Haemaphysalis longicornis는 사람과 동물에게 여러 심각한 병원체를 전달하는 주요 매개체로, 한반도에 널리 분포하고 있다. H. longicornis는 Rickettsia spp., Borrelia spp., Francisella spp., Coxiella spp., 그리고 중증열성혈소판 감소증후군 바이러스 (SFTS virus) 등을 매개하는 것으로 알려져 있다. 국내에 서식하는 H. longicornis의 미생물 군집과 관련된 연구는 많이 진행되지 않은 것으로 확인되었다. 이 연구는 한반도 내 다양한 지역에서 채집된 H. longicornis의 미생물군집 다양성을 지역별, 성장 단계 및 성별에 따라 분석하였다. 2019년 6월부터 7월까지 질병관리청 권역별기후변화매개체감시거점센터 16개 지역에서 채집한 H. longicornis의 16S rRNA 유전자 V3-V4 영역을 PCR로 증폭 후 Illumina MiSeq 플랫폼으로 시퀀싱하였다. Qiime2를 활용한 미생물 다양성 분석을 통해 총 46개의 샘플에서 1,754,418개의 non-chimeric reads를 얻었으며, 평균 126개 의 operating taxonmic unit (OTU) 을 식별하여 총 1,398개의 OTU를 확인하였다. 대부분의 지역에서 Coxiella spp.가 우점종으로 나타났으며, 특히 Coxiella endosymbiont는 가장 높은 우점도를 보이며, Coxiella burnetii와 계통 발생 학적으로 유사한 것으로 확인되었다. 이 연구를 통해 분석된 결과는 각 지역의 H. longicornis 미생물군집 데이터 베이스 구축에 활용되었으며, 이를 통해 지역별 미생물군집의 특이성을 식별할 수 있게 하였다. 이는 한반도의 H. longicornis에 의한 질병 전파 연구와 이를 통한 공중보건 개선에 기여할 것으로 기대된다.

Pasture formation and management are crucial to avoid yield reduction. This experiment aimed to examine the effects of tall fescue-centered mixed-seeding combinations on yield and vegetation changes in perennial pastures in the central region for two years, from September 2020 to October 2022. The treatments were arranged in three replications in a randomized block design: control (C), tall fescue-based mixture-1 (T-1), and tall fescue-based mixture-2 (T-2). The tall fescue (TF), orchard grass (OG), perennial ryegrass (PRG), Kentucky bluegrass (KBG), and white clover (WC) were used. The emergency rate of grasses (70.0 to 73.3%) did not differ among mixed seeding combinations. Overwintering rates (81.7 to 83.3%) were similar among treatments. The plant height of grasses was similar at each harvest date, with the highest height (86.2 cm) recorded in the second harvest of the first year, followed by that (58.4 cm) in the third harvest of the first year; it was least (38.9 cm) in the fourth harvest of the second year. There was no significant difference in the dry matter yield of grasses among the mixed seeding combination treatments in the first, third, or fourth harvests of the first year (p>0.05). For second-year grasses, dry matter yield was not significantly different in harvest date among the treatments (p>0.05). Based on mixed seeding ratio, orchard grass showed the highest yield at 70% in the C treatment, followed by tall fescue at 80% and 60% in the T-1 and T-2 treatments, respectively, in the first harvest after seeding. There was no significant difference in feed value between treatments (p>0.05), but a significant difference was observed between the third and fourth harvest (p<0.05). Therefore, it indicated that it is important to create perennial pastures in the central region through mixed seeding combinations centered on tall fescue.

KORAD (Korea Radioactive Waste Agency, http://www.korad.or.kr) has stored slightly contaminated ascon (asphalt coated concrete mixture) that was introduced to Gyeongju repository about a decade ago waiting for a final disposal. It is believed to be mainly contaminated by radioisotope 137Cs due to impurities introduced from the outside during the ascon manufacturing process. We studied characteristics of the radioactive waste to see whether this material would be proper enough to be disposed in Gyeongju LILW repository or be other ways to reduce the disposal volume including self-disposal before its final disposal otherwise. KORAD looked into the properness of characteristics of ascon in terms of WAC (Waste Acceptance Criteria) documented by KORAD that includes general chemical and physical properties of asphalt, density, size of grains, content of organic material and possibility of existence of chelate materials that qualitatively limited to be disposed by the criteria. And other associated characteristics such as gas generation and bio degradation were also investigated. Based on the data obtained from the study, we proposed various plausible solutions in associated with operational and disposal safety and economic view points. This study will be used for KORAD’s decision on how to control and safely dispose the spent ascon within a reasonable time period. And also those experiences may be applied for other LILW issues that require treatment or conditioning of radioactive wastes in the future.

Radioactive waste is typically disposed of using standard 200 and 320 L drums based on acceptance criteria. However, there have been no cases evaluating the disposal and suitability of 200 L steel drums for RI waste disposal. There has been a lack of prior assessments regarding the disposal and suitability of 200 L steel drums for the disposal of RI waste. Radioactive waste is transported to disposal facilities after disposal in containers, where the drums are loaded and temporarily stored. Subsequently, after repackaging the disposal drums, the repackaged drums are transported to disposal facilities by vehicle or ship for permanent disposal. Disposal containers can be susceptible to damage due to impacts during transportation, handling, and loading, leading to potential damage to the radiation primer coating during loading. Additionally, disposal containers may be subject to damage from electrochemical corrosion, necessitating the enhancement of corrosion resistance. Metal composite coatings can be employed to enhance both abrasion resistance and corrosion resistance. The application of metal composite coatings to disposal containers can improve the durability and radiation shielding performance of radioactive waste disposal containers. The thickness of radioactive waste disposal containers is determined through radioactive shielding analysis during the design process. The designed disposal containers undergo structural analysis, considering loading conditions based on the disposal environment. This paper focuses on evaluating the structural improvements achieved through the implementation of metal composite coatings with the goal of enhancing corrosion and abrasion resistance.

This experiment was carried out to examine double cropping system using Italian ryegrass (IRG) 'Kowinearly', whole crop rice 'Yeongwoo' and barnyard millet 'Jeju native' during the Oct. 2020 to Oct. 2022. Three kinds of forage crops were cultivated at paddy field in Livestock Institute, Jeollanamdo Agricultural Research and Extension Services, Jeollanamdo, South Korea. Whole crop rice (WCR) was sown in late May and barnyard millet (BM) sown early June each year after harvesting IRG. We examined dry matter yield and feed value of forage crops depending on harvest time of forage crops during the experimental period. The plant height in heading stage of IRG ranged from 108 to 112cm and dry matter yield ranged from 6,783 to 11,530 kg ha-1. The crude protein (CP) of IRG ranged from 6.0 to 8.44%, acid detergent fiber (ADF) ranged from 55.6 to 60.2% and neutral detergent fiber (NDF) ranged from 32.58 to 36.7%, The dry matter yield of WCR increased as the harvest stage was delayed (14,310 kg ha-1 in milk, 16,167 kg ha-1 in yellow ripen, and 18,891 kg ha-1 in mature). Similar to results of dry matter yield of WCR, dry matter yield of BM increased as the harvest stage was delayed (11,194 kg ha-1 in late heading. and 14,308 kg ha-1 in mature), However nutrient content of WCR and BM showed a decreasing trend. As shown in above results, the productivity of WCR after harvesting IRG was shown to be high at paddy field in the southern region. However, BM also was appeared to have potential as summer forage crops.

본 연구는 칼랑코에(Kalanchoe blossfeldiana) ‘Discodip’ 의 출하 후 토양수분이 분화품질 및 수명에 미치는 형태적·생리적 영향을 알아보고자 수행되었다. 분화 토양수분 처리는 고습(80% 이상)과 저습(40% 이하)으로 하였고, 분화수명, 분 화수명 종료 증상과 형태적 요인인 지상부와 지하부 생체중 및 건물중, 개화된 꽃 수, 출하 시 대비 개화율을 조사하였고, 생리적 요인은 잎의 엽록소함량 및 엽록소형광(Fv/Fm), 기공크 기 변화율을 분석하였다. 분화수명은 토양 고습 처리구(28.3 일)가 토양 저습 처리구(27.4일)보다 0.9일 높았으나 유의차 는 없었다. 분화수명 종료시점인 출하 4주 후 지하부 생체중 과 건물중, 개화된 꽃 수, 출하 대비 개화율은 토양 고습 처리 구에서 저습 처리구보다 높았다. 잎의 엽록소함량 및 엽록소 형광, 기공크기 변화율은 출하 4주 후 토양 고습 처리구에서 저습 처리구보다 수치적으로 높았으나 유의차는 없었다. 따라 서 출하 후 토양 수분에 따라 분화 칼랑코에의 품질이 시간이 경과될수록 차이가 났으며, 토양수분이 칼랑코에의 분화 품질 에 미치는 중요한 요인이라는 것을 알 수 있었다.

This experiment was carried out to determine effects of seed rate of native grasses, called native summer forage crops (NSFC), on their growth characteristics and yields in no-tillage paddy fields in central provinces. NSFC cultivation was performed according to the agricultural guidelines of the Rural Development Administration (RDA) during 2020 to 2022. Echinochloa crusgalli ‘Jeju native’, Setaria viridis ‘Korean native type’, Digitaria sanguinalis ‘Korean native type’) were sown by various seed rate in the experimental field (3m × 4m plot) of Department of Animal Resources Development, Seonghwan–eup, Cheonan, Korea in late-May or early-June for 3 years and harvested in middle-September. Dry matter yields (DMY) in Echinochloa crusgalli and Setaria viridis increased as increasing seed rate. DMY in 40 kg ha-1 of Echinochloa crusgalli was the highest and DMY in 60 kg ha-1 of Setaria viridis was the highest. However, All treatments of Digitaria sanguinalis showed similar DMY. Yields of NSFC were the order of Echinochloa crusgalli (9,681~11,092 kg ha-1) > Digitaria sanguinalis (8,311~9,023 kg ha-1) >etaria viridis (3,145~4,749 kg ha-1). The contents of crude protein in NSFC were the order of Digitaria sanguinalis > Echinochloa crusgalli > Setaria viridis. The contents of ADF and NDF in NSFC were the order of Echinochloa crusgalli > Digitaria sanguinalis > Setaria viridis. As shown in above results, we suggest that introduction of NSFC is one of the most important skills in order to stably increase yields of forage crops for utilization of the double cropping system in no-tillage paddy fields.

An induction melting facility includes several work health and safety risks. To manage the work health and safety risks, care must be taken to identify reasonably foreseeable hazards that could give rise to risks to health and safety, to eliminate risks to health and safety so far as is reasonably practicable. If it is not reasonably practicable to eliminate risks to health and safety, attention have to be given to minimize those risks so far as is reasonably practicable by implementing risk control measures according to the hierarchy of control in regulation, to ensure the control measure is, and is maintained so that it remains, effective, and to review and as necessary revise control measures implemented to maintain, so far as is reasonably practicable, a work environment that is without risks to health or safety. The way to manage the risks associated with induction melting works is to identify hazards and find out what could cause harm from melting works, to assess risks if necessary – understand the nature of the harm that could be caused by the hazard, how serious the harm could be and the likelihood of it happening, to control risks – implement the most effective control measures that are reasonably practicable in the circumstances, and to review control measures to ensure they are working as planned.

This study aimed to examine the changes in dry matter yield and growth characteristics of alfalfa (Medicago sativa L.) in response to variations in sowing dates during the autumn season of 2021-22 in a dry paddy field of Chilbo-myeon, Jeongeup-si, Jeollabuk-do. Treatments comprised four sowing dates at 10-day intervals, i.e., October 8, October 18, October 28, and November 8, 2021. The winter survival rate of alfalfa showed a significant difference between different treatments but was at a satisfactory level for all (p<0.05). The winter survival rate for the fourth sowing date, a month later than the first sowing date, was approximately 11.7% lower than that for the first sowing date. The plant height ranged between 82.3–93.1 cm and 60.5–63.7 cm at the first and second harvest, respectively, smaller at the second harvest than at the first harvest. The total dry matter yield of alfalfa was the highest at 13,316 kg/ha for the first sowing date, and the later the sowing date, the lower the dry matter yield. The protein content of alfalfa ranged between 13.6–17.3% in the first harvest, lower than the standard alfalfa protein content of 20% or more. In relative feed value, the first sowing (Oct. 8) was the most significantly higher in the first harvest (p<0.05). These results suggest that the early and mid-October sowing dates are optimum for sowing alfalfa during autumn and result in improved plant growth, dry matter yield, protein content, and winter survival compared to those at later sowing dates. Therefore, dry paddy fields can be safely employed for alfalfa cultivation with sowing dates in early and mid-October during autumn.