained from AI fetuses. Placental proteins were separated using 2-Dimensional gel electrophoresis. Approximately 800 spots were detected in placental 2-D gel stained with coomassie-blue. Then, image analysis of Malanie III (Swiss Institute for Bioinformatics) was performed to detect variations in protein spots between normal and SCNT placentae. In the comparison of normal and SCNT samples, 8 spots were identified to be up-regulated proteins and 24 spots to be down-regulated proteins in SCNT placentae, among which proteins were high mobility group protein HMG1, apolipoprotein A-1 precursor, bactenecin 1, tropomyosin beta chain, H+-transporting ATPase, carbonic anhydrase II, peroxiredoxin 2, tyrosine-rich acidic matrix protein, serum albumin precursor and cathepsin D. These results suggested that the sudden death of cloned calves might be related to abnormal protein expression in placenta.

We construct a simple photometric evolution model of galaxies based on the evolutionary population synthesis. In our models an exponentially decreasing SFR with a power law IMF is used to compute the UBV colors of galaxies from ellipticals to late type spirals. It is shown that the integrated colors of galaxies with different Hubble type can be explained by one parameter, SFR.

Making use of our extended version of ¨ O p i k ′ s convection theory, we have calculated magnetic cycle periods of the sun and late type stars by using Parker's dynamo theory, where we have included the non-linear effect. We presented a relationship between the computed cycle period and spectral type to analyze observed magnetic activities of the late type stars and long-term luminosity variations. It is found that (1) the stellar magentic-cycle period increases towards the later spectral type, (2) the rapid rotation facilitates the activity-related luminosity variation of stars later than about K5, (3) differential rotation plays a critical role in determining the magnetic activity-cycle period, and (4) the non-local effect should be taken into account in order to understand the observed long-term luminosity variations.

A generalization of the original ¨ O p i k ′ s cellular convection theory has been made to accomodate a rotating convective medium. With the use of the formulation, a set of rotating model envelopes of the sun and late type main sequence stars have been constructed under three different rotation periods. Their thermal structures are presented and characteristics of their convection are discussed in the context of stellar dynamo. In the present study it is noted that the rotational angular velocity increases in wards with depth, and its increase turns out to be about 6% at the bottom of the solar convection zone.

Background : Recently, there is a urgent demand for development of new varieties with enhanced resistance to various biotic/abiotic stresses. In order to develop ginseng varieties with such traits, systematic breeding program and comprehensive field studies are prerequisite. Methods and Results : ‘Cheonmyeong' seeds were collected in 2008 from the farmer field of Buyeo. Physiological investigation and propagation were conducted from 2009 to 2011. It was given the name 'Eumseong No. 8 through the observed yield trial from 2012 to 2013 and local adaptability was carried out from 2014 to 2015. All phenotypes including agronomic characteristics, seed yield, and physiological response to biotic/abiotic stresses were investigated according to the ginseng GAP and UPOV guidelines. Yellow-red leaf and pink berry at maturing stage were observed. The time of emergence, flowering and berry maturity of the ‘Cheonmyeong’ were faster than those of ‘Chunpoong’. Stem length of ‘Cheonmyeong’ was shorter than that of ‘Chunpoong’, whereas stem diameter was thicker than that of ‘Chunpoong’. Main root length was shorter but main root diameter is thicker than that of ‘Chunpoong’. Number of seeds of ‘Cheonmyeong’ was fewer than that of ‘Chunpoong’ but 1,000-seeds weight and stratification rate were higher than those of ‘Chunpoong’. The yield performance of this variety was 661 kg/10 a in local adaptability test for two years, which is 22% higher than that of ‘Chunpoong’. ‘Cheonmyeong’ showed strong resistance to phytophthora blight, mulberry mealybug and nematode and moderate resistance to alternaria blight. ‘Cheonmyeong’ did almost not occur yellow spot of aerial part and rusty skin of root, show moderate resistance at high temperatures. Conclusion : Our study demonstrated that ‘Cheonmyeong’ is an ideal variety with heavier root weight and enhanced stress resistance and contribute will enhance biotic/abiotic stress resistance and increase the farmers' income.

Background : Water uptake and flow across cellular membranes is a fundamental requirement for plant growth and development, and plant water status is important not only for plant growth under favorable conditions but also for ability of a plant to tolerate adverse environmental conditions. Thus identification of plasma membrane water channel genes (aquaporins) in ginseng provides extensive information for functional studies and the development of markers for salinity stress tolerance. Methods and Results : For salinity treatment, the plants were grown for 4 weeks in culture medium gelled with 0.8% Phytoagar, and the old media were replaced with the fresh medium containing NaCl at 0, 50, 100, 200 and 400 mM, respectively. The samples for stress treated and non-stressed plants were collected from 6h to 72h, and frozen immediately into liquid nitrogen. According to the sequence information from the assembled transcripts, four primer pairs were designed from the aquaporin gene regions. In order to determine the pattern of aquaporins expression in ginseng seedlings to salinity stress, we conducted semi-quantitative RT-PCR. Conclusion : A tonoplast intrinsic protein 1 (TIP1)-type aquaporin is not only believed to be essential for plant life, but also to be beneficial for growth under salinity stress. Therefore, a deeper understanding of aquaporin genes in ginseng will be essential for crop improvement, which could help us to understand the molecular genetic basis for the ginseng genetic improvement and also provide the functional genetic resources for selective breeding and transgenic research.

Background : This study was carried out to understand the effect of seedling weight (SW) on growth and flowering in Panax ginseng. Methods and Results : The testing materials were Chunpoong (CP), Yunpoong (YP) and Jakyeongjong (JK). The increase of seedling (1yr) weight led to an increase in ratio of flowering plant and in number of flower per plant. The seed setting rate of two year-old plant (CP, YP, JK) increased with increase of SW at the planting time (PT) and number of flower per plant of three year-old plant (CP, YP) increased also. In the two year-old plant (JK), the ratio of three leaves per plant was 8.8, 19.6, 31.0, 42.0, 44.7 and 58.2%, respectively, in the SW of >0.6, 0.6~0.8, 0.8~1.0, 1.02~1.2, 1.2~1.4 and 1.4g<. The growth of ginseng plant was good with increase of SW at the PT. Conclusion : There was a highly positive correlation between seedling weight and flowering characteristics.

Background : Due to immature development of embryo in ripened berries, dehiscence process is required for the proper germination of ginseng seeds. Such process involves the preparation of the container with alternating layers of seed and moist sand. In order to make sand fully moist, water sprayer has been usually used by farmers, which is labor intensive, time consuming and causing uneven sand moisture. Methods and Results : In this study, we investigated the effects of different stratification methods on dehiscence ratio of ginseng seeds. Ginseng seeds were stratified for 90 days in a total of 12 different treatments and the dehiscence ratios were compared; drainage methods, drainage time, the ratio between ginseng seeds and sand, and etc. Seed stratification process was performed according to the guideline of ginseng GAP. One thousand ginseng seeds were used for each treatment. It was found that the average of dehiscence of the 12 treatments was 84.6 %. The highest dehiscence ratio (90.3 %) was observed in the seeds that were treated with water soaking, immediately followed by drainage. Higher ratio was also observed in the seeds that were soaked for 60 min, followed by drainage. Therefore, our findings indicate that ginseng seeds soaked in water less than 60 min could dehisce more efficiently than traditional method. Conclusion : Our study demonstrated that ginseng seeds that are subjected to water soaking and then drainage showed better ration of dehiscence. This method will eventually decrease the time and labor used for seed stratification.

Background : This study was conducted to determine the impact of temperature elevated and the effect of transplanting times based on climate change scenario on growth of 2-year-old korean ginseng (Panax ginseng C. A. Meyer.) in temperature gradient chambers (TGC). Methods and Results : As a plant materials, ‘Yunpoong’ was cultivated in TGC at ambient temperature(Amb), Amb+2℃, Amb+4℃ and Amb+6℃ respectively. Ginseng was also transplanted on March 29, April 12 and 26 respectively. Investigation on characteristic of aerial parts were carried out on 28, 56, 84 and 112 days after transplanting and characteristic of roots were conducted on October 19. As transplanting time was faster and temperature was higher, the growth of aerial parts were increased. Compared with those of ginseng transplanted on March 29 with Amb, the root weight which tend to decrease depending on late transplanting time and high temperature decreased about 11.1%, 35.4% and 42.4% in Amb+ 2℃, Amb+4℃ and Amb+6℃ respectively. Ginseng transplanted on April 12 and 26 decreased about 20.9%, 33.9% respectively. Conclusion : Consequently, the more transplanting time extend, the more quantity increased in all temperature treatment. So, it is possible to increase in quantity to advance transplanting time although high temperature will be caused by the climate change.

Background : When ginseng seeds were gathered, the seeds were unripe. To grow immature embryo definitely, special treatment called dehiscence must be performed. Even though dehiscence is completed, most ginseng seeds are on enforced dormancy. The breaking seed dormancy is generally achieved using cold treatment. Also it is reported that gibberellin treatment can replace the treatment. It is very time consuming process in order to develop new ginseng cultivar because ginseng flowers after 3 years of growth. To shorten the ginseng breeding period, it is necessary to establish fast generation progress. Therefore, this study examined the possibility of breaking seed dormancy of ginseng using GA3 treatment and alternating temperature. Methods and Results : Seeds were obtained from local variety fruit which is not inbred. Gibberellin of 100 ppm was treated at seeds for 24 hours. Fixed cold condition was treated on both –2℃ and 2℃. Alternating cold condition was treated on 2℃ and then –2℃, finally 2℃. Fixed and alternating temperature was continued for 15, 30, 45, 60, 90 days that 15 days of alternating temperature is first 2℃ for 5days and then -2℃ for 5days, finally 2℃ for 5days. The other treatment periods such as 30, 45, 60, 90 days mean 10, 15, 20, 30 days respectively. Each of 48 seeds were sowed on tray in greenhouse at 3 replication. Experimental plot was completely randomized. Conclusion : Seeds untreated with GA3 were germinated little and there is no difference between 2℃ and –2℃. Alternating temperature until 60days made no difference with fixed temperature but germination rate increased up to 70.8% when seeds were treated for 90days. Germination of seeds treated with GA3 is much higher than untreated seeds especially combined with alternating temperature.

Background : Correct identification of Panax species is important to ensure food quality, safety, authenticity and health for consumers. This paper describes a high resolution melting (HRM) analysis based method using internal transcribed spacer (ITS) and 5.8S ribosomal DNA barcoding regions as target (Bar-HRM) to obtain barcoding information for the major Panax species and to identify the origin of ginseng plant. Methods and Results : A PCR-based approach, Bar-HRM was developed to discriminate among Panax species. In this study, the ITS1, ITS2, and 5.8S rDNA genes were targeted for testing, since these have been identified as suitable genes for use in the identification of Panax species. The HRM analysis generated cluster patterns that were specific and sensitive enough to detect small sequence differences among the tested Panax species. Conclusion : The results of this study show that the HRM curve analysis of the ITS regions and 5.8S rDNA sequences is a simple, quick, and reproducible method. It can simultaneously identify three Panax species and screen for variants. Thus, ITS1HRM and 5.8SHRM primer sets can be used to distinguish among Panax species.