This study uses first-principles calculations to investigate the mechanical properties and effect of strain on the electronic properties of the 2D material 1H-PbX2 (X: S, Se). Firstly, the stability of the 1H Pb-dichalcogenide structures was evaluated using Born’s criteria. The obtained results show that the 1H-PbS2 material possesses the greatest ideal strength of 3.48 N/m, with 3.68 N/m for 1H-PbSe2 in biaxial strain. In addition, 1H-PbS2 and 1H-PbSe2 are direct semiconductors at equilibrium with band gaps of 2.30 eV and 1.90 eV, respectively. The band gap was investigated and remained almost unchanged under the strain εxx but altered significantly at strains εyy and εbia. At the fracture strain in the biaxial direction (19 %), the band gap of 1H-PbS2 decreases about 60 %, and that of 1H-PbSe2 decreases about 50 %. 1H-PbS2 and 1H-PbSe2 can convert from direct to indirect semiconductor under the strain εyy. Our findings reveal that the two structures have significant potential for application in nanoelectronic devices.
비료는 작물 재배 및 생산성 증대를 위해 필수 농업자재이다. 식량안보 및 영양결핍 해소를 위해 베트남에서는 스마트 한 방법으로 농업의 혁신을 가속화하고 있다. 작물 생산의 주된 목적은 시장 요구에 맞는 안전한 농산물을 재배하는 것으로 본 논문에서는 작물 생산 측면에서의 베트남의 화학비료 및 유기비료에 대한 현황 등을 소개하였다. 1960년대부터 최근까지 베트남의 비료 역사와 작물 재배에 있어 화학비료와 유기비료의 현황 등을 소개하였다. 베트남에 서 대부분의 작물 재배에 있어 화학비료와 유기비료를 7:3의 비율로 사용하는 것을 권장하였다. 그러나, 무엇보다 토양, 기후, 작물 및 시장의 요구에 맞게 양분 균형을 이루어지게 활용하는 것이 중요하다고 제안하였다. 또한, 완효성 비료 등 차세대 글로벌 시장의 비료 산업에 대한 전망도 제안하였다.
Rice husk, in large quantities, is released to the environment due to rice production in Vietnam. If this material can be utilized, it can solve not only the economic issues but also the environmental problems and sustainable development of the country. Laboratory evaluation of asphalt mixture using Nano silica made from rice husk to improve rutting resistance of asphalt mixtures was presented in this study. A 60/70 bitumen was used as control asphalt binder. The ratio of Nano SIO2 used in this study was 0.3%, 0,6%, 0,9%, 1,2%, and 1,5% by weight of powder. A dense gradation with nominal maximum aggregate size of 12.5mm was used for the asphalt mixtures. Marshall stability (MS) test and wheel tracking (WT) test were conducted to evaluate the rutting resistance of asphalt mixtures. It was found that the asphalt mixtures using 0.5%, 1.0%, and 1.5% Nano SIO2 have the rut depths of 5.35mm, 5.39mm, and 5.45mm, respectively, which is 30%, 31% and 29% lower than the control asphalt mixtures at 15,000 load cycles. Moreover, the static modulus of asphalt mixtures using 0.9% Nano SIO2 at 60oC is higher than the control mixtures. Based on the results of this study, it can be concluded that the addition of Nano SIO2 into asphalt mixtures can enhance the rutting performance of asphalt concrete under high temperatures significantly. It is noted that these conclusions were based on only on a limited number of samples and conditions. Further studies must be conducted to investigate the effect of Nano SIO2 on fatigue cracking and moisture damage of asphalt pavement in the field.
Worldwide there is concern about the continuing release of a broad range of environmental endocrine disrupting chemicals, including polychlorinated biphenyls, dioxins, phthalates, polybrominated diphenyl ethers (PBDEs), and other halogenated organochlorines persistent organic pollutants (POPs) into the environment. They are condemned for health adverse effects such as cancer, reproductive defects, neurobehavioral abnormalities, endocrine and immunological toxicity. These effects can be elicited via a number of mechanisms among others include disruption of endocrine system, oxidation stress and epigenetic. However, most of the mechanisms are not clear, thus several number of studies are ongoing trying to elucidate them in order to protect the public by reducing these adverse effects. In this review, we briefly limited review the process, the impacts, and the potential mechanisms of dioxin/dioxin like compound, particularly, their possible roles in adverse developmental and reproductive processes, diseases, and gene expression and associated molecular pathways in cells.
The purpose of this paper is to (1) evaluate a proposed conceptual model based on integrated Technology Acceptance Model (TAM) and Corporate Social Responsibility (CSR); (2) compare the differences between Vietnam and South Korea regarding the effects of consumer perception of CSR activities and technology acceptance on intention to adopt mobile banking. Structural Equation Modeling (SEM) was conducted to analyze the data collected from the field survey questionnaires administered to a convenience sample of Vietnamese and Korean banking customers. The results showed that there is a difference between South Korea and Vietnam with regard to intention to use mobile banking services. While the effects of social responsibility and environmental responsibility on trust, trust on perceived usefulness, perceived risk on intention to use, perceived usefulness on intention to use were significant in the context of Vietnam but those effects were not significant in South Korea. Therefore, this study has attempted to fill this gap by empirically examining some of the important factors influencing the adoption of m-banking from the Vietnamese and Korean customers’ perspectives. Finally, practical and theoretical implications for both banks and researchers in the m- banking context are also discussed in the concluding section.
Employability has recently become the first target of the national higher education. Its model has been updated to catch the new trend of Industry 4.0. This paper aims at analyzing and ranking the determinants of undergraduate employability, focusing on business and economics majors in Ho Chi Minh City, Vietnam. In-depth interviews with content analysis have been primarily conducted to reach an agreement on a key group of factors: human capital, social capital, and identity. The Stochastic Fractal Search Algorithm (SFSA) is then applied to rank the sub-factors. Human capital is composed of three major elements: attitude, skill, and knowledge. Social capital is approached at both structural and cognitive aspects with three typical types: bonding, bridging, and linking. The analysis has confirmed the change of priority in employability determinants. Human capital is still a driver but the priority of attitude has been confirmed in the contemporary context. Then, social capital with the important order of linking, bridging, and bonding is emphasized. Skill, knowledge, and identity share the least weight in the model. It is noted that identity is newly proposed in the model but a certain role has been found. The findings are crucial for education strategies to enhance university graduate employability.
The shift from elite education to mass education in Vietnam has met the demand for education for everybody as well as for quality human resource talent for an emerging nation. Under the resource constraint, understanding the quality dimensions of education and its priority level is important for effective and efficient policies. This study was carried out using both qualitative and quantitative methodologies to develop quality criteria and a ranking model. Two rounds of in-depth interviews were conducted with fifteen experts in the field, who were rectors, employers, and recruitment specialists to develop the quality framework applied in Vietnamese universities under total quality management (TQM), starting from the input of the senior secondary school leavers, through a teaching process to the output. The first round of interviews were unstructured questionnaires designed to explore the main factors in quality assessment model. The second round affirmed the experts’ agreement on the assessment model. Then, fuzzy logic was applied to rank eight criteria in the quality assessment model into priority order: cost, teaching and administrative staff, leadership, curriculum, student-related factors, internationalization, admissions, and campus. The results are critical for identifying the necessary actions to enhance the education quality and to further research on the optimal quality model.
Vietnam is conducting an export-led growth model and labour-intensive industries contributing majorly to the total export value. In the context of Industry 4.0, the labour-based industries are significantly affected; hence, enhancing productivity is the key measure to maintain these industries. The garment industry contributes significantly to the total export value of Vietnam. Based on meta-frontier framework, the approach of data envelopment analysis is used to measure technical efficiency of Vietnamese garment firms and the global Malmquist TFP index is utilised to identify productivity change and its components including efficiency, technology and technical gaps between different groups of firms. The data of Vietnamese garment firms from 2013 to 2018 collected from the Vietnam General Statistic Office is used in this study. The results show that: (i) The total factor productivity of Vietnamese garment firms growth, technical progress is the main contributor; (ii) The private garment sector is the leading group; (iii) There is a large technological gap among Vietnamese garment sectors. The private and FDI garment firms have experienced a growth in all components of total factor productivity change. Meanwhile, technological progress change is the main reason to constrain the productivity growth of state-owned garment firms.
The purpose of this paper is to investigate the factors influencing the Vietnamese farmers’ intention to accept organic farming based on the theory of planned behavior (TPB). After in-depth interviews with five agricultural researchers and five farmers, the authors have identified a formal research model and built a complete survey. Data were collected from 318 farmers in Hanoi, Vietnam, by surveying directly at their homes or farms. Statistical methods, such as Cronbach’s alpha, exploratory factor analysis (EFA) and linear regression analysis, were used to analyze the data with the help of SPSS 22.0 and AMOS 24.0. The results show that attitudes, subjective norms, and perceived behavioral control have a positive influence on farmers’ intention to accept organic farming in Vietnam. Based on the degree of impact of these factors, the authors give a few suggestions to state management agencies to promote the intention to accept organic farming in Vietnam: (i) increasing awareness of the difference between organic farming and conventional farming, the role of organic farming in health and the environment; (ii) increasing the activities of guiding the organic farming practices and facilitating the farmers to access these guides through many channels; and (iii) holding sessions to share practices in organic farming practices.
This study examines the influence of working capital management (WCM) factors on the profitability of steel companies listed on the Stock Exchange of Vietnam. Data was collected from audited financial statements of companies for a period of 10 years, from 2010 to 2019. The number of samples eligible for research is 20 out of 26 companies, which is equivalent to 76.9%. With the help of dedicated software Stata version 14, the impact determination of WCM (through 8 independent variables: DIO, DPO, DSO, CCC, SIZ, CR, LEV, GRO) to the firm’s profitability (through the dependent variable) is performed through multivariate regression models. Research results from companies in the steel industry in Vietnam during this period indicate that WCM has a strong impact on the profitability of businesses. Among 8 factors affecting the profitability of steel enterprises, factors DPO, DIO, DSO, CR, SIZ, GRO have a positive impact, boosting profitability; 2 factors CCC and LEV have a negative impact on profitability; in which, the effect of CCC is negligible. This conclusion is almost in contrast to many previously published studies due to the specifics of the industry as well as the different stages of economic development associated with the economic management policies of the State.
Sustainable development – including tourism development – is the general trend of all economies. With the orientation to build and develop the tourism industry into a key economic sector and become a tourist center of the Southeast region, Vietnam, Ba Ria-Vung Tau Province is demanding a proper, rational, development policy, while ensuring the development and exploitation of immediate natural advantages, and ensuring long-term sustainable development. The objective of this study is to examine the factors and their trends in sustainable tourism development in Ba Ria-Vung Tau Province, Vietnam. Methods used include descriptive statistical analysis, exploratory factor analysis and regression analysis. Data was collected from the results of a survey of 550 domestic and foreign tourists visiting Ba Ria-Vung Tau. With the help of SPSS statistical software, 12 groups of factors affecting sustainable development were identified including: economy, society, environment, humanistic tourism resources, natural tourism resources, tourism human resources, tourism products and service, tourism quality, infrastructure, technical facilities, governmental management and group of criteria to evaluate sustainable tourism development. The research results show that there are four groups of factors that significantly affect sustainable tourism development in Ba Ria-Vung Tau. These are groups of factors: Society, Environment, Tourism products and service, and Technical facilities.
The purpose of the research is to identify antecedents of mobile wallet continuance intention in Vietnam. A self-administered questionnaire was distributed to collect data from a total of 276 respondents. Partial least squares structural equation modeling was employed for analyzing the data. Five mobile wallet features – mobile application quality, mobile wallet familiarity, situational normality, payment security, and feedback mechanism – are introduced as fundamental elements, which influence customer’ continuance intention to use mobile wallet in Vietnam. The results indicate that mobile quality application and familiarity can significantly influence perceived ease-of-use (PEOU) and perceived usefulness (PU), but situational normality has an impact only on PEOU. PEOU and PU are positively related to satisfaction. On the other hand, payment security and feedback mechanism affect positively customer’ trust. As a result, the positive effects that satisfaction and trust have on electronic wallet continuance intention are confirmed. The findings can be used to advise mobile wallet providers to improve their platform design and services to retain users. As a theoretical contribution, this study combines the Technology Acceptance Model, Unified Theory of Acceptance and Use of Technology to investigate the key determinants on continuance intention in the context of electronic wallet in Vietnam.
The study investigates how marketing mix factors are mediated by health consciousness and service quality in creating fresh fruit buying decisions of customers in Vietnam. This study employs samples of customers in Vietnam via the survey questionnaire. The authors have used a total of 256 responses that acquired the valid criteria. The compound of data analysis comprises reliability test, validity test, exploratory factor analysis, group analysis and multiple regression analysis to structure the hypothesized model. Respectively, the structural equation model (SEM) is applied to conduct the multiple multivariate equations. By the assumption of causal-effect relationship between independent variables such as marketing mixed factors, and mediator as health consciousness and service quality, which potentially impact on purchase decision; the SEM method is deployed. The results reveal that consumers have paid no attention to the marketing mix factors, but they care much about service quality and health consciousness. Thus, health consciousness and service quality are effective mediators. These findings are new and contribute to the consumer behavior and retail marketing literature. The findings of this study can provide assistance to managers in the given field to understand more easily the consumer behavior about fresh fruits, then improve their own performance.
The study seeks to investigate the relationship between knowledge sharing and innovation in garment and textile enterprises. While previous research has found many factors influencing knowledge sharing, little research has been done about the influence of knowledge sharing on innovation in enterprises in developing countries like Vietnam. In particular, the textile industry plays an important role in export, but outsourcing is accounting for a high proportion of trade; it is necessary to increase innovation in order to increase the competitive advantage by internal capacity. The data is collected from a survey of 245 employees at 20 textile and garment enterprises in Vietnam to study the knowledge sharing influence on innovation. The methodology includes pilot study and quantitative method. The pilot study tests the questionnaire on the respondents. The quantitative method applies SEM analysis to measure the knowledge sharing influence on innovation. The results identify eight factors that positively impact knowledge sharing: rewarding, teamwork, management support, joy of knowledge sharing, communication, trust, commitment, and information technology. This study also shows that knowledge sharing affects innovation. The main findings are discussed for textile and garment enterprises to apply innovative capacity in the context of increasing global integration.
Livelihood capitals have a clear influence on livelihood development. As for the livelihood results, it has been pointed out in the analysis of the poor households that the ability of people to escape poverty depends especially on the access to livelihood capitals. This study aims to analyze the impacts of livelihood capital on poverty among mountain people who depend on forests through human capital, social capital, natural capital, physical capital and financial capital. This research employs the model of binary regression function. Independent variables x1, x2, ..., xn are targets of livelihood strategy, vulnerability context, and livelihood capitals. These variables were selected to be included in the original model with dependent variable Y as poor and non-poor households. This study surveys households living in upland areas, near forests, and households of ethnic minorities. The results show that,out of the poor household rate, nearly 4% are newly-poor households or those falling back into poverty. Therefore, the government needs to pay more attention to this disadvantaged group and implements policies such as education and training policies, credit support policies, policies to support forest development, and payment for forest environmental services in the context of emerging countries like Vietnam.,
This article aims to measure the impact of economic growth and urbanization on poverty reduction in Vietnam, and verify whether economic growth and urbanization will help reduce poverty rates. Data for this study are tabular data related to growth, urbanization and poverty at the provincial level for the period of nine years, from 2006 to 2014 provided by the Vietnam General Statistics Office and the Vietnam General Department of Customs. The level of economic growth and urbanization mentioned in the study is reflected in such indicators as GDP value, exports value, imports value, urbanization rate and employment rate. The authors used logistic regression models with fixedeffects and logistic regression models with random effects. With 5% confidence level tested by the Chi-Square test of Hausman trial with the fixed-effect model, research results show that: (1) factors with significant negative impact on the poverty rate include imports value, urbanization rate and, employment rate; (2) factors that do not affect the poverty rate include exports value and GDP value. Based on the research results, this study proposes a number of policy recommendations to help promote economic growth, to sustain the urbanization process, and to contribute directly and positively to poverty reduction in Vietnam.