천궁(Cnidium officinale Makino, COM)은 산형과(Umbelliferae)에 속하는 산림약용자원 중 하나로 뿌리나 지하 부를 건조한 후 약용으로 사용하는 여러해살이 산림약초 중 하나이다. 천궁(COM)은 고혈압, 진통 및 진정 등에 효과가 있다고 알려져 있어, 산림약용자원으로서 재배되는 품목 중 하나이지만 해충의 피해가 심각하여 방제에 어려움이 많이 있다. 천궁은 뿌리가 약재로 사용되지만 종근에 피해를 가하는 응애류 및 파리류 해충은 지하부에 활동하는 생태특성을 가지고 있어 피해초기에 발견하기 어려울 뿐만 아니라 방제가 어려운 실정이다. 천궁 (COM)은 연작이 되지 않은 작물 중에 하나이므로 재배포장을 매년 바꿔가면서 재배되고 있는 실정이다. 수확시 기는 가을이므로 재배하는 동안에는 정확한 병해충조사가 쉽지 않을 뿐만 아니라 정확한 발생시기 및 피해정도 를 확인하는 것이 어려운 실정이다. 본 연구의 목적은 천궁의 해충 및 천적곤충에 대해 조사하여 천궁의 해충종류 및 발생에 대해 이해하고 이를 기반으로 친환경 방제를 위한 천적류의 정보수집 및 분석 등을 위한 기초자료로 제공하고자 한다.

A one-year-old, female, Maltese dog was presented with head tilting, horizontal nystagmus, and tetraparesis. Blindness was first identified, and magnetic resonance imaging (MRI) scanning revealed diffuse lesion which was hyperintense on T2-weighted image over the cerebellum and brainstem. The immunosuppressive therapy had been administered, but the patient had no improvement. Re-performed MRI revealed the progression of the pre-existed inflammatory lesions. Treatment with prednisolone, leflunomide, cyclosporine, and cytosine arabinoside was initiated. However, neurological signs had been progressive, and the patient was euthanized. The histopathological examination revealed the disseminated granulomatous meningoencephalomyelitis (GME). This GME case suggests the importance of initiation of treatment at the appropriate time.

Zinc injection into the coolant system of nuclear power plants is an effective method for reducing corrosion and improving performance. The effectiveness of this method is influenced by various factors such as zinc concentration and injection rate. This paper provides an overview of the factors affecting the effectiveness of zinc injection in nuclear power plants, with a focus on zinc concentration and injection rate, and discusses various research results on the effects of these factors on corrosion reduction and coolant system performance. Zinc concentration is an important factor affecting the effectiveness of zinc injection. The research results show that gradual increases in zinc concentration are more effective for coolant system stability. However, the concentration should not exceed the recommended levels as high zinc concentrations can have negative effects on the system. Injection rate is also an important factor affecting the effectiveness of this method. The research results show that gradual increases in injection rate are more effective for coolant system stability. However, excessive injection rates can have negative effects on the system such as overload of the zinc injection facility and chemical shocks within the coolant system, and therefore, should be optimized. In conclusion, zinc concentration and injection rate are important factors affecting the effectiveness of zinc injection in nuclear power plants. The optimal concentration and injection rate should be determined based on specific reactor conditions and system requirements, and efforts should be made to maximize corrosion reduction and performance improvement.

Korean innovative SMR has been implemented developing with improved safety/economy and i- SMR technology development project to secure a competitive edge in SMR. For nuclear power plants, according to the revision of the Nuclear Safety Act (2013.6), it is mandatory to be reflected in the aging management program of nuclear power plants, and the aging management and regulation of major nuclear power plants are being strengthened. For i-SMR, chemistry environment and management strategy is essential to mitigate corrosion and radiation fields, since it has compacted and integrated module designs. Since 1994, zinc injection into the reactor coolant system (RCS) has been applied more than 100 PWRs in the world to mitigate primary water stress corrosion cracking (PWSCC) and to reduce outof- core radiation fields. In domestic NPPs, 7 have been applying zinc injection and had up to 90% radiation field reductions. For this reason, SMR needs to apply zinc injection for chemistry strategy. Zinc target concentration will be 5~40 ppb at i-SMR, based on Ni-Fe-Cr materials as same as PWRs. Zinc injection location is in volume and purification control system between the volume control tank and charging P/P where the pressure is moderate. Zinc injection skid can consist of two micro-controllable pump (one for operation and one for stand-by) and one injection tank (batching tank for zinc solution). Zn, Ni, Si, Fe, and activated corrosion products should be monitored to identify zinc injection controls and trends. Flux mapping for core performance monitoring should be evaluated. The application of zinc will be essential and effective and bring sustainable reliability for corrosion control and mitigation strategy to meet the risk-free i-SMR development.

Aster 속에 속하는 자생식물로는 눈갯쑥부쟁이, 개쑥부쟁이, 쑥부쟁이, 벌개미취, 참취 등이 있는데, 대부분 식용 또는 관상용 으로 많이 활용되고 있다. 특히 눈갯쑥부쟁이는 제주 한라산(표 고 1,200~1500m근처)에서 자생하는 한반도 특산식물로써, 다른 Aster 속과 다르게 포복성을 가지고 있고 개체당 소화의 수가 많아 관상가치가 매우 뛰어나다. 또한 파종 당해년에도 개화가 가능하기 때문에 유망한 관상식물 자원이라 할 수 있다. 본 연구 에서는, 한반도 특산 눈갯쑥부쟁이의 유전자원 보존 및 대량번 식을 위한 기초자료를 확보하고자 종자의 발아특성 및 휴면유형 을 분류하였다. 눈갯쑥부쟁이 종자는 형태적으로 완전하게 발달 된 배를 가지고 있고, 배양 72시간 내에 145%의 수분을 흡수하 였다. 4가지 온도조건(4°C, 15/6°C, 20/10°C, 25/15°C)에 배양한 결과, 광조건에서는 각각 67.0%, 58.9%, 62.2%, 71.6% 발아하였 고, 암조건에서는 각각 79.4%, 65.9%, 65.9%, 49.1% 발아하였 다. 저온층적처리(4°C) 실험 결과, 최종 발아율에는 큰 차이가 없었으나, 층적처리 기간 동안에도 발아하는 특성을 관찰하였 다. GA3처리 후 25/15°C에 배양한 결과, 0, 10, 100, 1000mg·L-1 처리에서 각각 57.9%, 68.3%, 74.9%, 63.9%의 발아율을 보였 다. 15/6°C에 배양한 경우에는 각각 78.3%, 62.8%, 72.2%, 55.9% 발아하였다. 본 연구에서는 위 실험들을 통하여, 약 80% 정도는 non-dormant 종자로, 나머지 약 20%는 생리적 휴면 (physiological dormancy)을 가지고 있는 것으로 판단되었다.