For surface hardening of a continuous casting mold component, a fundamental metallurgical investigation on dissimilar laser clads (Cu–NiCrBSi) is performed. In particular, variation behavior of microstructures and mechanical properties (hardness and wear resistance) of dissimilar clads during long-term service is clarified by performing high-temperature postclad heat treatment (temperature range: 500 ~ 1,000 ℃ and isothermal holding time: 20 ~ 500 min). The microstructures of clad metals (as-clads) consist of fine dendrite morphologies and severe microsegregations of the alloying elements (Cr and Si); substrate material (Cu) is clearly confirmed. During the post-clad heat treatment, the microsegregations are totally homogenized, and secondary phases (Cr-based borides and carbides) precipitated during the short-term heat treatment are also almost dissolved, especially at the heat treatment conditions of 950 ℃ for 500 min. Owing to these microstructural homogenization behaviors, an opposite tendency of the surface mechanical properties can be confirmed. In other words, the wear resistance (wear rate) improves from 4.1 × 10−2 mm3/Nm (as-clad condition) to 1.4 × 10-2 mm3/Nm (heat-treated at 950 ℃ for 500 min), whereas the hardness decreases from 453 HV (as-clad condition) to 142 HV (heat-treated at 950 ℃ for 500 min).

Rats are an important laboratory animal for biomedical research. Though rats have some physiology and genetic similarities to human, several technical issues such as delicate in vitro culture system and low survival rate after pronuclear microinjection have hindered the development of transgenic rat generation. Accordingly, in this study, to produce transgenic rat, we established transposon-mediated insertional mutagenesis by cytoplasmic microinjection. The sleeping beauty transposon (SB) and SB-transposase recognize the precise genome integration into a TA nucleotide by ‘cut-and-paste’ mechanism. It mediates stable integration and reliable long-term expression. DNA, 0.4ng/ul SB vector (IR/DR-EF1a-eGFP-2A-IL2-pA-IR/DR) and mRNA, 5ng/ul SB-transposase were injected to 1-cell stage embryo and one transgenic rat was generated after full-term gestation. To confirm the genome insertion, GFP was detected by PCR. Further, this method was applied to generate transgenic rats producing Cas9 protein. DNA, 0.4ng/ul SB vector (IR/DR-CAG-Cas9-2A-eGFP-pA-IR/DR) and mRNA, 5ng/ul SB-transposase were injected to 1-cell stage embryo. Some of the in vitro cultured embryos showed GFP positive at blastocyst stage and Cas9 sequence was detected by PCR. One stillbirth pup was born to date and genome PCR on Cas9 was positive. In summary, the SB transposon system could be a highly effective method that contribute to the production of transgenic rats. If the protocols will be optimized, we successfully generated efficiently transgenic rats for human models by SB system. This work was supported by BK21 PLUS Program for Creative Veterinary Science, the National Research Foundation of Korea (2017R1A2B3004972) and the Technology Development Program (S2566872) by MSS.

Interferon tau (IFNT), has known as a key signal molecule for a period of pregnancy in ruminants owing to the need on maternal recognition of pregnancy. It is generated in trophectoderm cells of the elongation bovine conceptus at day 13-21 and a peak output is at day 15-17 of pregnancy period. Moreover, other studies indicated that it can be effective in the embryonic development and quality. In previous study, there were 8 bovine IFNT, but only 2 forms of IFNTs, IFNT2 and IFN-tau-c1, were expressed by the conceptuses during the peri-implantation. In this study, we target the one between the two, IFN-tau-c1 and then the effect of IFNT knockout in donor cells to bovine cloned embryonic development by somatic cell nuclear transfer (SCNT) was investigated. In order to proceed this study, the immature oocytes from the ovaries at local slaughterhouse have been matured in vitro for 22 hours. For preparing the donor cell that have a mutation on IFNT gene, somatic cells were transiently transfected with Cas9 protein and single guide RNA targeting IFNT, and various single derived colonies with high proliferation were isolated and confirm the mutation by PCR. Finally, one colony had mono-allelic mutation (4bps deletion) was picked out and applied as the donor cell to SCNT. A donor cell was injected into an oocyte that nucleus was removed. Reconstructed oocytes with the donor cell were fused by electrical shock, activated by chemical stimulation and cultured for 7 days in chemically defined medium. In this study, control (n=199) and IFNT knockout-group (n=219) were compared with four replications. As results, there was no significant difference between control-and IFNT-knockout group not only in cleavage rate, but also blastocyst formation rate (Control: 12.3% ± 9.2, IFNT knockout-group: 20.1 ± 11%). In addition, the number of blastocyst cell was not different between control (91.7 ± 26.2) and IFNT knockout group (83.5 ± 21.3). Some IFNT mutated blastocysts from SCNT were randomly selected for confirmation of the deletion of IFNT and all samples were positive for mutation. In conclusion, these data indicated that the interruption of IFNT did not influence the embryonic development. In future study, we will transfer these mutated embryos toto test the effect of IFNT for pregnancy period. This work was supported by BK21 PLUS Program for Creative Veterinary Science, the National Research Foundation of Korea (2017R1A2B3004972) and the Technology Development Program (S2566872) by MSS.

This study investigated the effects of the post annealing temperatures on the electrical and interfacial properties of a metal-semiconductor-metal photodetector(MSM-PD) device. The interdigitate type MSM-PD devices had the structure Al(500 nm) / Ti(200 nm) / poly-Si(500 nm). Structural analyses of the MSM-PD devices were performed by employing X-ray diffraction(XRD), scanning electron microscopy(SEM) and transmission electron microscope(TEM). Electrical characteristics of the MSM-PD were also examined using current-voltage(I-V) measurements. The optimal post annealing condition for the Schottky contact of MSM-PD devices are 350℃-30minutes. However, as the annealing temperature and time are increased, electrical characteristics of MSM-PD device are degraded. Especially, for the annealing conditions of 400℃-180minutes and 500℃-30minutes, the I-V measurement itself was impossible. These results are closely related to the solid phase reactions at the interface of MSM-PD device, which result in the formation of intermetallic compounds such as Al3Ti and Ti7Al5Si12.

Boron-doped diamond (BDD) electrode has an extremely wide potential window in aqueous and non-aqueous electrolytes, very low and stable background current and high resistance to surface fouling due to weak adsorption. These features endow the BDD electrode with potentially wide electrochemical applications, in such areas as wastewater treatment, electrosynthesis and electrochemical sensors. In this study, the characteristics of the BDD electrode were examined by scanning electron microscopy (SEM) and evaluated by accelerated life test. The effects of manufacturing conditions on the BDD electrode were determined and remedies for negative effects were noted in order to improve the electrode lifetime in wastewater treatment. The lifetime of the BDD electrode was influenced by manufacturing conditions, such as surface roughness, seeding method and rate of introduction of gases into the reaction chamber. The results of this study showed that BDD electrodes manufactured using sanding media of different sizes resulted in the most effective electrode lifetime when the particle size of alumina used was from 75~106 μm (#150). Ultrasonic treatment was found to be more effective than polishing treatment in the test of seeding processes. In addition to this, BDD electrodes manufactured by introducing gases at different rates resulted in the most effective electrode lifetime when the introduced gas had a composition of hydrogen gas 94.5 vol.% carbon source gas 1.6 vol.% and boron source gas 3.9 vol.%.

This study was carried out to identify the optimum seeding dates for selecting a double-cropping system and to assess the effect of polyethylene film mulching on the yield of Proso millet. Seeds of the varieties Hwanggeumgijang and Ibaegchal were sown in Miryang on five different dates: 1st (May 25), 2nd (June 15), 3rd (June 25), 4th (July 5), and 5th (July 15), with and without polyvinyl mulching. The varieties have different characteristics, for example, Hwanggeumgijang is an early-maturing type and more sensitive to temperature, whereas Ibaegchal is a medium-maturing type and more sensitive to the duration for which it is exposed to sunlight. Late-sown Hwanggeumgijang had a short heading date from seeding and required a low accumulated temperature. It also had a shorter period of heading, a shorter culm length and a shorter diameter of stem. In contrast, it had had a higher number of ears per m2 although similar ear length and similar 1000-grain weight. The yield potential of Hwanggeumgijang was found to decrease at a late seeding date. In particular, it significantly decreased at the seeding date of July 15. In the case of cultivation with polyvinyl mulching, the period of heading was shorter by 2–4 days and the yield potential was increased by approximately 12–32%. The length and diameter of culm in Ibaegchal were slowly decreased, but the length of ear, the 1000-grain weight and the yield potential were similar for all seeding dates (except July 15) and cultivation with and without mulching. When sown late, the length and diameter of the culm of Ibaegchal very rapidly decreased by the July 15 seeding date. The protein content of Ibaegchal was higher but the amlyose content of Ibaechal was lower compared to Hwanggeumgijang. At late seeding dates, the protein contents of the two varieties increased but the amylose contents were similar.

The preaent study was conducted to investigate the effect of mixed seeding of three wheat variwties, ‘Anzunbaengimil’, ‘Jokyoung’, and ‘Sooan’, on agricultural characteristics and quality of plants to select the most suitable mixed seeding ratio. We observed that the yield of plants obtained from the mixed seeding combinations was higher than those obtained from single seeding of the three varieties. The yield was high, especially for the combinations ‘Sooan’ and ‘Anzunbaengimil’ (80 and 20%, respectively) and ‘Sooan’ and ‘Jokyoung’ (90 and 10%, respectively). The protein content of the seedlings obtained from the above two combinations was higher than in the seedling of ‘Sooan’. Based on our results, we suggest that mixed seeding of wheat varieties is more effective than single seeding in improving the yield and quality of plants obtained from mixed seeding.