Laser cutting has many advantages, including high-speed cutting potential, no reaction forces, narrow kerf widths, ease of remote control, and more. This makes it the next generation cutting technology for nuclear decommissioning. For this reason, various groups in countries with nuclear power plants have been working on applying laser cutting to nuclear decommissioning. Our group has also been developing in-air and underwater laser cutting technologies. Previous research has focused on efficiently cutting thicker steels. To accomplish this, a cutting head with a long focusing element with a focal length of 600 mm was utilized. A long focusing head is advantageous for cutting thick objects at high speeds because it can maintain a high power density over a long distance. However, with such a long focused beam, the residual laser power that remains after passing through the target object can cut or damage other unwanted objects located behind the target. Utilizing a short focused element can solve this problem, but if the focal length is too short, the cutting capability will be reduced. In this work, we developed and applied a cutting head that utilizes a focused element with a short focal length of 300 mm. Cutting tests with this head allowed us to cut 10-60 mm thick stainless steel plates at a laser power of 6 kW. We also obtained the maximum cutting speed and kerf width for each thickness while increasing the laser power by 1 kW from 1 to 6 kW. The results obtained in this work are expected to be utilized for safe cutting in future nuclear decommissioning applications.

This study presents a rapid and quantitative radiochemical separation method for Nb isotopes in radioactive waste samples from the nuclear power plant with anion exchange resin after Fe coprecipitation. After radionuclides were leached from the radioactive waste samples with concentrated HCl and HNO3, the Nb isotopes were coprecipitated with Fe after filtering the leaching solution with 0.45 micron HA filter, while the Sr, Tc and Ni isotopes were in the solution. The Nb isotopes were separated in HCl medium with anion exchange resin. The purified Nb isotopes were measured using a low level liquid scintillation counter after installing quenching curve with standard Nb-94 isotopes. The separation method for Nb isotopes investigated in this study was applied to neutron dosimeter samples from the nuclear power plant after validating the Nb activity concentration with gamma spectrometry system.

본 연구는 천연물 황련, 관중, 치자의 추출물이 절화수명연 장제로서의 기능을 알아보기 위해 수행 되었다. 선행연구로 선발된 추출물의 용액은 황련, 관중, 치자의 농도가 각각 75mg·L-1, 75mg·L-1, 25mg·L-1로 처리구별로 총 용량은 300mL으로 설정하였으며 대조구는 시판되고 있는 절화수명연 장제 Chrysal과 Floralife를 사용했다. 절화수명이 가장 길었던 처리구는 관중, 치자 단용 처리구로 각각 20.5, 20.5일이었으 며 대조구 중에서 절화수명이 길었던 Floralife 보다 1.7일 긴 효과를 보였다. 가장 높은 생체중 변화율은 Floralife에서 13.8% 까지 증가하였다. 절화수명이 가장 길었던 처리구인 관중, 치자 단용처리구는 생체중 변화율은 크게 증가하지 않았으나 흡수율 변화에서 16일 이후 2mL 이상을 유지하였다. 화경의 경우는 관중 단용처리구가 Floralife보다 6.3% 더 증가하는 결과를 보여줬다. 특히 Floralife는 절화수명과 생체중 변화량이 높은 것에 반하여 꽃잎의 황화현상이 나타났는데, 천연물에서는 이런 현상을 보이는 처리구는 없었다. 종합적으로 황련, 관중, 치자 추출물은 시판되는 절화수명연장제 Chrysal과 Floralife 와 비견되는 효과를 나타냈다. 이로써 황련, 관중, 치자 추출 물은 절화수명연장로서 가능성을 보여줬음을 알 수 있었다.

For application in nuclear decommissioning, underwater laser cutting studies were conducted on thick stainless-steel plates for various cutting directions using a 6 kW fiber laser. For cutting along the horizontal direction with horizontal laser irradiation, the maximum cutting speed was 110 mm∙min−1 for a 48 mm thick stainless-steel plate. For cutting along the vertical direction with horizontal laser irradiation, a maximum speed of 120 mm∙min−1 was obtained for the same thickness, which confirmed that the cutting performance was similar but slightly better. Moreover, when cutting with vertically downward laser irradiation, the maximum cutting speed was 120 mm∙min−1 for a plate of the same thickness. Thus, the cutting performance for vertical irradiation was nearly identical to that for horizontal irradiation. In conclusion, it was possible to cut thick stainless-steel plates regardless of the laser irradiation and cutting directions, although the assist gas rose up due to buoyancy. These observations are expected to benefit laser cutting procedures during the actual dismantling of nuclear facilities.

Enterotoxigenic Escherichia coli는 신생 및 이유기 돼지 설사의 주요 원인체로서 전세계적으로 양돈산업에 큰 경제적 손실을 끼치고 있다. 그러나 현재 국내에는 이러한 E. coli가 보유하는 다양한 병원성유전자의 분포 및 특성에 대한 정보가 부족한 실정이다. 이에 본 연구에서는 2013년부터 2016년까지 국내 163개 양돈농장에서 이유기 설사증 개체로부터 면봉스왑 샘플을 채취하여 동일 농장의 개체일 경우 5개에서 10개 정도를 혼합한 후, MacConkey agar에 배양하여 최종 API 32E system을 통하여 동정하였다. 분리된 모든 균주에 대해서 3가지의 다른 multiplex PCR을 수행하여 총 13종의 병원성유전자의 분포를 확인하였다. 이를 통하여 총 172개의 최소 한가지 이상의 병원성 유전자를 가지는 E. coli 균주를 확인하였고, 그 결과 병원성 유전자의 분포는 (1) fimbrial adhesins (43.0%): F4 (16.9%), F5 (4.1%), F6 (1.7%), F18 (21.5%), and F41 (3.5%); (2) toxins (90.1%): LT (19.2%), STa (20.9%), STb (25.6%), Stx2e (15.1%), EAST1 (48.3%); and (3) nonfimbrial adhesin (19.6%): EAE (14.0%), AIDA-1 (11.6%) and PAA (8.7%)로 나타났다. 결론적으로 본 연구결과는 국내 양돈농장의 이유기 설사증에 관연하는 E. coli는 다양한 종류의 병원성 유전자를 가지고 있으며 그러한 병원성 유전자의 조합도 매우 다양하게 분포하고 있음을 나타낸다.

Earthworms, especially Eisenia andrei, are cultivated for a variety of purposes including waste disposal and compost production. In this study, bacteria from earthworm gut were cultured and the dominant species identified. Subsequently, we isolated bacteriophages able to lyse the isolated gut bacteria. Two dominant genera of gut bacteria, Aeromonas sp. and Citrobacter sp. were identified by using MALDI-TOF MS analysis and a library was constructed to find lytic phages. Phage EF1 showed lytic activity for C. freundii and two Citrobacter isolates, C. braakii and C. murliniae. These 3 species have similar sensitivities to EF1. Several aspects of the life cycle of EF1 were investigated by using C. freundii under optimal growth conditions. EF1 infects C. freundii with a moderate latent period, approximately 25 min, and a large burst size averaging 5 × 109 per infected cell. Moreover, the antimicrobial activity of EF1 was well maintained under diverse conditions including a broad temperature range of 40°C to 50°C and a wide pH range of 4 to 11. In conclusion, the results indicate that earthworm casting contain a wide range of bacteria species, for which there are various corresponding bacteriophages.