This study was aimed to isolate bacterial inoculants producing chitinase and evaluate their application effects on corn silage. Four corn silages were collected from four beef cattle farms to serve as the sources of bacterial inoculants. All isolates were tested against Fusarium graminearum head blight fungus MHGNU F132 to confirm their antifungal effects. The enzyme activities (carboxylesterase and chitinase) were also measured to isolate the bacterial inoculant. Based on the activities of anti-head blight fungus, carboxylesterase, and chitinase, L. buchneri L11-1 and L. paracasei L9-3 were subjected to silage production. Corn forage (cv. Gwangpyeongok) was ensiled into a 10 L mini silo (5 kg) in quadruplication for 90 days. A 2 × 2 factorial design consists of F. graminearum contamination at 1.0104 cfu/g (UCT (no contamination) vs. CT (contamination)) and inoculant application at 2.1 × 105 cfu/g (CON (no inoculant) vs. INO (inoculant)) used in this study. After 90 days of ensiling, the contents of CP, NDF, and ADF increased (p<0.05) by F. graminearum contamination, while IVDMD, acetate, and aerobic stability decreased (p<0.05). Meanwhile, aerobic stability decreased (p<0.05) by inoculant application. There were interaction effects (p<0.05) on IVNDFD, NH3-N, LAB, and yeast, which were highest in UCT-INO, UCT-CON, CT-INO, and CT-CON & INO, respectively. In conclusion, this study found that mold contamination could negatively impact silage quality, but isolated inoculants had limited effects on IVNDFD and yeast.

The aim of this study was to investigate the effect of isolated lactic acid bacteria (LAB) on the quality of high moisture rye silage. Rye forage (Secale cereale L.) was harvested at the heading stage (27.3% of dry matter (DM)) and cut into approximately 3-5 cm lengths. Then, the forage divided into 4 treatments with different inoculants: 1) No additives (CON); 2) Lactobacillus brevis strain 100D8 at a 1.2 x 105 colony-forming unit (cfu)/g of fresh forage (LBR); 3) Leuconostoc holzapfelii strain 5H4 at a 1.0 x 105 cfu/g of fresh forage (LHO); and 4) Mixture of LBR and LHO (1:1 ratio) applied at a 1.0 x 105 cfu/g of fresh forage (MIX). About 3 kg of forage from each treatment was ensiled into a 20 L mini-bucket silo in quadruplicate for 100 days. After silo opening, silage was collected for analyses of chemical compositions, in vitro nutrient digestibilities, fermentation characteristics, and microbial enumerations. The CON silage had the highest concentrations of neutral detergent fiber and acid detergent fiber (p = 0.006; p = 0.008) and a lowest in vitro DM digestibility (p < 0.001). The pH was highest in CON silage, while lowest in LBR and MIX silages (p < 0.001). The concentrations of ammonia-N, lactate, and acetate were highest in LBR silage (p = 0.008; p < 0.001; p < 0.001). Propionate and butyrate concentrations were highest in CON silage (p = 0.004; p < 0.001). The LAB and yeast counts were higher in CON and LHO silages compare to LBR and MIX silages (p < 0.001). However, the mold did not detect in all treatments. Therefore, this study could conclude that L. brevis 100D8 and Leu. holzapfelii strain 5H4 can improve the digestibility and anti-fungal activity of high moisture rye silage.

The present study was aimed to estimate the effect of ensiling period and bacterial inoculants on chemical compositions and fermentation characteristics on rye silage harvested at delayed stage. Rye (Secale cereale L.) was harvested after 20 days of heading stage (29.4% dry matter, DM). The harvested rye forage was applied with different inoculants following: applications of distilled water (CON), Lactobacillus brevis (LBB), Leuconostoc holzapfelii (LCH), or mixture of LBB and LCH at 1:1 ratio (MIX). Each forage was ensiled into 20 L mini bucket silo (5 kg) for 50 (E50D) and 100 (E100D) days in triplicates. The E50D silages had higher in vitro digestibilities of DM (IVDMD, p<0.001) and neutral detergent fiber (IVNDFD, p=0.013), and lactate (p=0.009), and acetate (p=0.011) than those of E100D, but lower pH, lactic acid bacteria (LAB), and yeast. By inoculant application, LCH had highest IVDMD and IVNDFD (p<0.05), while MIX had highest lactate and lowest pH (p<0.05). The CON and LCH in E50D had highest LAB and yeast (p<0.05), whereas LBB in E100D had lowest (p<0.05). Therefore, this study concluded that LCH application improved the nutrient digesbility (IVDMD and IVNDFD) of lignified rye silage, and longer ensiling period for 100 days enhanced the fermentation characteristics of silage compared to ensiling for 50 days.

This study was conducted to estimate the effect of different cutting lengths on fermentation characteristics and aerobic stability of whole crop rice (WCR) silage. The WCR was harvested at the yellow ripe stage (43.7%, DM), and then cut at 5 (R05), 10 (R10), and 20 cm (R20) of the theoretical length of cut with no cut WCR (R60). Each forage was ensiled into 20 L mini bucket silo (5 kg) for 150 days in quadruplicates. The cutting lengths were not affected the chemical compositions of WCR silage (p > 0.05). The pH (p < 0.001) and concentration of ammonia-N (p = 0.022) in WCR silage were increased linearly with the increase of cutting length. The concentration of lactate had quadratic effect (p = 0.007), which was highest in R20 silage (p < 0.05). The concentration of acetate was increased linearly (p = 0.014), but the concentration of butyrate was decreased linearly (p = 0.033). The lactic acid bacteria count was decreased linearly (p = 0.017), and yeast count had quadratic effect (p = 0.009), which was the highest in R20 silage (p < 0.05). Aerobic stability had strong quadratic effect (p < 0.001), which was the highest in R20 silage (p < 0.05). In conclusion, R60 silage had highest pH by a linear increase of ammonia-N concentration and led to low aerobic stability. While R20 silage had the lowest pH by high lactate concentration and led to high aerobic stability.

방사선을 이용한 도열병연구의 기초자료로서 도열병균의 포자와 발아균계에 각각 X-ray 10, 40, 80, 120kR를 조사시켜 그들의 방사선감수성 및 생존율을 조사한 결과는 다음과 같다. 1. 도열병균의 포자발아율은 X-ray 소사선량의 증가에 반비례하여 감소되었으며 120kR에서는 거의 생존하지 못하였다. 2. 비교적 저선량인 10kR 조사에서는 초기발아관신장의 촉진 현상을 보였으며 선량의 증가에 따라 균계의 사멸 현상이 현저하였다. 3. X-ray 조사에 의한 발아균계의 생존율 및 신장은 선량의 증가에 반비례하여 감소하였다. 4. X-ray를 조사받은 발아균계는 포자에 비하여 높은 방사선 감수성을 보였으며, 고선량일수록 그 차이는 현저하였다. 5. X-ray 조사에 의한 도열병균의 돌연변이율은 조사선량에 정비례하여 증가하였다.

This study was conducted to compare the volatile flavor compounds of Artemisia annua L. after extraction by simultaneous steam distillation extraction (SDE) and solid-phase micro extraction (SPME) followed by gas chromatography-mass spectrometry (GC-MS) analysis. Via SDE and SPME processes, 79 (1,254.00 mg/kg) and 39 (488.74 mg/kg) compounds were identified respectively. The compounds extracted by SDE included 27 alcohols, 13 aldehydes, 22 hydrocarbons, 3 esters, 12 ketones, 1 oxide and 1 N-containing compound, on the other hand, using the SPME method, 7 alcohols, 5 aldehydes, 1 ester, 18 hydrocarbons, 7 ketones, and 1 oxide were extracted. The major volatile flavor compounds of Artemisia annua L. isolated by the two methods were caryophyllene oxide, -caryophyllene, camphor, -selinene, -muurolene, 1,8-cineol, (E)-pinocarveol and pinocarvone. β β γ The sesquiterpene named caryophyllene oxide was the most abundant volatile flavor compound with relative contents of 234.16 mg/kg and 195.44 mg/kg obtained by the SDE and SPME methods, respectively. Among the identified volatiles, sabinene, β-pinene, α-terpinene, γ-terpinene, yomogi alcohol, myrtenol, (Z)-nerolidol, p-cymen-8-ol and eugenol were detected by the SDE method only while (E)-anethole and α-cubebene were detected by the SPME method only. This study confirmed that the composition and contents of the volatile flavor compounds vary between different extraction methods. More volatile flavor compounds were identified using the SDE method than the SPME method.