Piezoelectric harvester for road power generation was installed on test roads owned by Korea Highway Corporation. 24 harvesters were installed on the concrete pavement and the remaining 12 harvesters were installed on the asphalt pavement. After installation, power generation performance and environmental tests were carried out with three types of vehicles: compact / passenger cars / trucks. The running speed of the vehicle was 30 km/h, 60km/h, 90 km/h. The test results show that the larger the weight of the vehicle, the higher the power generation, the concrete road than the asphalt road, and the exposed type rather than the buried type. The generation amount according to the depth of buried was at least 2.2 times at the depth of 1cm than 5cm depth. When the delegator lighting test was performed using 12 harvesters, it was possible to light up more than 20 seconds in one vehicle due to the improvement of the charging circuit. In addition, the wireless communication module driving test enabled temperature sensing and data transmission for 25 seconds. In addition, there was no breakage of the pavement when driving more than 180 times, and the generation amount was maintained more than 90%. However, Test for the durability of the pavement and the self-durability of the harvester is required more than 180 times of vehicle driving conditions and required more than minimum of 6-12 months of long-term monitoring.

Hierarchically porous, chemically activated carbon materials are readily derived from biomass using hydrothermal carbonization (HTC) and chemical activation processes. In this study, empty fruit bunches (EFB) were chosen as the carbon source due to their sustainability, high lignin-content, abundance, and low cost. The lignin content in the EFB was condensed and carbonized into a bulk non-porous solid via the HTC process, and then transformed into a hierarchical porous structure consisting of macro- and micropores by chemical activation. As confirmed by various characterization results, the optimum activation temperature for supercapacitor applications was determined to be 700°C. The enhanced capacitive performance is attributed to the textural property of the extremely high specific surface area of 2861.4 m2 g–1. The prepared material exhibited hierarchical porosity and surface features with oxygen functionalities, such as carboxyl and hydroxyl groups, suitable for pseudocapacitance. Finally, the as-optimized nanoporous carbons exhibited remarkable capacitive performance, with a specific capacitance of 402.3 F g–1 at 0.5 A g–1, a good rate capability of 79.8% at current densities from 0.5 A g–1 to 10 A g–1, and excellent life cycle behavior of 10,000 cycles with 96.5% capacitance retention at 20 A g–1.

Sexual dimorphism is the most conspicuous difference between the sexes. This study examines possible sexual dimorphism and the relative growth patterns of morphometric characteristics in the marine medaka, Oryzias dancena for their potential to help differentiate between males and females of this species. The von Bertalanffy growth parameters estimated by a non-linear regression method were L∞=30.2 mm, K=3.22/year, and τ0=-0.05. All 18 characteristics measured showed a difference between males and females from 70 days after hatching. Each of these characteristics were significantly different between sexes (ANCOVA, P<0.05), and the ratio of standard length between sexes showed that males were larger than females for all five morphometric measurements. Fin length measurements were taken for 21 distances of anal fin and 7 distances of dorsal fin between landmarks. There were all differences for all dorsal fin rays between the males and the females and there is significant difference in 70 days after their hatch when the sexual dimorphism is presented. The significant difference (P<0.05) in fin ray for male and female was more greatly seen as they grow. Male marine medaka showed more rapid growth than females, with longer length, dorsal fins and anal fins. Differences in these characteristics will be useful during experiments when it is necessary to differentiate between sexes of marine medaka.

Cereal seeds, sorghum, foxtail millet, hog millet, adlay, and corn are traditionally used as health assistant as well as energy supplying food in Korea. While beneficial phytochemicals to human have revealed in cereals, the information on peptides from cereals is far less accumulated than major reserve protein. Here, we analyzed peptide profiles using surface enhanced laser desorption/ionization time of flight mass spectrometry (SELDI-TOF MS) in cereal seeds for construction of peptide information and attempted to develop peptide biomarkers for cereal identification. To optimize the analysis condition of SELDI-TOF MS, the effect of dilution factor on binding affinity to protein chips was tested using CM10 and Q10 arrays. Peptide clusters were significantly different at the level of 0.01 p-value. Peak spectra were the most stable in 1:50 of dilution factor in both chip arrays. Numbers of detected peak of 5 cereal seeds were 131 in CM10 and 74 in Q10 array. Each cereal was grouped as a cluster and well discriminated into different cluster in the level of 0.01 p-value. Numbers of potentially identified peptide biomarkers are 11, 13, 9, 5 and 12 in sorghum, foxtail millet, hog millet, adlay and corn, respectively. This study demonstrates that each cereal seed have own distinguishable specific peptides although their function are not identified yet in this study. In addition, the proteomic profiling using SELDI-TOF MS techniques could be a useful and powerful tool to discover peptide biomarker for discrimination and assess crop species, especially under 20 kDa.