Molten chloride salts have received considerable research attention as potential nuclear fuel and coolant candidates for molten salt reactors. However, there are several challenges, especially for structural materials due to the selective dissolution of chromium (Cr) in the molten chloride salts environment. Understanding the compatibility of uranium (U), which is used as nuclear fuel in molten salt reactors, with Cr in molten chloride salts is critical for designing the molten salt reactor structure. Therefore, in this study, the cyclic voltammetry (CV) was used to investigate the electrochemical behaviors of U and Cr. The diffusion coefficients and formal potentials were obtained. The electrochemical properties of uranium and chromium were investigated by CV in molten NaCl-MgCl2 salt at 600°C. Tungsten rods for working and counter electrode, and Ag/AgCl for reference electrode were utilized in this experiment. UCl3 made from the chemical dissolution of U rods and CrCl2 (Sigma-Aldrich, 99.99%) were used. Diffusion coefficients (D) of U and Cr were calculated by measuring reduction peak current of U3+/U and Cr2+/Cr from CV curves and using the Berzins-Delahay equation; D (U3+/U) = 3.0×10-5 cm2s-1 and D (Cr2+/Cr) = 3.3×10-5 cm2s-1. The formal potentials were also calculated by using the reduction peak potential obtained from CV results; E0’ (U3+/U) = -1.173 V and E0’ (Cr2+/Cr) = -0.321 V. The ionization tendency was investigated by comparing each reduction peak potential. The reduction peak potential Ep,c was increasing order of Ep,c (U3+/U) < Ep,c (Cr2+/Cr) < Ep,c (U4+/U3+). It can be seen that in the presence of U4+ and Cr metals, the Cr in the alloy can dissolve into Cr2+, but in the presence of U3+ and Cr metals, the Cr in the alloy does not dissolve into Cr2+. By analyzing the CV curve, diffusion coefficients and formal standard potentials were obtained. The result of comparing reduction peak potentials suggests that the nuclear fuel using U4+ should be inhibited to prevent the selective dissolution of Cr.

The ultimate objective of deep geological repositories is to achieve complete segregation of hazardous radioactive waste from the biosphere. Thus, given the possibility of leaks in the distant future, it is crucial to evaluate the capability of clay minerals to fulfill their promising role as both engineered and natural barriers. Selenium-79, a long-lived fission product originating from uranium- 235, holds significant importance due to its high mobility resulting from the predominant anionic form of selenium. To investigate the retardation behaviors of Se(IV) in clay media by sorption, a series of batch sorption experiments were conducted. The batch samples consisted of Se(IV) ions dissolved in 0.1 M NaCl solutions, along with clay minerals including kaolinite, montmorillonite, and illite-smectite mixed layers. The pH of the samples was also varied, reflecting the shift in the predominant selenium species from selenious acid to selenite ion as the environment can shift from slightly acidic to alkaline conditions. This alteration in pH concurrently promotes the competition of hydroxide ions for Se(IV) sorption on the mineral surface as the pH increases and impedes the selective attachment of selenium. The acquired experimental data were fitted through Langmuir and Freundlich sorption isotherms. From the Freundlich fit data, the distribution coefficient values of Se(IV) for kaolinite, montmorillonite, and illite-smectite mixed layer were derived, which exhibited a clear decrease from 91, 110, 62 L/kg at a pH of 3.2 to 16, 6.3, 12 L/kg at a pH of 7.5, respectively. These values derived over the pH range provide quantitative guidance essential for the safety assessment of clay mineral barriers, contributing to a more informed site selection process for deep geological repositories.

The domestic Pressurized Heavy Water Reactor (PWHR) nuclear power plant, Wolsong Unit 1, was permanently shut down on December 24, 2019. However, research on decommissioning has mainly focused on Pressurized Water Reactors (PWRs), with a notable absence of both domestic and international experience in the decommissioning of PHWRs. If proper business management such as radiation safety and waste is not performed, it can lead to increased business risks and costs in decommissioning. Therefore, the assessment of waste volume and cost, which provide fundamental data for the nuclear decommissioning process, is a crucial technical requirement before initiating the actual decommissioning of Wolsong Unit 1. Decommissioning radiation-contaminated structures and facilities presents significant challenges due to high radiation levels, making it difficult for workers to access these areas. Therefore, technology development should precede decommissioning process assessments and safety evaluations, facilitating the derivation of optimal decommissioning procedures and ensuring worker safety while enhancing the efficiency of decommissioning operations. In this study, we have developed a program to estimate decommissioning waste amounts for PHWRs, building upon prior research on PWR decommissioning projects while accounting for the specific design characteristics of PHWRs. To evaluate the amount of radioactive waste generated during decommissioning, we considered the characteristics of radioactive waste, disposal methods, packaging container specifications, and the criteria for the transfer of radioactive waste to disposal operators. Based on the derived algorithm, we conducted a detailed design and implemented the program. The proposed program is based on 3D modeling of the decommissioning components and the calculation of the Work Difficulty Factor (WDF), which is used to determine the time weighting factors for each task. Program users can select the cutting and packaging conditions for decommissioning components, estimate waste amount based on the chosen decommissioning method, and calculate costs using time weighting factors. It can be applied not only to PHWRs, but also to PWRs and non-nuclear fields, providing a flexible tool for optimizing decommissioning process.

The thermocatalytic decomposition of methane is a promising method for hydrogen production. To determine the cause of carbonaceous catalyst deactivation and to produce high-value carbon, methane decomposition behavior and deactivated catalysts were analyzed. The surface properties and crystallinity of a commercial activated carbon material, MSP20, used as a methane decomposition catalyst, varied with the reaction time at a reaction temperature of 900 °C. During the initial reaction, MSP20 provided a methane conversion of ≥ 50%; however, the catalyst exhibited rapid deactivation as crystalline carbon grew at surface defects; after 15 min of reaction, approximately 33% methane conversion was maintained. With increasing reaction time, the specific surface area of the catalyst decreased, whereas crystallinity increased. The R-square value of the conversion–crystallinity relationship was significantly higher than that of the conversion–specific surface area relationship; however, neither profile was linear. The activity of the activated carbon catalyst for methane decomposition is mainly determined by the complex actions of the specific surface area and defect sites. The activity was maintained after an initial sharp decline caused by the continuous growth of crystalline carbon product. This study presents the application of carbonaceous catalysts for the decomposition reaction of methane to form COx- free hydrogen, while simultaneously yielding porous carbon materials with an improved electrical conductivity.

최근 국내에서는 꿀벌 대량소실 현상이 2022년부터 전국적으로 발생하고 있다. 우리나라 뿐 만 아니라, 전세계 적으로 양봉산업에 큰 위협이 되고 있는 봉군붕괴현상은 2016년 미국에서 세계 최초로 보고되었다. 국내에서는 2022년 민관 합동조사 결과, 이상기온, 응애, 말벌 등이 주요 원인으로 지목되었다. 대량소실 현상을 보인 양봉농 가와 정상 농가의 병원체 검출 비교 결과, 유의성있게 검출이 증가되는 병원체는 발견되지 않았다. 그러나, Tyrophagus mite, Trypanosome, Lake Sinai virus, Apis mellifera filamentous virus 등의 신종 응애, 원충 및 바이러 스 감염이 추가로 확인되었다. 국내에서 새롭게 감염이 확인된 기생충과 병원체가 대량소실, 나아가 봉군붕괴현 상에 직간접적으로 영향을 주었을 것으로 사료되며, 지속적인 조사와 연구개발을 통해 기후등 환경변화에 따른 신종 질병 검색과 대책을 마련해야 할 것이다.

주방세제의 진딧물 살충효과와 분국화 생육에 미치는 영향 을 알아보기 위해 실험을 수행하였다. 복숭아혹진딧물과 목화 진딧물을 대상으로 주방세제 100, 200, 400배액 단용처리와 주방세제 400배액 100mL에 소주 10mL 또는 20mL를 혼용 하여 분무 처리하였다. 그 결과 주방세제 400배 이하의 모든 농도에서 복숭아혹진딧물은 85%, 목화진딧물은 90%의 살충 률을 보였다. 주방세제와 소주 혼용처리에 의한 살충효과 상 승은 보이지 않았다. 하우스안에서 진딧물이 많이 발생한 분 국화 잎에 400배액 이하의 농도로 3일 간격으로 2회 처리함 으로써 90% 이상의 진딧물이 감소되는 효과를 얻을 수 있었 다. 또한 분국화를 재배하면서 3~4일 간격으로 5주간 지속적 으로 주방세제를 처리했을 때, 대조구에서는 90% 잎에서 진 딧물이 발생한데 비해, 모든 주방세제 단독 처리구에서는 발 생율이 15% 이하로 낮게 유지되었다. 또한 국화의 생체중, 초 장, 엽수는 주방세제 농도가 높아질수록 조금씩 낮아지는 경 향이었으나, 초폭이나 분지수에서는 차이가 없었다. 그러나 주방세제 200배 이하의 농도에서는 국화의 잎이 갈변되거나 꽃잎 끝이 백화되는 약해가 관찰되었다.

With the aging of nuclear power plants (NPPs) in 37 countries around the world, 207 out of 437 NPPs have been permanently shutdown as of August 2022 according to the IAEA. In Korea, the decommissioning of NPPs is emerging as a challenge due to the permanent shutdown of Kori Unit 1 and Wolsong Unit 1. However, there are no cases of decommissioning activities for Heavy Water Reactor (HWR) such as Wolsong Unit 1 although most of the decommissioning technologies for Light Water Reactor (LWR) such as Kori Unit 1 have been developed and there are cases of overseas decommissioning activities. This study shows the development of a decommissioning waste amount/cost/process linkage program for decommissioning Pressurized Heavy Water Reactor (PHWR), i.e. CANDU NPPs. The proposed program is an integrated management program that can derive optimal processes from an economic and safety perspective when decommissioning PHWR based on 3D modeling of the structures and digital mock-up system that links the characteristic data of PHWR, equipment and construction methods. This program can be used to simulate the nuclear decommissioning activities in a virtual space in three dimensions, and to evaluate the decommissioning operation characteristics, waste amount, cost, and exposure dose to worker. In order to verify the results, our methods for calculating optimal decommissioning quantity, which are closely related to radiological impact on workers and cost reduction during decommissioning, were compared with the methods of the foreign specialized institution (NAGRA). The optimal decommissioning quantity can be calculated by classifying the radioactivity level through MCNP modeling of waste, investigating domestic disposal containers, and selecting cutting sizes, so that costs can be reduced according to the final disposal waste reduction. As the target waste to be decommissioning for comparative study with NAGRA, the calandria in PHWR was modeled using MCNP. For packaging waste container, NAGRA selected three (P2A, P3, MOSAIK), and we selected two (P2A, P3) and compared them. It is intended to develop an integrated management program to derive the optimal process for decommissioning PHWR by linking the optimal decommissioning quantity calculation methodology with the detailed studies on exposure dose to worker, decommissioning order, difficulty of work, and cost evaluation. As a result, it is considered that it can be used not only for PHWR but also for other types of NPPs decommissioning in the future to derive optimal results such as worker safety and cost reduction.

Ulva compressa Linnaeus (UCL) is a green algae seaweed that performs photosynthesis and is used as a food material in some Asian regions including Korea. It is known to be the dominant species in copper ion-contaminated seas, and many studies on copper ion resistant mechanisms have been reported. UCL is known to have an excellent antioxidant effect, but limited information is available regarding its other physiological activities. In this study, we investigated the anticancer activity of 30% prethanol extracts of Ulva compressa Linnaeus (30% PeUCL) and the underlying mechanisms of its activity on human FaDu hypopharyngeal squamous carcinoma cells. The 30% PeUCL extracts suppressed FaDu cell viability without affecting normal cells (L929), as determined by MTT and viability assays. Furthermore, the 30% PeUCL extracts induced apoptosis, as determined by DAPI staining. The 30% PeUCL extracts inhibited colony formation effectively as well as wound-healing of FaDu cells, even at noncytotoxic concentrations. In addition, 30% PeUCL extracts induced apoptosis significantly through proteolytic cleavage of caspase-3, -7, and -9, and poly (ADP-ribose) polymerase, and by downregulation of Bcl-2 and upregulation of Bax in FaDu cells, as determined by Western blot analysis. Collectively, these results suggest that the inhibitory effect of 30% PeUCL extracts on the growth of oral cancer cells, colony formation and wound-healing may be mediated by caspase- and mitochondrial-dependent apoptotic pathways in human FaDu hypopharyngeal squamous carcinoma cells. Therefore, 30% PeUCL extracts can be administered as a natural chemotherapeutic drug for the treatment of human oral cancers.

The bacterial soft-rot disease is one of the most critical diseases in vegetables such as Chinese cabbage. The researchers isolated two bacteria (Pseudomonas kribbensis and Pantoea vagans) from diseased tissue samples of Chinese cabbages and confirmed them as being the strains that cause soft-rot disease. Lactic-acid bacteria (LAB), were screened and used to control soft-rot disease bacteria. The researchers tested the treatments with hypochlorous acid water (HAW) and LAB supernatant to control soft-rot disease bacteria. The tests confirmed that treatments with the HAW (over 120 ppm) or LAB (Lactobacillus plantarum PL203) culture supernatants (0.5 mL) completely controlled both P. kribbensis and P. vagans.

Currently, the interim storage pools of spent fuels in South Korea are expected to become saturated from 2024. It is required to prepare an operation plan of a domestic dry storage facility during a long-term period, with the researches on safety evaluation methods. This study modified the FRAPCON code to predict the spent fuel integrity evaluation such as the axial cladding temperature, the hoop stress and hydrogen distribution in dry storage. The cladding temperature in dry storage was calculated using the COBRA-SFS code with the burnup information which was calculated using the FRAPCON code. The hoop stress was calculated using the ideal gas equation with spent fuel information such as rod internal pressure. Numerical analysis method was used to calculate the degree of hydrogen diffusion according to the hydrogen concentration and temperature distribution during a dry storage period. Before 50 years of dry storage, the cladding temperature and hoop stress decreased rapidly. However, after 50 years, they decreased gradually and the cladding temperature was below 400 K. The initial temperature distribution and hydrogen concentration showed a parabolic line, but hydrogen was transferred by the hydrogen concentration and temperature gradient over time.

이끼의 분쇄번식 시, 가장 적합한 배양토, 광, 온도를 구명 하기 위해 날개양털이끼(Brachythecium plumosum)와 쥐꼬리이끼(Myuroclada maximowiczii)를 이용하여 실험을 수행하였다. 실험 개시 4주 후에 사진을 찍어 Photoshop에서 이끼 면적과 녹색 평균값을 구하여 이끼의 생육 정도를 나타내었다. 배양토의 경우, 두 이끼 모두 다스란 상토에서 생육이 가장 좋았고, 상토:마사토(50:50), 원예상토, 마사토:피트모스(50:50) 에서는 비슷한 수준이었다. 버미큘라이트 단용에서는 생육이 부진하였다. 광도실험에서는 날개양털이끼는 25umol･m-2･s-1 에서 100umol･m-2･s-1까지 광도가 높아질수록 생육이 조금씩 좋아지는 경향이었으나, 쥐꼬리이끼는 3개의 광환경에서 비슷한 수준이었다. 온도 실험에서는 두 이끼 모두 23℃에서 면적과 녹색값이 가장 높아 생육도 좋았다. 이러한 결과를 종합 하면, 건조한 이끼를 분쇄하여 번식할 때, 배양토로는 보습력이 좋은 다스란 상토나 원예용 상토가 무난하며, 광도는 25~100umol･m-2･s-1 범위, 온도는 20~23℃가 적당할 것으로 판단된다.