Metal waste generated during the dismantling of a nuclear power plant can be contaminated with radionuclides. In general, the internal structure is very complex. Thus, metal waste requires various cutting processes. When metal waste is cut, aerosols are generated. Aerosols are generally various particles of very small size suspended in the working area and remain for a considerable period. This may cause internal exposure of workers due to inhalation of radioactive aerosols generated when cutting radioactive metal waste. This study investigated various cutting processes and the size distribution of aerosols generated during the cutting process. The cutting process is normally classified into thermal cutting, mechanical cutting, and laser cutting. Thermal cutting includes plasma, flame, and oxygen cutting. Mechanical cutting includes mechanical saws, cutters, nibblers, and abrasive water jets. Stainless steel, carbon steel, aluminum, and copper are commonly used as cutting materials in nuclear power plants. The size of the aerosol generated from cutting showed a very diverse distribution depending on the cutting methods and cutting materials. In general, aerosol size is distributed within 0.1-1 μm. This size distribution is different from the 5 μm aerosol size suggested by the ICRP Publication 66 Lung model. These results show that it is necessary to conduct further studies on the size of aerosols generated when decommissioning nuclear power plants.

Transport packages have been developed to transport the decommissioning waste from the nuclear power plant. The packages are classified with Type IP-2 package. The IAEA requirements for Type IP-2 packages include that a free drop test should be performed for normal conditions of transport. In this study, drop tests of the packages were performed to prove the structural integrity and to verify the reliability of the analysis results by comparing the test and analysis results. Half-scale models were used for the drop tests and drop position was considered as 0.3 m oblique drop on packages weighing more than 15 tons. The strain and impact acceleration data were obtained to verify the reliability of the analysis results. Before and after the drop tests, radiation shielding tests were performed to confirm that the dose rate increase was within 20% at the external surface of the package. Also, measurement of bolt torque, and visual inspection were performed to confirm the loss or dispersion of the radioactive contents. After each drop test, slight deformations occurred in some packages. However, there was no loss of pretension in the lid bolts and the shielding thickness was not reduced for metal shields. In the package with concrete shield, the surface dose rate did not increase and there was no cracks or damage to the concrete. Therefore, the transport packages met the legal requirements (no more than a 20% increase of radiation level and no loss or dispersion of radioactive contents). Safety verifications were performed using the measured strain and acceleration data from the test, and the appropriate conservatism for the analysis results and the validity of the analysis model were confirmed. Therefore, it was found that the structural integrity of the packages was maintained under the drop test conditions. The results of this study were used as design data of the transport packages, and the packages will be used in the NPP decommissioning project in the future.

Currently, there are 25 nuclear power plants (NPPs) in operation in Korea, including 22 pressurized water reactors (PWRs) and three pressurized heavy water reactors (PHWRs). Two NPPs, including Kori Unit 1 and Wolsong Unit 1, are permanently shut down and awaiting decommissioning. If Kori Unit 2, which is expected to be permanently shut down soon, is included, the number of decommissioning NPPs will be increased to three. Spent fuels (SFs) are continuously generated during the NPP operation, which are stored in an SF storage pool in NPPs to cool down the decay heat emitted from SFs. For safe NPP operation, SFs must be regarded as waste, and a disposal site must be selected to isolate SFs. However, an appropriate site has yet to be selected in Korea. SFs contain long-lived nuclides with a high specific activity. For disposal, it is important to characterize the nuclides in the fuels and delay the migration of the nuclides to the environment when SFs are placed in a future disposal facility. If the disposal container is broken, the nuclides in the fuels escape from the filling material, such as bentonite. These escaped nuclides are dissolved in groundwater and migrate to the surface of the earth. Thus, it is possible to assess the radiological impact, such as the exposure dose during and after the disposal, if the types and characteristics of nuclides in SFs are known. This study investigated the nuclides in SFs and identified exposure scenarios that may occur in the disposal process of SFs and migration characteristics when the nuclides leak into groundwater to propose a dose assessment methodology for workers and the public.

The Korea Laboratory Accreditation Scheme (KOLAS) is the national accreditation body responsible for providing accreditation services to testing and calibration laboratories. The primary objective of KOLAS is to promote the quality and reliability of laboratory testing by providing nationally and internationally recognized accreditation services. Laboratories accredited by KOLAS are required to meet rigorous international standards set by the International Organization for Standardization (ISO) and are subject to regular assessments to ensure ongoing compliance with the standards. KOLAS accreditation is highly regarded both domestically and internationally, and is recognized for providing high-quality and reliable testing services. The nuclear analysis laboratory at KINAC has been working to establish a quality management system to ensure the external reliability of analytical results and to secure its position as an authorized testing agency. To achieve this, a detailed manual and procedure for nuclear material analysis were developed to conform to the international standards of ISO/IEC 17025. This study presents the preparation process for establishing the management system, focusing on meeting technical and quality requirements for the implementation of the ISO/IEC 17025 standard in the KINAC nuclear analysis laboratory, specifically in the field of chemical testing (dosimetry, radioactive, and neutron measurement subcategories). The preparation process involved two tracks. The first track focused on satisfying technical requirements, with Thermal Ionization Mass Spectrometer (TIMS) and Inductively Coupled Plasma-Mass Spectrometer (ICP-MS) selected as the major equipment for analysis. Analytical methods for determining isotope ratios and concentrations of nuclear materials were determined, and technical qualification was ensured through participation in proficiency test programs, inter-experimenter comparison tests, and uncertainty reports. The second track focused on developing the quality system, including quality manuals, procedures, and guidelines based on the requirements of the ISO/IEC 17025 standard. Various implementation documents were produced during the six-month pilot period, in accordance with the three levels of documents required by the standard. Implementation of ISO/IEC 17025 is expected to have a systematic quality management process for the analysis lab’s operations and to increase confidence in KINAC’s nuclear analysis.

This study aimed to verify the whitening effect of Cordyceps militaris, which is distributed in several countries worldwide, including Korea, Japan, and China, and has various medical effects. To screen the efficacy of C. militaris, the inhibitory activity of tyrosinase, which was 66% at a concentration of 1 mg/mL, was measured. Thereafter, the survival rate of melanoma cells was measured, and cell experiments were conducted at a concentration of 90% or more in which C. militaris was not toxic to cells. After measuring the inhibitory effect of TRP-1, TRP-2, tyrosinase protein, and mRNA expression, which are factors influencing melanin synthesis, C. militaris was found to decrease in all factors, with an expression level that was significantly lower compared to quercetin. This confirmed that C. militaris stimulated with LED has excellent whitening activity and can be used as a functional whitening cosmetics material.

실버 페이스트는 상대적으로 낮은 열처리로 공정이 가능하기 때문에 전자 소자 응용분야에서 유용한 전극 재료이다. 본 연구에서는 은 페이스트 전극에 대기압 플라즈마 제트를 이용하여 전극 표면을 처리 했다. 이 플라즈마 제트는 11.5 kHz 작동 주파수에서 5.5 ~ 6.5 kV의 고전압을 사용하여 아르곤 분 위기에서 생성되었다. 플라즈마 제트는 대기압에서 수행함으로써 인쇄 공정에 더 유용할 수 있다. 플라즈 마 처리시간, 인가된 전압, 가스유량에 따라 전극의 표면은 빠르게 친수성화 되었으며 접촉각의 변화가 관 찰되었다. 또한, 대면적 샘플에서 플라즈마 처리 후 접촉각의 편차가 없었는데, 이는 기판의 크기에 관계없 이 균일한 결과를 얻을 수 있었다는 것을 의미한다. 본 연구의 결과는 대면적 전자소자의 제조 및 향후 응 용 분야에서 적층 구조를 형성하는데 매우 유용할 것으로 기대된다.