In this study, epoxy composites were reinforced with multi-walled carbon nanotubes and fused silica particles, dispersing the fillers within the epoxy resin based on a simple physical method using only shear mixing and ultrasonication. The hybrid composite specimens with 0.6 wt% of carbon nanotubes and 50 wt% of silica particles showed improved mechanical properties, with increase in tensile strength and Young’s modulus up to 12 and 37%, respectively, with respect to those of the baseline specimens. The experimental results showed that the low thermal expansion of the silica particles improved the thermal stability of the composites compared with that of the baseline specimen, whereas the thermal expansion slightly increased, due to the increased heat transfer from the exterior to the interior of specimens by the carbon nanotube filler. The coefficient of thermal expansion of the hybrid composite specimen reinforced with 0.6 wt% of carbon nanotubes and 50 wt% of silica particles was decreased by 25%, and the thermal conductivity was increased by about 84%, compared with those of the baseline specimen.

This study describes results on sexual maturation and characteristics of natural spawned eggs to develop a method for the production of stable, healthy fertilized eggs from captive-reared yellowtail kingfish, Seriola lalandi. A total of 59 yellowtail kingfish were captured off the coast of Jeju Island, after which the broodstock was cultured in indoor culture tank (100 m3) until they were 6.1–14.9 kg in body weight. As part of the rearing management for induced sex maturation, the intensity of illumination was maintained at 130 lux. The photoperiod (light/dark; L/D) was set to a 12 L/12 D from October 2013 to January 2014, and 15 L/9 D from February 2014 to June 2014. Feeds comprised mainly EP (Extruded Pellets), with squid cuttlefish added for improvement of egg quality, and was given from April to June 2014. The first spawning of yellowtail kingfish occurred in May 3, 2014, at a water temperature of 17.0°C. Spawning continued until June 12, 2014, with the water temperature set at 20.5°C. Time of spawning was 26 times at this period. The total number of eggs that spawned during the spawning period was 4,449×103. The buoyant rate of spawning eggs and fertilization rate of buoyant eggs during the spawned period were 76.1% and 100%, respectively. The diameters of the egg and oil globule were 1.388 ± 0.041 mm and 0.378 ± 0.029 mm, respectively, which was higher in early eggs than in those from late during the spawned period.

‘Taegang’ is a new six-rowed covered barley cultivar developed by the National Institute of Crop Science (NICS), R.D.A. This cultivar is developed from a cross between ‘Suwon287’ and ‘Olbori’ in 1992. An F8 selection was made at NCES in 2000 and it was te

“Jaeanchal” is a new six-rowed, naked and waxy barley cultivar developed by National Crop Experiment Station (NCES), RDA in 2001. This cultivar was derived from a cross between “Suwon261” and “SB881115-6” in 1989. The final selection was made at NCES in 1

A new two-rowed naked waxy barley cultivar, 'Pungsanchal', was developed for split polished grains by the National Crop Experiment Station(NCES), RDA in 2001. This cultivar was derived f rom a cross between 'SB901258GG-B' and 'Suwon212' in 1991. The f ina