This study presents analytical and experimental approaches to identify packing factors for polydisperse granular materials that maximize structural strength. The findings indicate that structural strength depends not only on the packing density but also on the particle-size distribution. A higher percentage of large particles correlates with greater structural strength, even for packings with identical density values. Therefore, this study proposes that the criterion for optimal packing should prioritize the maximum structural strength instead of the maximum packing density. This criterion is derived from proposed coordination numbers for polydisperse granular materials, which account for both the compaction degree and the proportion of particles of varying sizes. Physical experiments were conducted to measure the densities of packings with different particle-size distributions, and the experimental results were compared with analytical simulations using the discrete-element method. These comparisons indicate qualitative agreement between experimental and analytical data.

The purpose of this study is to explore the applicability of satellite-based synthetic aperture radar (SAR) data combined with pavement management system (PMS) indicators for effective road condition monitoring on mountainous local roads. Field survey data, including the International Roughness Index (IRI) and rutting measurements, were used as the ground truth, whereas Sentinel-1 and COSMO-SkyMed SAR images were processed using the time-series InSAR analysis to detect surface displacement and pavement deformations. In addition, a deep learning framework integrating PMS data and SAR imagery was developed, consisting of a swine transformer and CNN–LSTM networks for the classification and localization of pavement defects. The results demonstrated that X-band SAR backscatter values were correlated with IRI variations and that the proposed hybrid two-stage approach (CNN for surface damage and LSTM for rutting) enhanced the accuracy of defect detection compared with conventional single-model approaches. These findings highlight the potential of combining remote sensing and AI-based analysis with existing PMS datasets to provide a cost-effective and scalable solution for road asset management and maintenance prioritization.

Five spider species from the genus Pholcus Walckenaer, 1805, namely Pholcus geogeum sp. nov., Pholcus hongseong sp. nov., Pholcus gochang sp. nov., Pholcus jeocheon sp. nov., and Pholcus yongin sp. nov., are newly described from Korea. These five new species, which belong to the phungiformes group within the genus, can be distinguished from their congeners by the shape and structure of the genital organs of both males and females. They are found on rock walls and at cave entrances in mountainous and hilly mixed forests. This study provides diagnoses, detailed descriptions, and taxonomic photographs of the newly described species.

The purpose of this study was to develop a more accurate model for predicting the in-situ compressive strength of concrete pavements using Internet-of-Things (IoT)-based sensors and deep-learning techniques. This study aimed to overcome the limitations of traditional methods by accounting for various environmental conditions. Comprehensive environmental and hydration data were collected using IoT sensors to capture variables such as temperature, humidity, wind speed, and curing time. Data preprocessing included the removal of outliers and selection of relevant variables. Various modeling techniques, including regression analysis, classification and regression tree (CART), and artificial neural network (ANN), were applied to predict the heat of hydration and early compressive strength of concrete. The models were evaluated using metrics such as mean absolute error (MAE) to determine their effectiveness. The ANN model demonstrated superior performance, achieving a high prediction accuracy for early-age concrete strength, with an MAE of 0.297 and a predictive accuracy of 99.8%. For heat-of-hydration temperature prediction, the ANN model also outperformed the regression and CART models, exhibiting a lower MAE of 1.395. The analysis highlighted the significant impacts of temperature and curing time on the hydration process and strength development. This study confirmed that AI-based models, particularly ANNs, are highly effective in predicting early-age concrete strength and hydration temperature under varying environmental conditions. The ability of an ANN model to handle non-linear relationships and complex interactions among variables makes it a promising tool for real-time quality control in construction. Future research should explore the integration of additional factors and long-term strength predictions to further enhance the model accuracy.

PURPOSES : This study evaluates the noise reduction effects of various road paving methods and focuses on low-noise pavements as a cost-effective alternative to sound barriers and tunnels. In addition, this study assesses how noise levels vary with vehicle speed across different paving methods. METHODS : An analysis of variance (ANOVA) was conducted to evaluate the noise performance of different paving methods, and this followed by a post-hoc analysis to examine the differences among the paving methods. Another ANOVA was conducted to evaluate the impact of speed on noise performance. This ANOVA was followed by a post hoc analysis to assess differences by speed. Finally, a covariance analysis was conducted, using speed as a covariate, to evaluate the noise reduction effects of the various paving methods. RESULTS : The results of the analyses showed that noise levels follow the order of General ≈ Non-draining > Single-layer ≈ Doublelayer, thus grouping the paving methods into two categories with significant differences in noise performance. In addition, the noise levels increased with speed, except at 70 and 80 km/h. The covariance analysis resulted in a regression coefficient of 0.267 for speed across all paving methods. A post-hoc analysis grouped the paving methods into three distinct categories: General, Non-draining ≈ Single-layer ≈ Double-layer, with notable noise differences between them. CONCLUSIONS : The analysis of noise performance showed that both the paving method and speed significantly affected the noise levels. The covariance analysis, using speed as a covariate, revealed a consistent regression coefficient of 0.267 across all the paving methods. After controlling for speed, noise differences were observed. The General method showed higher noise levels than did the Non-draining, Doublelayer, and Single-layer methods.

본 논문에서는 다양한 기상 조건에서 시인성과 내구성을 향상시키도록 설계된 도로 표시용 UV 경화 코팅 시스템 개발을 위해 수행한 연구의 결과를 나타내었다. 제조된 UV 코팅을 사용해 차선 표시의 재귀반사도와 내마모성을 강화하고 포장가속시험(APT), 휠 트래킹 내구성 테스트 등 다양한 테스트를 통해 성능을 평가하였다. 이 결과를 바탕으로 도로 안전을 위한 야간 시인성 및 미끄럼을 개선하 고자 한다.

본 논문에서는 건설 현장 관리의 과제를 다루고 IoT 기술 활용을 위한 기술 적용에 대해 정리하였다. 도로 포장 장비의 유휴 시간을 모니터링하는 IoT 장치를 설계 및 구현하여 효율적인 장비 관리 시스템을 개발하는 것을 목표한다. 또한, 본 연구에서는 통신방식 선 정, 사용자 친화적인 플랫폼 설계, 데이터 수집 및 분석을 위한 진동센서 기반 IoT 디바이스 개발을 통한 실시간 관리에 중점을 두고 있다. 플랫폼을 통해 공사현황을 실시간으로 모니터링하고 장비 유휴시간을 관리해 효율성을 높일 수 있으며, IoT 디바이스는 90% 이 상의 데이터 정확도를 보장한다. 현장 테스트를 통해 장비 사용 추적 효과가 확인되어 보다 효율적인 건설 관리에 기여하고자 한다.

세계 각국은 온실가스 배출을 줄이기 위하여 활발한 노력을 하고 있다. 한국도 노후화된 석탄발전을 폐지하고 LNG 발전으로 전환하는 정책을 추진하고 있다. 그러나, 한국은 가스터빈 제작 기술이 국산화되지 않아서 해외 제작사로부터 전량 수입하여 설치하고 있다. 따라서, 본 논고에서는 가스터빈 발전산업에 대한 국내·외 환경을 살펴보고, 이를 기반으로 PEST-SWOT-AHP 방법론을 적용하여 한국형 가스터빈 기술개발 및 보급 확대 추진전략을 제안하였다. 연구결과, 한국형 가스터빈 기술개발과 보급 확대 전략은 1) 가스터빈 기술개발 및 사업화 촉진을 위한 발전공기업의 역할 강화, 2) 온실가스 감축을 위한 LNG 발전 비중 확대, 3) 정부의 적극적인 가스터빈 산업 생태계 조성 노력, 4) LNG 발전소 건설에 대한 국민 공감대 형성 등으로 요약할 수 있다.

The present study describes Philodromus paiki sp. nov., which was previously misidentified as P. fuscomarginatus (De Geer, 1778), P. poecilus (Thorell, 1872), and P. spinitarsis Simon, 1895 in Korea, as a new species with diagnosis, detailed descriptions, and taxonomic photographs. Additionally, P. spinitarsis is also described to correct previous misidentifications of Korean records of the species.

PURPOSES : Derive a road pavement design method using Geocells, aim to derive a road pavement design and construction method suitable for the characteristics of the Bangladesh region METHODS : To assess long-term performance during road construction in Southeast Asia using Geocells, field tests and numerical analysis are conducted to verify stability. RESULTS : A total of 12 displacement measurements were conducted during the field tests, confirming an average load of 15.75 kN and an average displacement of 0.542mm. Inverse analysis was performed to obtain the properties of Geocell combined with compacted soil. The numerical analysis results confirmed that the insertion of Geocell provides better stability compared to the case with only compacted soil. CONCLUSIONS : Based on field tests and numerical analysis, a road design plan suitable for the Southeast Asian environment was proposed. A preliminary test section was selected in the Comilla region of Bangladesh, and test construction has been completed. Subsequent evaluations of the structural performance by soil layer in the test construction area will be conducted to develop a Geocell road pavement method, taking into consideration the characteristics of the Bangladesh region.

PURPOSES : This study is aimed to economic analysis of the ferronickel slag pavement method carried out to suggest the necessity of developing ferronickel slag pavement technology. METHODS : A life cycle cost analysis of the application of the Ferronickel Slag pavement method and the cutting + overlay pavement method was performed to compare the economic indicators and greenhouse gas emissions for each pavement method. RESULTS : As a result of the analysis, regardless of the Ferronickel Slag mixing rate, if the common performance of the Ferronickel Slag pavement method is the same or superior to the existing pavement method, it is more economical than the existing pavement method. Furthermore, the lower the maintenance cost of the Ferronickel Slag pavement method, the higher the economic feasibility due to the high Ferronickel Slag mixing rate. Greenhouse gas emissions can be reduced from at least 9% to up to 53% through the application of the Ferronickel Slag pavement method, except for some scenario analysis results. CONCLUSIONS : This study provided that the Ferronickel Slag pavement method was superior to the existing pavement method in terms of economic and environmental aspects. Therefore, it was found that the objective justification of developing road pavement technology using Ferronickel Slag was secured.

PURPOSES : For most local governments, including that of Gangwon-do, the establishment of an organized pavement management system is insufficient, resulting in problems such as inefficient distribution and use of maintenance budgets for deteriorated road pavements. In this study, we aimed to contribute to the establishment of a more reasonable road maintenance strategy by developing a model for predicting the annual international roughness index (IRI) change for national highway asphalt pavements in Gangwon-do based on big data analysis. METHODS : Data on independent and dependent variables used for model development were collected. The collected data were subjected to exploratory data analysis (EDA) and data preprocessing. Independent variable candidates were selected to reduce multicollinearity through correlation analysis and specific conditions. A final model was selected, and sensitivity analysis was performed. RESULTS : The final model that predicts annual IRI change uses independent variables such as annual temperature range, minimum temperature, freeze-thaw days, IRI, surface distress (SD), and freezing days. The sensitivity analysis confirmed that the annual IRI change was affected in the order of annual temperature range, minimum temperature, freeze-thaw days, IRI, SD, and freezing days. CONCLUSIONS : Road maintenance can be performed rationally by predicting future pavement conditions using the model developed in this study. The accuracy of the prediction model can be improved if additional data, such as material properties and pavement thickness, are obtained in future studies.

A male Spheropistha melanosoma Yaginuma, 1957 from Korea in the family Theridiidae Sundevall, 1833 is described with measurements and morphological photos of the diagnostic characteristics. This species was collected with a sweep net around arable lands in a mountainous mixed forest during the investigation of spider fauna on Ulleungdo Island in 2019.

PURPOSES : Local governments in Korea, including Incheon city, have introduced the pavement management system (PMS). However, the verification of the repair time and repair section of roads remains difficult owing to the non-existence of a systematic data acquisition system. Therefore, data refinement is performed using various techniques when analyzing statistical data in diverse fields. In this study, clustering is used to analyze PMS data, and correlation analysis is conducted between pavement performance and influencing factors. METHODS : First, the clustering type was selected. The representative clustering types include K-means, mean shift, and density-based spatial clustering of applications with noise (DBSCAN). In this study, data purification was performed using DBSCAN for clustering. Because of the difficulty in determining a threshold for high-dimensional data, multiple clustering, which is a type of DBSCAN, was applied, and the number of clustering was set up to two. Clustering for the surface distress (SD), rut depth (RD), and international roughness index (IRI) was performed twice using the number of frost days, the highest temperature, and the average temperature, respectively. RESULTS : The clustering result shows that the correlation between the SD and number of frost days improved significantly. The correlation between the maximum temperature factor and precipitation factor, which does not indicate multicollinearity, improved. Meanwhile, the correlation between the RD and highest temperature improved significantly. The correlation between the minimum temperature factor and precipitation factor, which does not exhibit multicollinearity, improved considerably. The correlation between the IRI and average temperature improved as well. The correlation between the low- and high-temperature precipitation factors, which does not indicate multicollinearity, improved. CONCLUSIONS : The result confirms the possibility of applying clustering to refine PMS data and that the correlation among the pavement performance factors improved. However, when applying clustering to PMS data refinement, the limitations must be identified and addressed. Furthermore, clustering may be applicable to the purification of PMS data using AI.

PURPOSES : The purpose of this study is to confirm the thermal expansion characteristics of concrete mixed with 1% waste glass fine aggregates, which is the amount stipulated for recycled aggregates in the current quality standard. METHODS : The coefficient of thermal expansion was measured by applying AASHTOT 336-10 using a LVDT. The results measured were used as physical properties in a finite element analysis to confirm the change in tensile stress and the displacement of the right angle section of the upper slab of a concrete pavement due to admixture substitution. RESULTS : The thermal expansion coefficients of concrete based on the replacement rate of the admixture when the waste glass fine aggregates are replaced are within the range of the thermal expansion coefficients of concrete specified in the Federal Highway Administration report. As the replacement rate of the admixture increases, the thermal expansion coefficient of concrete decreases. As the thermal expansion coefficient decreases, the slab pavement curling displacement and the tensile stress of the center of the upper slab of concrete decrease. CONCLUSIONS : In the short term, the presence or absence of waste glass fine aggregates does not significantly affect the thermal expansion coefficient of concrete. However, in the long term, waste glass fine aggregates are reactive aggregates that causes ASR, which creates an expandable gel around the aggregates and results in concrete expansion. Therefore, the relationship between ASR and the thermal expansion coefficient must be analyzed in future studies.

PURPOSES : In this study, surface distress (SD), rutting depth (RD), and international roughness index (IRI) prediction models are developed based on the zones of Incheon and road classes using regression analysis. Regression analysis is conducted based on a correlation analysis between the pavement performance and influencing factors. METHODS : First, Incheon was categorized by zone such as industrial, port, and residential areas, and the roads were categorized into major and sub-major roads. A weather station triangle network for Incheon was developed using the Delaunay triangulation based on the position of the weather station to match the road sections in Incheon and environmental factors. The influencing factors of the road sections were matched Based on the developed triangular network. Meanwhile, based on the matched influencing factors, a model of the current performance of the road pavement in Incheon was developed by performing multiple regression analysis. Sensitivity analysis was conducted using the developed model to determine the influencing factor that affected each performance factor the most significantly. RESULTS : For the SD model, frost days, daily temperature range, rainy days, tropical nights, and minimum temperatures are used as independent variables. Meanwhile, the truck ratio, freeze–thaw days, precipitation days, annual temperature range, and average temperatures are used for the RD model. For the IRI model, the maximum temperature, freeze–thaw days, average temperature, annual precipitation, and wet days are used. Results from the sensitivity analysis show that frost days for the SD model, precipitation days and freeze–thaw days for the RD model, and wet days for the IRI model impose the most significant effects. CONCLUSIONS : We developed a road pavement performance prediction model using multiple regression analysis based on zones in Incheon and road classes. The developed model allows the influencing factors and circumstances to be predicted, thus facilitating road management.