검색결과

검색조건
좁혀보기
검색필터
결과 내 재검색

간행물

    분야

      발행연도

      -

        검색결과 45

        2.
        2024.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        최근 전기차 시장의 확장으로 배터리 산업이 급격히 성장함에 따라 폐배터리 리사이클링 기술 개발의 필요성이 증가하고 있다. 폐배터리 리사이클링 기술은 배터리 산업에 핵심적인 리튬, 코발트, 니켈 등 희소금속의 공급을 안정화하고 환경 및 인간의 건강에 미치는 영향을 경감할 수 있다. 본 총설에서는 금속 회수 기술의 배경이 되는 이론적 원리와 현재 상 용되고 있는 금속 회수 공정을 소개하고자 한다. 또한, 기존 공정의 문제점을 개선하려는 연구 및 기술 개발 동향을 서술하여 리사이클링 기술이 나아가야 할 방향을 소개하고자 한다.
        4,000원
        3.
        2023.04 KCI 등재 SCOPUS 구독 인증기관 무료, 개인회원 유료
        The volatilization of alkali ions in (K,Na)NbO3 (KNN) ceramics was inhibited by doping them with alkaline earth metal ions. In addition, the grain growth behavior changed significantly as the sintering duration (ts) increased. At 1,100 °C, the volatilization of alkali ions in KNN ceramics was more suppressed when doped with alkaline earth metal ions with smaller ionic size. A Ca2+-doped KNN specimen with the least alkali ion volatilization exhibited a microstructure in which grain growth was completely suppressed, even under long-term sintering for ts = 30 h. The grain growth in Sr2+-doped and Ba2+-doped KNN specimens was suppressed until ts = 10 h. However, at ts = 30 h, a heterogeneous microstructure with abnormal grains and small-sized matrix grains was observed. The size and number of abnormal grains and size distribution of matrix grains were considerably different between the Sr2+-doped and Ba2+-doped specimens. This microstructural diversity in KNN ceramics could be explained in terms of the crystal growth driving force required for two-dimensional nucleation, which was directly related to the number of vacancies in the material.
        4,000원
        4.
        2022.02 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Herein, a new and generic strategy has been proposed to introduce uniformly distributed graphitic carbon into the nanostructured metal oxide. A facile and generic synthetic protocol has been proposed to introduce uniformly distributed conducting graphitic carbon into the Co3O4 nanoparticles ( Co3O4 NPs@graphitic carbon). The prepared Co3O4 NPs@graphitic carbon has been drop casted onto the portable screen-printed electrode (SPE) to realize its potential application in the individual and simultaneous quantification of toxic Pb(II) and Cd(II) ions present in aqueous solution. The proposed Co3O4 NPs@graphitic carbon-based electrochemical sensor exhibits a wide linear range from 0 to 120 ppb with limit of detection of 3.2 and 3.5 ppb towards the simultaneous detection of Pb(II) and Cd(II), which falls well below threshold limit prescribed by WHO.
        4,200원
        5.
        2021.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this article, nitrogen (N) doped porous carbon nanofibers (N-PCNF) were prepared by carbonization of polymer-silica nanocomposite precursor, and its application for heavy metal ion removal was demonstrated. Carbon–silica composite nanofibers were obtained by carbonization of electrospun polyacrylonitrile (PAN)-silica nanofiber composites. Subsequent selective etching of silica porogen produced porous carbon nanofibers (PCNF). It was revealed by surface characterization with X-ray photoelectron spectroscopy (XPS) that the surface of the PCNF was nitrogen-doped because N atom from cyanide group in PAN chains remained in the hexagonal carbon structure. The use of the obtained N-PCNF for heavy metal ion ( Hg2+) removal was demonstrated using a simple adsorption test apparatus and 5, 10, 15, 20-tetraphenylporphine tetrasulfonic acid (TPPS) as an indicator. The N-PCNF showed a removal efficiency of 96 and 99% in 10 and 120 min, respectively, indicating a maximum heavy metal ion adsorption capacity at pH 7.0. In addition, heavy metal ion adsorption behavior was also analyzed using common adsorption isotherms. This article provides important information for future research activities regarding control over hazardous substances.
        4,000원
        6.
        2020.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        In this research, Pb (II), Co (II), and Ni (II) toxic heavy metal ions adsorption from synthetic aqueous system have been studied using the activated carbon prepared from Citrus limetta leaves. Therefore, the relationship between the adsorption parameters (solution pH, dosage of adsorbent, temperature, initial concentration of the ions, and adsorption time) and the removal percentage of the prepared adsorbent have been investigated. Additionally, the adsorbent was analyzed through BET, SEM, EDX, FTIR, and XRD analyses. According to the results, the maximal adsorption efficiencies for heavy metal ions were achieved in pH = 6, the adsorbent dosage of 1 g/L, temperature = 25 °C, the ion initial concentration of 5 mg/L, and contact time of 60 min, which were 99.53%, 98.63%, and 97.54% for Pb, Co, and Ni ions, respectively. Based on Kinetic studies, the performance of pseudo-second-order kinetic model was better than pseudo-first-order model for the description of time-dependent behavior of the process. Additionally, the equilibrium data were fitted by Langmuir and Freundlich isotherms, while the former performed better than the latter. The maximum adsorption capacity values for Pb, Co, and Ni ions were achieved equal to 69.82, 60.60, 58.139 mg/g, respectively. Considering the thermodynamic data, the studied processes were exothermic and spontaneous.
        4,900원
        7.
        2020.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        Tin bis(monohydrogen orthophosphate) monohydrate 물질의 흡착 성질에 관하여 KCl 수용액을 통하여 조사하였다. 금속이온 농도와 pH를 변화시키면서 어떻게 달라지는지 화학평형에 바탕을 두고 data를 분석하였다. 금속이온들의 흡착 data는 Langmuir 흡착식에 넣어 Langmuir 수치들을 얻는데 사용되었다. Tin phosphate는 산성에서 이온교환 화합물로 작용하였으며, 2가의 전이금속이온에 대해 Cu+2 > Co+2 > Ni+2의 순서로 선택적 흡착성질을 나타내었다. 약한 산성 이온 교환체에서와 같이 금속이온의 교환은 tin phosphate의 선택성을 결정하는데 결정적 역할을 하였다. 모든 경우에서 흡착의 정도는 온도와 농도의 증가와 함께 증가하였다. Lnngmuir 수치들은 흡착과정 동안의 엔트로피, 엔탈피, 자유에너지 변화량같은 열역학적 함수들을 계산하는데 이용되었다.
        4,000원
        11.
        2019.06 KCI 등재 구독 인증기관 무료, 개인회원 유료
        가속화되는 산업화로 인해 중금속 이온의 침출이 환경문제로 떠오르고 있다. 수질 정화를 위한 몇 가지 방법 중 기능성 고분자 섬유를 이용한 흡착은 효율적이며 경제적이라는 장점이 있다. 특히, 폴리아크릴로나이트릴(polyacrylonitrile, PAN)은 금속 이온을 흡착할 수 있는 작용기가 많아 관심을 끌고 있다. PAN은 쉽게 전기방사를 통해 고분자 나노 섬유화될 수 있으며 높은 표면적을 가질 수 있다. 본 총설에서 다룰 복합 PAN 섬유는 폐수 처리를 위한 또 다른 유형의 고분자이다.
        4,000원
        17.
        2016.11 구독 인증기관·개인회원 무료
        Cellulose acetate-graft-(glycidylmethacrylate-g-polyethylene glycol) (CA-g- (GMA-g-PEG) was synthesized and incorporated into acetylated methyl cellulose (AMC) to prepare high rejection performance ultrafiltration membranes. H1-NMR and X-ray photoelectron spectroscopy study confirmed the successful synthesis of CA-g-(GMA-g-PEG) and utilized for hydrophilic modification agent. Polyethyleneimine(PEI), HumicAcid(HA) and Citric Acid(CA) ligands was used to bind the metal ions in aqueous solution.The rejection efficiency of AMC/CA-g-(GMA-g-PEG) blend membranes was studied in terms of pH, concentration and time. The successful developments would allow the safe and economical advancement in the fabrication of AMC blend membranes for ultrafiltration applications.
        18.
        2009.12 KCI 등재 구독 인증기관 무료, 개인회원 유료
        본 연구의 목적은 중금속 흡착을 위한 방사선 그라프트 중합법에 의한 이온교환막의 성능 향상을 위한 것이다. 그라프트 체인의 이온교환기에 의해 체인이 막의 pore를 방해하여 투과유속이 크게 저하되는 문제를 해결하고자 그라프트 체인과 체인사이를 N-ethyleneglycoldimethacrylate계 가교제를 첨가하여 투과유속이 저하되는 문제를 해결하고자 했다. 이때 사용된 가교제는 길이가 서로 다른 ethylene glycol dimethacrylate (EDMA)와 diethylene glycol dimethacrylate (DDMA)를 사용하였다. GMA 막에 가교제가 첨가된 이온교환막에 술폰산기를 첨가한 막을 이용하여 중금속 이온(Pb2+) 흡착을 하였다. 술폰산기 밀도가 1.40 mmol/g인 EDMA막은 13.82 mg/g을 흡착하였고, 술폰산기 밀도가 2.14 mmol/g인 DDMA막은 17.37 mg/g의 흡착량을 보였다.
        4,000원
        20.
        2006.03 구독 인증기관 무료, 개인회원 유료
        Concerns remain regarding the biocompatibility and adverse effects of dental casting alloys. The aim of this study was to understand the cytopathogenic effect of metal ions, which might be released from dental alloys, on oral squamous carcinoma(OSC) cells. The cellular morphology, viability, the type of cell death and molecular change in response to metal ion salt solutions including aluminum(Al), cobalt(Co), copper(Cu) and nickel(Ni) were examined. The values for the metal ions with the exception of AI were estimated to be between 400 and 600μM. The cells treated with the metal ions showed apoptotic change with the exception of Al ions. Metal ion-induced apoptosis was further confirmed using flow cytometric analysis. This study showed that the cytotoxicity and the mode of cell death by metal ions clearly depend on the cell type, the type of metal ion and the duration of exposure. The protein level of Rb, a tumor suppressor that affects apoptosis para-doxically, was higher in the cells treated with Co, Cu and Ni. It is believed that apoptosis and cell damage in the OSC cells treated with Co, Cu or Ni can be evoked by the regulation of Rb.
        4,000원
        1 2 3