The chemical composition of 86 species of native plants in Korea, including plants to be afforestation, was analyzed. The chemical composition of the species analyzed was different. The species with the highest extractable content was Viburnum dilatatum (3.91%), and the species with the lowest extractable content was Ligustrum lucidum (0.11%). The lignin content ranged from 12 to 39%, with an average of 25%. The species with the highest lignin content was Chaenomeles lagenaria (39.37%). Hemicellulose content ranged from 18 to 52%, with the highest species being Thuja occidentalis (51.22%) and Eucommia ulmoides (48.84%). Cellulose content ranged from 25 to 58%, and the species with the highest content were Prunus serrulata (57.67%), Diospyros kaki (57.14%), Aesculus turbinata (53.29%), Albizia julibrissin (53.02%), and Zelkova serrata (52.29%). The chemical composition was different for each use taxon of 86 plant species. The lignin content was the highest in the fruit group and the lowest in the group other than recommended species for afforestation. Cellulose content was highest in non-reforestation-recommended tree species and lowest in fruit trees. In classification according to tree height, lignin content was higher in shrubs than in tall trees, and cellulose content was highest in tall trees. Between deciduous and evergreen trees, the lignin content was high in deciduous trees (26.46%), and the cellulose content was also high in deciduous trees (44.01%). As a result of analyzing the correlation between each compound, there was a difference. There tended to be a positive correlation between extractives and lignin content. There was a negative correlation between extractives and holocellulose content, hemicellulose and cellulose. The higher extract content affected the cellulose content much more than hemicellulose. Also, the higher the lignin content, the lower the cellulose content. The species with low lignin content and high cellulose content were Diospyros kaki and Prunus serrulata var. spontanea. This result is expected to be primary data for bioenergy, pulp industry and bioindustry.

이 연구는 코르크보드를 보강하여 건축부재 및 놀이기구의 안전부재 등으로 폭넓게 활용할 것을 목적으로 코르크보드의 중층에 금속, 유리섬유, 탄소섬유를 삽입하여 보강한 3종의 코르크복합보드를 제조하였고, 코르크복합보드의 수분흡수에 따른 치수안정성 및 접착층 박리성능을 조사하였다. 코르크복합보드의 흡수율은 0.37% - 0.45%의 범위에 있었고, 코르크보드에 비해 0.61배 - 0.74배의 낮은 값을 나타내었다. 코르크복합보드의 두께팽창률은 0.92% - 1.58%의 범위에 있었고, 코르크보드 보다 1.4 - 2.4배의 높은 값을 나타내었다. 그러나 이 값들은 일반 목질보드보다 현저히 낮았고, KS규격의 12%이하를 하회하는 것이 확인되었다. 코르크복합보드의 준내수 및 내수침지박리시험후의 접착층박리율은 0%로 전혀 접착층의 박리가 일어나지 않아 우수한 내수성을 나타내었고, 흡수율과 흡수두께팽창률은 상온침지에 비해 다소 증가하였으나, 목질보드에 관한 KS규격을 하회하는 우수한 치수안정성을 나타내는 것이 확인되었다.

Fulvic acid, a humic substance with unique properties, has sparked interest due to its potential applications in the treatment of allergic diseases, Alzheimer's disease, and as a microplastic adsorbent. However, conventional extraction methods produce insufficient quantities for commercial use, which has prompted research to enhance fulvic acid production. In this study, we investigated the impact of Saccharomyces cerevisiae fermentation on the yield and spectral characteristics of fulvic acid extracted from white peat. Fulvic acid was extracted from both S. cerevisiae-treated and untreated white peats using acid precipitation. The yield of fulvic acid from the S. cerevisiae treated group reached its highest at 3.5 % after 72 hr of fermentation, which was significantly higher than the untreated group (1.1 %). Fourier Transform Infrared (FTIR) analysis revealed similarities in functional groups and characteristic absorption bands between the treated and untreated fulvic acid samples. These findings suggest that S. cerevisiae fermentation can increase the yield of fulvic acid extracted from white peat, providing a promising approach for enhancing the commercial viability of fulvic acid production.

Cordyceps militaris (C. militaris) is a unique and valuable medicinal fungus belonging to the Cordyceps species. C. militaris is the only fungus that contains cordycepin which is a biologically active compound. In previous studies, light-emitting diodes (LEDs) are known to be effective in increasing cordycepin content, but metabolic profiling of LED-stimulated C. militaris has not been confirmed. Metabolic profiling is essential to understanding the metabolic regulation of cordycepin. This study studied the physiologically active secondary metabolites of C. militaris according to the presence or absence of stimulation of LEDs through GC-MS analysis. Most of the metabolites were detected in both samples, but there was a clear difference in the detected concentration. In particular, C. militaris had a significant difference in amino acid levels when stimulated with LEDs. Our results suggested that LEDs could stimulate amino acid synthesis in C. militaris mycelium to increase the cordycepin content.

한국산 억새를 산, 알칼리 및 증기폭쇄법으로 전처리한 시료의 최적 효소당화조건을 탐색하고, 당화물을 이용한 에탄올 생산성을 구명하였다. 억새의 화학적 조성은 저분자화합물이 5.0%, lignin 17.0%, hemicellulose 55.1%, cellulose 22.7%이었다. 효소 당화율은 단용효소 처리구보다 혼용효소 처리구에서 높았다. Celluclast 처리구는 Viscozyme보다 높은 당화율을 보였으며, 가장 높은 당화율을 보인 효소 처리구는 EM-3(Celluclast 24.3FPU/g 기질+Viscozyme 80.6FBG/g 기질)로 약 70%의 당화율을 보였다. 산,알칼리 전처리를 통해 정제된 α-cellulose의 효소 당화율은 1% NaOH 처리 증기폭쇄재 보다 16% 높게 나타났다. 효소 cocktail의 당화에 가장 적합한 온도는 50℃였고, 모든 기질에서 효소 반응시간이 증가할수록 당화율이 증가하였다. 억새의 당화물은 오탄당으로 xylose가 육탄당으로 glucose가 주를 이루었다. S. cerevisiae KCCM 11215를 이용한 당화물의 에탄올 발효에서도 각 효소조합과 시료 전처리가 매우 중요한 것으로 나타났다. 억새시료 1kg 당 350g 이상의 에탄올 생산성을 보였으며, 1% NaOH 및 1% KOH를 처리한 증기폭쇄 시료보다 α-cellulose를 기질로 사용한 처리구에서 에탄올 생산성이 높았다.