The ability to both assay the presence of, and to selectively remove ions in a solution is an important tool for waste water treatment in many industrial sectors, especially the nuclear industry. Nuclear waste streams contain high concentrations of heavy metals ions and radionuclides, which are extremely toxic and harmful to the environment, wildlife and humans. For the UK nuclear industry alone, it is estimated that there will be 4.9 million metric tonnes of radioactive waste by 2125, which contains a significant number of toxic radionuclides and heavy metals. This is exacerbated further by increased international growth of nuclear new build and decommissioning. Efforts to remove radionuclides have been focused on the development and optimisation of current separation and sequestering techniques as well as new technologies. Due to the large volumes of waste the techniques must be economical, simple to use and highly efficient in application. Magnetic nanoparticles (MNPs) offer a powerful enhancement of normal ion exchange materials in that they can be navigated to specific places using external magnetic fields and hence can be used to investigate challenges such as, pipework in preparation of decommissioning projects. They also have the potential to be fine-tuned to extract a variety of other radionuclides and toxic heavy metals. It has been demonstrated that with the right functional groups these particles become very strongly selective to radionuclides, such as Uranium. However, this new technology also has the potential to effectively aid nuclear waste remediation at a low cost for the separation of both radionuclides and heavy metals. In this work, we investigate the origin of the selectivity of superparamagnetic iron oxide nanoparticles (SPIONs) to Uranium by making systematic changes to the existing surface chemistry and determining how these changes influence the selectivity. Identifying the mechanism by which selected common nuclear related metals, such as Na(I), K(I), Cs(I), Ca(II), Cu(II), Co(II), Ni(II), Cd(II), Mg(II), Sr(II), Pb(II), Al(III), Mn(II), Eu(III) and Fe(III), are sorbed will allow for specific NP-target (nanoparticle) ion interactions to be revealed. Ultimately this understanding will provide guidance in the design of new targeted NP-ligand constructs for other environmental systems.

The bituminous coal was extracted with different industrial solvents like coal tar (CT), heavy cycle oil (HCO) and with their blends to determine the influence of solvent type on the extract yield, composition, thermal behavior, properties such as solubility to toluene and quinoline. The extracts obtained at 380 °C represented pitch-like solid matter with the softening points of 72–127 °C depending on the solvent used. They were characterized using the elemental and group analysis, FTIR spectroscopy, TG-DTG thermogravimetry and liquid chromatography for benzo(a)pyrene concentration. Also, maltene fractions of some extracts were studied by GC–MS. The results showed coal dissolution and the properties of the extracts to differ greatly depending on the solvent used. Coal tar was more favorable solvent for coal dissolution than HCO. Good correlation between the extract aromaticity and the content of the toluene insolubles was observed. The maltene fractions of the extracts obtained with CT and CT blended with HCO consisted mainly of polycyclic aromatics, and that obtained with the HCO contained also large amount of aliphatic compounds. It was found that the amount of the carcinogenic benzo(a) pyrene (BaP) in the toluene soluble fractions of the extracts were different depending on the solvents used for extraction. The remarkable result was that the BaP concentrations in all extracts were much lower than in the solvents used.

The use of recycled materials, such as the fine recycled aggregate made from concrete waste and carbon fiber (CF) product of industrial waste, for the manufacture of conductive recycled mortars (CRM), transforms the mortar base cement normally made with cement:sand in a sustainable multifunctional material, conferring satisfactory mechanical and electrical properties for non-structural uses. This action provides ecological benefits, reducing the use of natural fine aggregates from rivers and the amount of concrete waste deposited in landfills resulting from construction waste. In this investigation the effect of the addition of CF on electrical properties in hardened, wet and dry state, electric percolation in dry state and fluidity of the wet mixture of a cement based CRM was evaluated: fine recycled aggregate: graphite powder, CRM specimens with dimensions of 4 × 4 × 16 cm. were manufactured for 3, 7 and 28 days of age and sand/cement ratios = 1.00, graphite/cement = 1.00, water/cement = 0.60 and CF = 0.1, 0.3, 0.5, 1.0, 1.5, 2.0, 2.5 and 3.0% compared to the weight of cement. The results demonstrated the effect of the addition of CF in CRM, reducing fluidity of the mixtures due to the opposition generated by its physical interaction of CF with recycled sand or recycled fine aggregate and graphite powder (GP), in its case, placing the electric percolation percolation at 0.30% and 0.45% of CF for CRM with and without GP, respectively. Increases in electrical conductivity (EC) without the presence of GP are defined by the contact between the CF and the conductive paths formed. In contrast, with the presence of GP, the EC is defined by the contact between the CF and the GP simultaneously, forming conductive routes with greater performance in its EC.

Cryopreservation is a widely-used efficient means of long-term sperm preservation. However, unlike other types of semen, cryopreserved boar semen has reduced fertility and the efforts continue to optimize post-thawing sperm recovery. In this study, we evaluated the effects of various washing solutions (Hulsen solution, labmade DPBS and commercial DPBS) on post-thawing porcine sperm kinematics (CASA system), viability (SYBR-14/PI) and acrosome integrity (PSA/FITC). We also examined the effect of washing-centrifugation on frozen-thawed semen kinematics. The results indicate that type of washing solution and post-thawing centrifugation alters parameters linked to sperm quality (total motility, progressive motility, viability and acrosome integrity). Significantly higher (p < 0.05) motility and progressive motility were obtained when cryopreserved semen was processed with Hulsen solution. The postthaw percentage of live and intact acrosomal sperm was significantly higher in group 1 (Hulsen solution) as compared to other groups. Following thawing-centrifugation, the results showed significantly higher motility and progressive motility in group 1 than other groups. However, the latter two DPBS groups did not differ statistically. Taken together, Frozen-thawed spermatozoa motility, acrosome integrity and viability can be affected by the type of washing solution used. Moreover, centrifugation of frozenthawed semen has an unfavorable effect on total motility and progressive motility.

Background/Aim: Endoscopic retrograde cholangiopancreatography (ERCP) training requires varying degrees of staff assistance regarding operation of the fluoroscopy machine via a foot pedal. Efficiency is important to acquire during this training due to radiation risks. In this study, we evaluate the effect of controlling endoscopy and fluoroscopy unit on duct cannulation rates (CRs) and total fluoroscopy time (FT) for fellows in training. Methods: 204 patients undergoing ERCP were randomized to one of two groups: 1) “Endoscopist Driven” group in which the endoscopist controlled the foot pedal for fluoroscopy, and 2) “Assistant Driven” group in which attending or fellow controlled the foot pedal while the other team member controlled the endoscope. Various measures including selective duct CR and total FT were recorded. Results: There was no significant difference in mean procedure duration between the two groups (32 minutes vs. 33 minutes, p=0.70). There was also no statistically significant difference in CR (83.7% vs. 77.4%, p=0.25) or FT (3.27 minutes vs. 3.54 minutes, p=0.48). Conclusions: ERCP is a technically challenging procedure which requires extensive supervision. This study demonstrates that CR and FT are not affected by who controls the fluoroscopy.

Carbon fibers (CF) are predominantly being manufactured from polyacrylonitrile (PAN) based precursors which require solution spinning utilizing health hazardous organic solvent. This also adds to the cost of production due to the investment for the solvent recovery. Study of melt processable precursors has long been sought as a solution for health and environmental problems associated with the use of hazardous solvent. No use of solvent for spinning will also reduce the cost of manufacturing. Our coworker Deng et al. reported the possibility of using acrylonitrile-co-1-vinylimidazole (AN/VIM) copolymer as melt processable CF precursor. Here we report a successful preparation of carbon fiber from the co-polymer. We successfully demonstrated the preparation of thinner precursor fibers and carbon fibers through our optimization study of melt spinning, annealing, stabilization and carbonization.

One- and two-dimensional carbon nanomaterials were tested as adsorbents for the elimination of two anionic dyes, reactive red 2 and methyl orange, and the cationic dye methylene blue from aqueous solutions under the same conditions. Carbon nanomaterials performed well in the removal of dyes. Surface oxygenated groups in the nanomaterials improved the cationic dyes’ adsorption, but not the adsorption of the anionic dye. The interactions between nanomaterials and dyes were verified by infrared and Raman spectroscopy. The pseudo-second order kinetic model was better fitted to the kinetic experimental data than the Elovich and pseudo-first order models. The equilibrium adsorption data were best fitted by the Langmuir model. The dimensions and morphology of the carbon nanomaterials play an important role in the adsorption of the three dyes. The main mechanism of adsorption of anionic dyes is by the interactions of the aromatic rings of the dye structures and π delocalized electrons on carbon nanostructures; the adsorption of cationic dye is mainly due to electrostatic interactions.

To preserve the superior genetic resources and restore the endangered species, Somatic cell nuclear transfer (SCNT) has been used widely. In Korea, the research of dog cloning has made outstanding achievements including the production of the world`s first cloned dog. Sapsaree (Sapsalgae), the representative dog of Gyeongsan-si was designated as a Korea natural monument (No. 368). This male dog used in this study has azoospermia due to unknown cause. In this study, the aim was to confirm the cause of infertility in the cell donor dog and to evaluate the reproduction potential of dog cloning using infertile male dog by SCNT. First, to confirm the infertility of the cell donor dog, the reproductive history and the testis were evaluated. The breeding histology was not recorded in individual document. In histopathology, the Sertoli cell tumor was confirmed in biopsy of the cell donor dog after death. But, these tumors are predominantly in older dogs. Second, we produced the cloned dogs with the somatic cells of the infertile dog and the appearance was similar with the cell donor dog. Also, microsatellite analysis confirmed the genetic relationship between the cell donor and clone dogs. Third, the potential breeding capacity of the cloned dog was confirmed. In T4 assay, the normal dog (same age with cloned dogs), cell donor dog, and cloned dogs was investigated. The cell donor dog with azoospermia had very low T4 level, and cloned dogs showed higher level of T4 than normal dogs. In CASA, There was no significant difference in sperm motor ability between normal dogs and cloned dogs. As a result, cloned dogs produced by SCNT had no problem regarding the reproductive function of the testis. In AI experiment, the semen of clone dogs was used to fertilize a natural female bitch and was diagnosed pregnancy by ultrasonography. In total, 7 puppies were born by normal delivery (male: 3, female: 4). In conclusion, this study confirmed that the reproduction problem of non-genetic infertility can generate a normal descendant by SCNT. Also, the first successful research to restore infertile dogs was completed. Furthermore, SCNT would be useful for the restoration of endangered species and application of superior traits.

Self-construal refers to how people define themselves in relation to others (Brewer & Gardner 1996; Markus & Kitayama 1991; Singelis 1994) and this concept is relevant to a range of consumer behavior’s (Mandel, 2003; Escalas & Bettman, 2005). Most importantly, self-construal can be used to understand behaviors in which the influence of others may play a significant role in influencing uptake of risky behaviors, such as tobacco smoking. This research examines the role of self-construal in resisting tobacco smoking among Tongan and New Zealand European women. While previous work on self-construal has primarily used a quantitative approach, this study argues that a qualitative approach, specifically using images to represent scale items of self-construal is more effective in capturing the nuances of self-construal in the context of minority groups. This study contributes methodologically to the self-construal literature by demonstrating how a qualitative approach enables the complexities of self-construal to be captured in a way that a quantitative approach would not have allowed.

Pollution of chloride ion-reinforced concrete can trigger active corrosion processes that reduce the useful life of structures. Multifunctional materials used as a counter-electrode by electrochemical techniques have been used to rehabilitate contaminated concrete. Cement-based pastes added to carbonaceous material, fibers or dust, have been used as an anode in the non-destructive Electrochemical Chloride Extraction (ECE) technique. We studied the performance of the addition of Carbon Fiber (CF) in a cement-graphite powder base paste used as an anode in ECE of concretes contaminated with chlorides from the preparation of the mixture. The experimental parameters were: 2.3% of free chlorides, 21 days of ECE application, a Carbon Fiber Volume Fraction (CFVF) of 0.1, 0.3, 0.6, 0.9%, a lithium borate alkaline electrolyte, a current density of 4.0 A / m2 and a cement/graphite ratio of 1.0 for the paste. The efficiency of the ECE in the traditional technique using metal mesh as an anode was 77.6% and for CFVF of 0.9% it was 90.4%, with a tendency to increase to higher percentages of the CFVF in the conductive cement-graphite paste, keeping the pH stable and achieving a homogeneous ECE in the mass of the concrete contaminated with chlorides.

The Korea Astronomy and Space Science Institute plans to develop a coronagraph in collaboration with National Aeronautics and Space Administration (NASA) and to install it on the International Space Station (ISS). The coronagraph is an externally occulted one-stage coronagraph with a field of view from 3 to 15 solar radii. The observation wavelength is approximately 400~nm, where strong Fraunhofer absorption lines from the photosphere experience thermal broadening and Doppler shift through scattering by coronal electrons. Photometric filter observations around this band enable the estimation of 2D electron temperature and electron velocity distribution in the corona. Together with a high time cadence ($<$12~min) of corona images used to determine the geometric and kinematic parameters of coronal mass ejections, the coronagraph will yield the spatial distribution of electron density by measuring the polarized brightness. For the purpose of technical demonstration, we intend to observe the total solar eclipse in August 2017 with the filter system and to perform a stratospheric balloon experiment in 2019 with the engineering model of the coronagraph. The coronagraph is planned to be installed on the ISS in 2021 for addressing a number of questions (e.g., coronal heating and solar wind acceleration) that are both fundamental and practically important in the physics of the solar corona and of the heliosphere.