The characteristics of filter/adsorber granular activated carbon (F/A GAC) were investigated by measuring various parameters, which include surface area, pore volume, abrasion number, floater, and water-soluble ash. The correlation between parameters was also evaluated. Moreover, rapid small-scale column test (RSSCT) was conducted for adsorption characteristics. Thirteen F/A GAC were tested, and the average values of abrasion number and water-soluble ash were 88.9 and 0.15%, respectively. F/A GAC with the larger external surface area and greater mesopore volume had the lower abrasion number, which indicated that it was worn out relatively easily. Water-soluble ash of coconut-based GAC (about 2.6%) was greater than that of coal-based GAC (less than 1%), and the pH of solution was increased with GAC, which had the higher water-soluble ash. On the other hand, floater of thirteen F/A GAC was divided as two groups, which one group had relatively higher floater (2.7~3.5%) and the other group had lower floater (approximately 0.5%). The results of RSSCT indicated that coconut-based GAC (i.e. relatively higher water-soluble ash) had less adsorption capacity. Moreover, adsorption capacity of coal-based GAC with larger surface area and greater mesopore volume was superior to others.

Activated carbon (AC) was used as an adsorbent for removal of volatile organic compounds (VOCs). The purpose of this research is to study the effect of acidic treatments of activated carbons on toluene adsorption. The physicalchemical properties of activated carbons were characterized by N2 adsorption-desorption isotherms, temperatureprogrammed desorption (TPD). The adsorption amount of toluene showed an order of S-AC-10% > S-AC-5% > A-AC > AC. It was also found that acid solution pH showed a significant influence on adsorption of toluene. Because strong acid treatment increased the surface oxygen group species of activated carbon, and this group was observed to be the carboxyl acid group by TPD analysis. In addition, the toluene adsorption amount by activated carbon increased with the concentration of H2SO4 solution from 5% to 10%. Adsorption ability of activated carbon surface with toluene is thought to increase as the amount of oxygen group on AC increases.

The adsorption/desorption characteristics of toluene vapors filled with activated carbon(AC) were studied. Adsorption performance of AC was investigated according to flow rate, moisture content, and other factors. The breakthrough time was shortened as the flow rate and moisture content increased. The AC loaded with toluene was regenerated by programmed heating and pressure. AC was regenerated well, as the conditions of heating temperature(80oC) and pressure(100 torr) were appropriate. Toluene is more easily removed at low temperature than through thermal desorption methods. The test of AC regeneration was carried out three times.

Activated carbon fibers(ACFs) were prepared in this research from a polyacrylonitrile(PAN) precursor with the KOH(1~4 M) pretreatment and following activation at 800oC in a lab-scale. The sample ACFs were characterized according to their textural properties, and evaluated for CO2 adsorption capacity. The surface area and pore volume of ACFs increased according to the pretreatment with KOH; for example, 4M-KOH aqueous solution resulted in 1552.5 m2/g specific surface area and 0.605 cc/g pore volume. It also showed high CO2 adsorption amount(3.11 mmol/g) which showed a proportional increase with reaction pressure.

High crystallinity coke-based activated carbon (hc-AC) is prepared using a potassium hydroxide solution to adsorb carbon dioxide (CO2). The CO2 adsorption characteristics of the prepared hc-AC are investigated at different temperatures. The X-ray diffraction patterns indicate that pitch-based cokes prepared under high temperature and pressure have a high crystal structure. The textural properties of hc-AC indicate that it consists mainly of slit-like pores. Compared to other textural forms of AC that have higher pore volumes, this slit-poreshaped hc-AC exhibits higher CO2 adsorption due to the similar shape between its pores and CO2 molecules. Additionally, in these high-crystallinity cokes, the main factor affecting CO2 adsorption at lower temperature is the pore structure, whereas the presence of oxygen functional groups on the surface has a greater impact on CO2 adsorption at higher temperature.

The adsorption of volatile organic compounds (VOCs) was carried out using an activated carbon fiber (ACF) filter in an automobile. The adsorption capacities of formaldehyde, toluene, and benzene on an ACF filter were far better than those of a polypropylene (PP) mat filter and combined (PP+activated carbon) mat filter by batch adsorption in a gas bag. In a continuous flow of air containing toluene vapor through an ACF packed bed, the breakpoint time was very long, the length of the unused bed was short, and sharp "S" -type breakthrough curve was plotted soon after breakpoint, showing a narrow mass transfer zone of toluene on the ACF. The adsorption amount of toluene on the ACF filter was proportional to the specific surface area of the ACF; however, the development of mesopores 2-5 nm in size on the ACF was very effective with regard to the adsorption of toluene. The ACF air clarifier filter is strongly recommended to remove VOCs in newly produced automobiles.

The widespread occurrence of dissolved endocrine disrupting compounds(EDCs) and pharmaceutical active compounds(PhACs) in water sources is of concern due to their adverse effects. To remove these chemicals, adsorption of EDCs/PhACs on granular activated carbon(GAC) was investigated, and bisphenol A, carbamazepine, diclofenac, ibuprofen, and sulfamethoxazole were selected as commonly occurring EDCs/PhACs in the aquatic environment. Various adsorption isotherms were applied to evaluate compatability with each adsorption in the condition of single-solute. Removal difference between individual and competitive adsorption were investigated from the physicochemical properties of each adsorbate. Hydrophobicity interaction was the main adsorption mechanism in the single-solute adsorption with order of maximum adsorption capacity as bisphenol A ≻ carbamazepine ≻ sulfamethoxazole ≻ diclofenac ≻ ibuprofen, while both hydrophobicity and molecular size play significant roles in competitive adsorption. Adsorption kinetic was also controled by hydrophobicity of each adsorbate resulting in higher hydrophobicity allowed faster adsorption on available adsorption site on GAC. EDCs/PhACs adsorption on GAC was determined as an endothermic reaction resulting in better adsorption at higher temperature (40 ◦C) than lower temperature (10 ◦C#x25E6;C).

Activated carbon was prepared from pre-carbonized petroleum coke. Textural properties were determined from studies of the adsorption of nitrogen at 77 K and the surface chemistry was obtained using the Fourier-transform infrared spectrometer technique and the Boehm titration process. The adsorption of three aromatic compounds, namely phenol (P), p-nitrophenol (PNP) and benzoic acid (BA) onto APC in aqueous solution was studied in a batch system with respect to contact time, pH, initial concentration of solutes and temperature. Active carbon APC obtained was found to possess a high surface area and a predominantly microporous structure; it also had an acidic surface character. The experimental data fitted the pseudo-second-order kinetic model well; also, the intraparticle diffusion was the only controlling process in determining the adsorption of the three pollutants investigated. The adsorption data fit well with the Langmuir and Freundlich models. The uptake of the three pollutants was found to be strongly dependent on the pH value and the temperature of the solution. Most of the experiments were conducted at pH 7; the pH(PZC) of the active carbon under study was 5.0; the surface of the active carbon was negatively charged. The thermodynamic parameters evaluated for APC revealed that the adsorption of P was spontaneous and exothermic in nature, while PNP and BA showed no-spontaneity of the adsorption process and that process was endothermic in nature.

Coloured wastewater is released as a direct result of the production of dyes as well as from various other chemical industries. Many dyes and their breakdown products may be toxic for living organisms. Activated carbon is one of the best materials for removal of dyes from aqueous solutions. The present study describes the adsorption behaviour of methylene blue dye on three microporous activated carbons, where two samples (AC-1 and AC-2) were prepared by a polymer blend technique and the other is a microporous activated carbon (ARY-3) sample from viscose rayon yarn prepared by chemical-physical activation. The effects of contact time and activated carbon dosage on decolourisation capacity have been studied. The results show that activated carbon having mixed microporosity and mesoporosity show tremendous decolourisation capacity for methylene blue. In addition, the activated carbon in the powder form prepared by the polymer blend technique shows better decolourisation capacity for methylene blue than the activated rayon yarn sample.

Removal of dyes Reactive Blue 221, N Blue RGB and Acid Blue MTR using two different samples of activated carbon by static batch method was studied. Experimental data on optical density of solutions at different concentrations ranging from 10 to 100 mg/L and of solutions after adsorption on activated carbon samples were measured. Calibration curves were plotted and the amount of dye qe adsorbed was calculated. The data was fitted to Langmuir and Freundlich isotherms for two different carbon samples and different concentration and pH values. Constants were calculated from the slope and intercept values of the isotherms. Coefficient of correlation R2 and Standard Deviation SD were also noted. The data fitted well to the isotherms. Carbon sample C1 showed higher potential to adsorb all the three dyes. Adsorption was higher at lower concentrations. Carbon sample C2 showed better adsorption in acidic pH as compared to in alkaline pH. From the analysis of the data capacity of C1 and C2 to remove the dyes from water have been compared.

The adsorption of Acid Blue 92 onto three low cost and ecofriendly biosorbents viz., cow dung ash, mango stone ash and parthenium leaves ash and commercial activated carbon have discussed in this work. The ash of all the mentioned bio-wastes was prepared in the muffle furnace at 500℃ and all the adsorbents were stored in an air thermostat. Experiments at total dye concentrations of 10~100 mg/L were carried out with a synthetic effluent prepared in the laboratory. The parameters such as pH and dye concentration were varied. Equilibrium adsorption data followed both Langmuir and Freundlich isotherms. The results indicate that cow dung ash, mango stone ash and parthenium leaves ash could be employed as low-cost alternatives to commercial activated carbon in wastewater treatment for the removal of dye.

본 연구에서는 고도정수처리를 위하여 모듈 내부와 관형 세라믹 정밀여과막 외부 사이의 공간에 입상 활성탄(GAC)을 충전한 혼성 모듈을 사용하였다. 정수 원수 중의 자연산 유기물(NOM)과 미세 무기 입자를 대체하기 위해, 휴믹산(humic acid)과 카올린(kaolin) 모사용액을 대상으로 하였다. 혼성공정에서 막오염을 최소화하고 투과선속(J)을 향상시키기 위하여 10분 주기로 10초 동안 질소 역세척을 시행하였다. 그 결과, 휴믹산의 농도가 10 mg/L부터 2 mg/L로 단계적으로 변화시킴에 따라 막오염에 의한 저항(Rf)이 감소하고 J가 증가하여 2 mg/L에서 가장 높은 총여과부피(VT)를 얻을 수 있었다. 한편, 탁도 및 UV254 흡광도의 처리효율은 각각 99.36% 및 97.19% 이상으로 우수하였으나, 휴믹산의 농도 10 mg/L에서 활성탄 주입 없이 정밀여과 단독으로 UV254 흡광도의 처리효율은 90.84%로 다소 감소하였다.

본 연구에서는 고도정수처리를 위하여 모듈 내부와 관형 세라믹 정밀여과막 외부 사이의 공간에 입상 활성탄(GAC)을 충전한 혼성 모듈을 사용하였다. 정수 원수 중의 자연산 유기물(NOM)과 미세 무기 입자를 대체하기 위해, 휴믹산(humic acid)과 카올린(kaolin) 모사용액을 대상으로 하였다. 혼성공정에서 막오염을 최소화하고 투과선속(J)을 향상시키기 위하여 역세척 시간(BT)과 역세척 주기(FT)에 따른 영향을 알아보았으며, 최적운전조건을 규명하고자 하였다. 그 결과, BT가 증가함에 따라 Rf 다소 감소하는 경향을 보였으며, 더 짧은 FT는 빈번한 역세척으로 Rf의 감소와 J의 향상에 더 효과적이었다. 그러나 운전비용을 고려하였을 때, 최적 BT 및 FT는 각각 10초와 8분이었다. 한편, 모사용액으로 실험하여 도출된 최적 운전조건을 호소수의 고도정수처리에 적용하였다. 그 결과, 탁도 및 UV254 흡광도, CODMn의 평균처리효율은 각각 99.11% 및 91.40%, 89.34%로 우수하였으나, TDS의 평균처리효율은 30.05%로 낮았다.

본 연구에서는 관형보다 단위시간당 투과량이 월등히 많은 다채널 세라믹 분리막을 사용하였으며, 고도정수처리 혼성공정은 모듈 내부와 다채널 정밀여과막 외부 사의의 공간에 입상활성탄(GAC)을 충전하여 구성하였다. 정수 원수 중의 자연산 유기물(NOM)과 미세 무기 입자를 대체하기 위해, 휴믹산(humic acid)과 카올린(kaolin) 모사용액을 사용하였다. 유기물질의 영향을 살펴보기 위해 일정한 30mg/L의 카올린 농도에서 휴믹산(humic acid)의 농도를 2~10 mg/L로 변화시켰다. 그 결과, 막오염의 저항(Rf)과 투과선속(J)은 휴믹산의 농도에 따라 큰 영향을 받았다. 또한 역세척 주기(FT)의 영향을 살펴본 결과, 더 짧은 FT는 빈번한 역세척으로 막오염의 감소와 투과선속의 향상에 더 효과적이었다. 그러나 운전비용을 고려하면, 최적 FT조건은 8분이였다. 한편, 이 다채널 정밀여과막 및 GAC 혼성공정을 호소수에 적용한 결과, 평균 처리효율은 탁도 98.02%, UV254 흡괌도 75.64%, 총용존고형물(TDS) 7.18%, 화학적산소요구량 84.73%이었다.

The objective of this work is to study the feasibility of the preparation of the activated carbon (AC) from coconut tree flowers using high temperature fluidized bed reactor (HTFBR). The activating agent used in this work is steam. The reactor was operated at various activation temperature (650, 700, 750, 800 and 850℃) and activation time (30, 60, 120 and 240 min) for the production of AC from coconut tree flowers. Effect of activation time and activation temperature on the quality of the AC preparation was observed. Prepared AC was characterized in-terms of iodine number, methylene blue number, methyl violet number, ethylene glycol mono ethyl ether (EGME) surface area and SEM photographs. The best quality of AC from coconut tree flowers (CFC) was obtained at an activation temperature and time of 850℃ and 1 hr restectively. The effectiveness of carbon prepared from coconut tree flowers in adsorbing crystal violet from aqueous solution has been studied as a function of agitation time, carbon dosage, and pH. The adsorption of crystal violet onto AC followed second order kinetic model. Adsorption data were modeled using both Langmuir and Freundlich classical adsorption isotherms. The adsorption capacity qm was 277.78 mg/g., equilibrium time was found to be 180 min. This adsorbent from coconut tree flowers was found to be effective for the removal of CV dye.

본 연구에서는 고도정수처리를 위하여 모듈 내부와 세라믹 정밀여과막 외부 사이의 공간에 입상 활성탄(GAC)을 충전한 혼성 모듈을 이용하였으며, 정수 원수 중의 자연산 유기물(NOM)과 미세 무기 입자를 대체하기 위해, 휴믹산(humic acid)과 카올린(kaolin) 모사용액을 사용하였다. GAC의 충전율(packing fraction)에 따른 처리효율의 변화를 알아보고자. GAC의 충전율을 0~24.05%로 변화 시켰다. 그 결과, 3시간 운전하는 동안 막오염에 의한 저항(Rf) 및 투과선속(J)의 변화 곡선은 GAC의 충전율에 관계없이 거의 중첩되었다. 그리고 탁도의 처리효율은 모든 조건에서 99.46% 이상으로 높았으며, UV254 흡광도로 측정한 NOM의 처리효율은 최대 충전율 24.05%에서 제거율은 99.43%로 가장 높게 나타났다. 한편, 충전율 24.05%에서 13시간 동안 운전한 결과, J는 막오염의 증가에 따라 운전 초기 1시간 이내에 급격히 감소하였으며 3시간 운전 후부터는 거의 일정한 투과선속을 나타냈다. 그리고 탁도 및 NOM의 처리효율은 각각 99.52%와 96.63%로 안정적인 높은 처리효율을 보였다.

Activated carbons were obtained by activating wild cherry stones with different concentrations of phosphoric acid or zinc chloride at different temperatures. The adsorption of N2 at 77 K and of CO2 at 273 K was followed and the data were analyzes by considering different adsorption models. The activated carbons obtained measured high surface area with the most of the surface in all samples located in micropores. Fair agreement was found between the nitrogen surface areas calculated from the BET-, t-, α- and DR- methods, although the first three are based on surface coverage whereas the latter is based on micropore filling. The carbon dioxide surface areas calculated by the DA equation were smaller than the comparable nitrogen areas. This was ascribed to domination of surface coverage mechanism, the absence of activated diffusion process. Based on this explanation the CO2-surface areas as calculated by DA equation should be taken with great reservation.

폐기물 용액의 pH 변화에 따른 고정층에서 우라늄 및 코발트 이온의 흡착거동을 다성분 흡착시스템으로 가정하여 이론적으로 예측하였다. 즉 pH 변화에 따라 존재 분율이 달라지는 각 이온 성분들이 상호 경쟁적으로 흡착한다는 가정 하에서, 평형실험에서 얻어진 결과와 우라늄 및 코발트 이온의 용액특성 (Solution chemistry)을 상호 결합하여 각 이온 성분들의 Langmuir 평형상수 값을 Ideal Adsorbed Solution Theory를 도입하여 구하였으며, 이상의 결과를 이용하여 고정층 파과곡선을 이론적으로 계산한 결과 pH 변화에 따른 흡착거동을 비교적 잘 예측할 수 있었다 따라서 본 연구에서 시도한 방법은 이온 농도와 pH가 높은 경우를 제외하고 pH 변화에 따라 용액 내에 이온의 형태가 다양하게 존재하는 흡착 시스템을 이론적으로 예측하는 데 비교적 유용하게 사용할 수 있을 것으로 판단된다.