In this study the characteristics of wind pressure that are depending on the open type of retractable dome roof were analyzed according to the wind pressure coefficient and wind pressure spectrum. The analysis results showed that the open type and shape of the roof both had a significant impact on the wind pressure changing. In case of the edge to center open type, the wind pressure has not changed much because of the complex turbulence of flow and open area. On the other hand, in case of the center to edge open type, it has confirmed that wind pressure increases due to the separation of flow in windward and open area.

The fluctuating wind pressure of the low rise ratio(f/D=0.1) for the elliptical dome roof was analyzed to compare it with the previous studies of circular dome roofs. Wind tunnel test were conducted on a total of 10 wind directions from 0° to 90° while changing wall height-span ratios(H/D=0.1-0.5). For this, meanCP, rmsCP and wind pressure spectrum were analyzed. The analysis result leads to find differences in the shape of the spectra in the spanwise direction and leeward of the elliptical dome according to the wind direction variations of the elliptical dome roof.

Wind tunnel tests were conducted to analyze the wind fluctuating pressures on a circular closed and open dome roof with a low span rise. Two dome models with various geometric parameters (height/span ratios and open ratios) were used for fixed span rise ratio dome and wind pressure spectrum were analyzed. The applicability was examined in comparison with the spectral model proposed in the previous studies. The analysis results show that the wind pressure spectrum of open dome roof tends to increase power in the high frequency range and the second peak is found in the area different from the closed dome roof. In addition, according to the comparison analysis with the previous proposed spectral model, it was found that it is not applicable to the closed and open dome roofs with low rise ratio due to the different peak frequencies.

In this paper, the mean and fluctuating pressure coefficients derived from the results of wind tunnel tests on closed and open dome roofs were analyzed. The distribution characteristics of the fluctuating pressure according to the opening ratio and the height change were discussed. The analysis results showed that when the roof is open, the overall wind pressure decreases due to the open space, but more fluctuation occurred than the closed dome roof.

This study investigates the wind pressure characteristics of elliptical plan retractable dome roof. Wind tunnel experiments were performed on spherical dome roofs with varying wall height-span ratios (0.1~0.5) and opening ratios (0%, 10%, 30% and 50%), similar to previous studies of cirular dome roofs. In previous study, wind pressure coefficients for open dome roofs have been proposed since there are no wind load criteria for open roofs. However, in the case of Eeliptical plan retractable dome roof, the wind pressure coefficient may be largely different due to the presence of the longitudinal direction and transverse direction. The analysis results leads to the exceeding of maximum and minimum wind pressure coefficients KBC2016 code.

Wireless sensors are more favorable in measuring structural response compared to conventional sensors in terms of them being easier to use with no issues with cables and them being considerably cheaper. Previous tests have been conducted to analyze the performance of MEMS (Micro Electro Mechanical Systems) sensor in sinusoidal excitation tests. This paper analyzes the performance of in-built MEMS sensors in devices by comparing with an ICP sensor as the reference. Earthquake input amplitude excitation in shaking table tests was done. Results show that MEMS sensors are more accurate in measuring higher input amplitude measurements which range from 100gal to 250gal than at lower input amplitudes which range from 10gal to 50gal. This confirms the results obtained in previous sinusoidal tests. It was also seen that natural frequency results have lower error values which range from 0% to 3.92% in comparison to the response spectra results. This also confirms that in-built MEMS sensors in mobile devices are good at estimating natural frequency of structures. In addition, it was also seen that earthquake input amplitudes with more frequency contents (Gyeongju) had considerably higher error values than Pohang excitation tests which has less frequency contents.

Micro-Electro-Mechanical Systems (MEMS) sensors have been widely used in Structural Health Monitoring due to their convenience and lower costs in comparison to conventional sensors. Triggered measurements are relevant in events such as earthquakes because unlike continuous measurements, they only record the structural response once an event happens. This is more cost effective and it makes the data more manageable because only the required measurements from the event are recorded. The most common method of triggering is amplitude triggering. However, lower input amplitudes (less than 0.1g) cannot be triggered by using this method. In this paper, sound triggering was introduced to allow triggered measurements for lower input amplitude values. The performance of the sound triggering and amplitude triggering were compared by a series of shaking- table tests. It was seen that sound- triggering method has a wider frequency (0.5~10Hz) and amplitude (0.01~1.0g) range of measurements. In addition, the sound triggering method performs better than the amplitude triggering method at lower amplitudes. The performance of the amplitude triggering, in terms of the triggering being simultaneous improves at higher input amplitudes.

Recently, measuring instruments for SHM of structures has been developed. In general, the wireless transmission of sensor signals, compared to its wired counterpart, is preferable due to the absence of triboelectric noise and elimination of the requirement of a cumbersome cable. However, the low-cost wireless MEMS sensor has high noise density and transmits the signal wirelessly, so data transmission delay occurs during measurement. Therefore, the footbridges that was previously measured by a mobile phone in 2014 was remeasured using G-Link-200, iPad and iPhone to compare their performance.

Wireless sensors are more favorable in measuring structural response compared to conventional sensors. This is because they are easier to use with no issues with cables and are considerably cheaper. There are several applications that can be used in recording and analyzing data from MEMS sensor installed on an iPhone. The Vibration App is one of the applications used and there has not been adequate research conducted in analyzing the performance of this App. This paper analyzed the performance of the Vibration App by comparing it with the performance of an ICP sensor. Results show that natural frequency results are more accurate (error less than 5%) in comparison to the amplitude results. This means that built- in MEMS sensor in smartphones are good at estimating natural frequency of structures. In addition, it was seen that the results became more accurate at higher frequencies (5.0Hz and 10.0Hz).

With the recent trend to construct high-rise and large buildings, the steel structure system is widely used, but there are not enough studies on the vibration characteristics of the iFLASH system on the buildings. Therefore, in this study, we performed a vibration measurement of the natural frequency and damping ratio in the stage of iFLASH panel, composit, frame completion and cladding completion. The result findings suggest that the damping ratio after the cladding completion has a greater effect on the reduction of the damping ratio, than the stage after the frame completion.

The mites of the superfamily Eriophyoidea are of worldwide distribution, and invariably associated with plants. They are extremely small in size with average 200 ㎛ of adult body length ranging from 80 to 500 ㎛, and thus often invisible to the naked eyes without noticeable deformation and/or injury on the host plants. Their general appearance is rather worm-like, with an elongated and transversely annulated opisthosoma, and with only 2 pairs of legs having a empodial featherclaw instead of paired true claws. The extremely small size and secret habits of eriophyoid mites cause them to be ignored or overlooked, and make them little understood and appreciated, although they are obligatory plant feeding mites being distributed in most botanical biosphere of the world. Nevertheless, some species are of considerable economic significance as the tomato russet mite (Aculops lycopersici), Citrus rust mite (Aculops pelekassi), pear leaf rust mite (Phyllocoptes pyrivagrans), Castanopsis witches’ broom mite (Aceria kadonoi), Retusa fringe tree malformation mite (Aceria sp.) calls for a greater awareness of them in Korea. Besides, the eriophyoid mites from ornamental trees get to known to public, since the trees are planted along a street. Information on eriophyoid mites in Korea is often difficult to obtain. This was mainly due to the lack of taxonomic works done in Korea. Furthermore, some records on eriophyoid mites are not taxonomically based but just adopted neighboring countries’ records. Their original descriptions are frequently inadequate with focusing on the ecological aspects rather than taxonomic ones. So, some species including Aceria species from Lycium chinensis, in the light of recent knowledge of eriophyoid taxonomy, should be renamed and reclassified. Until now, more than 38 species in 17 genera of the family Eriophyidae have been reported in Korea, which is still relatively small number compared with those in neighboring countries; China (197 spp., in 60 gen), Japan (47 spp., in 19 gen), and Taiwan (75 spp., in 41 gen). Furthermore, none of the other families (Phytoptidae and Diptilomiopidae) have known yet. There is little doubt that more species await discovery in Korea. Considering the geographic distribution patterns, only 7 species among 38 species of Korean eriophyids are endemic. A total of 23 Korean eriophyid species are shared with Japan, 12 species with China, 5 species with Taiwan, 7 species with Russia, and 19 species with USA. It shows that the Korean eriophyid fauna seems to be similar to the Japanese fauna zoogeographically, and more cooperation between Japanese and Korean taxonomists is continuously needed in the eriophyoid field. On the other hand, more endemic and taxonomically important species are expected to be found in the Korean peninsular, since the eriophyoid mites is highly host specific and Korean peninsular is one of the most interesting areas with intense speciation processes. The upland and mountainous landscape (constituting 80% of the peninsula) favours the existence of multiple isolated habitats. The Korean peninsula is characterised by a high level of endemism among the species of higher vascular plants. Out of 2,898 plant species 407 are endemics (14%), including 224 endemic species in the southern and 107 endemic species in the northern part of the peninsula.

Accurate analysis of nuclear status is needed when biopsied-blastomeres are used for embryo sexing. In this study, the nuclear status of blastomeres derived from 8- to 16-cell stage IVF bovine embryos was analyzed to evaluate the representative of single blastomere for embryo sexing. When 55 embryos were analyzed by PCR following biopsy, the coincident rate of sex determination between biopsied-single blastomere and matched blastocyst by PCR was 80 %. Karyotyping of biastomeres in 8- 16-cell stage bovine embryos was conducted to assess chromosome status of IVF embryos. To establish karyotyping of blastomeres, concentrations of vinblastine sulfate and duration of exposure time for metaphase plate induction with 8- to 16-cell stage bovine embryos were tested. The most effective condition for induction of metaphase plate (>45%) was 1.0 ug/ml vinblastine sulfate treatment for 15 h. In 22 embryos under the condition, only 8 embryos out of ten that had a normal diploid chromosome complement showed a sex-chromosomal composition of XX or XY (36.4%) and 2 diploid embryos showed mosaicism of the opposite sex of XX and XY in blastomeres of embryo (9.1%). One haploid embryo contained only one X-chromosome (4.5%). Four out of the other 11 embryos having a mixoploid chromosomal complement contained haploid blastomere with wrong sex chromosome (18.2%). These results suggested that morphologically normal bovine embryos derived from IVF had considerable proportion of mixoploid and sex-chromosomal mosaicism which could be the cause of discrepancies of the sex between biopsied-single blastomere and matched blastocyst by PCR analysis.

Soybean can produce high-N residue due to N-fixation, so soybean rotation may increase yield of subsequent corn and reduce N fertilizer on the corn fairly. To find out the contribution of nitrogen to subsequent corn following soybean cultivation, soil nitrate, corn yield, and nitrogen uptake were measured for three continuous corn cropping years after soybean rotation. Three N rates of 0, 80, and 160 kg/ha were applied to three continuous corn following soybean cropping. At 6-leaf stage, soil nitrate amount at the soil depth of 0-30cm ranged from 60 to 80 kgN/ha higher in the first corn cropping year than that in the second and third corn cropping years. Judging from corn N status such as SPAD value, N concentration of ear-leaf and stover at silking stage, N contribution of previous soybean to corn in the first corn year was N fertilizer of approximately 80 kg N/ha. Stover N uptake at silking stage increased from 47 to 52 kg N/ha at the 0, and 80 kg N/ha of N rates in the first corn cropping year compared with those in the second and third corn cropping years. Corn grain yield at the 0 kg N/ha of N rate was 6-7 ton/ha higher in the first corn cropping year than that in the second and third corn cropping years, respectively. When compared the first corn year following soybean cropping with the second and third corn cropping years, N uptake of grain and stover at harvest with low N rates such as 0 and 80 kg N/ha increased from 45 to 67kg N/ha, from 35 to 60 kg N/ha, respectively. N uptake of whole plant by soybean rotation increased from 93 to 118 kg N/ha in the first year compared with that in the second and third corn cropping years. However, the N contribution by soybean cropping was small in the second and third continuous corn cropping years. Therefore, it was concluded that the nitrogen fertilizer of 80-100 kg N/ha in the first corn cropping year could be saved by soybean rotation and annual alternative corn-soybean rotation could be the best rotation system

Winter green manure crops including legume increase grain yield of subsequent crop and substitute N fertilizer requirement with organic-No Hairy vetch grows vigorously and can provide N-rich green manure for corn with its soil incorporation after wintering. But, grain yield of corn as succeeding crop would be reduced if its planting time is delayed until late spring. This experiment was carried out to find the proper incorporation time of hairy vetch green manure and planting time of subsequent corn in cropping system with winter hairy vetch(green manure)-summer corn. Hairy vetch was incorporated into soil at a ten-day interval between April 10 and May 10 and corn was planted at 5 days after each hairy vetch incorporation. Soil nitrate concentration on April 10 and 20 in hairy vetch plot was slightly lower than that at winter fallow. Above-ground dry matter and organic-N of hairy vetch increased linearly with delayed hairy vetch incorporation time from April 10 to May 10. Average dry matter and organic-N produced by hairy vetch were 5.7 ton/ha and 248 kgN/ha, respectively. Corn growth and yield decreased as delayed corn planting time after May in spite of increasing dry matter and N-yield of hairy vetch. Nitrogen concentration of corn grain, stalk and whole plant at harvest were the highest in May 5 planting, but total N-uptake of May 5 planting were not different from that of April 25 planting because of lower grain yield. It was concluded that the proper incorporation time of hairy vetch and corn planting time were April 20 and April 25, respectively, because grain yield was the highest and corn could use hairy vetch-N effectively to produce dry matter.