Adsorption of phenol on activated carbon in a fixed bed was studied. The effects of fixed-bed length, superficial velocity (flow rate) and particle size of adsorbent on fixed-bed performance were investigated. Some characteristic parameters such as the breakthrough time (t0.05), saturation time (t0.95), length of mass transfer zone (LMTZ), adsorptive capacity (W), and adsorption rate constant (Ka) were derived from the breakthrough curves. Adsorbent particle sizes significantly affected the shape of the breakthrough curve. Larger particle sizes resulted in an earlier breakthrough, a longer LMTZ and a lower adsorption rate. Superficial velocity was a critical factor for the external mass transfer during fixed-bed adsorption process. The external mass transfer resistance was dominant as increasing superficial velocity.

There have been a lot of efforts to increase recycling rate by more utilization of end of life vehicles (ELVs) in Korea.The target of recycling rate was set to 85% until 2014 and 95% after 2015 with including up to 10% of energy recovery,according to the law of “regulation about resource recycling of electrical and electronic products and automobiles”.Therefore, to achieve 95% of recycling rate by the year of 2015, the automobile and recycling industries should developan innovative technology to treat automobile shredder residues (ASRs) by efficient means of reduction or conversion toenergy, which were generated as final left-over after recovering all the valuables from ELVs. As one of the options toconvert to energy forms, the gasification of them was proposed. In this study the gasification experiment was performedusing ASRs at fixed-bed reactor with a capacity of 1kg/hr, at different temperatures of 800, 1,000 and 1,200oC, and atequivalence air ratios ranging from 0.1 to 0.5. The syngas (H2+CO) yield from ASR gasification experiment was obtainedup to 86% in maximum and about 40% in minimum in the experimental conditions given. There was a trend that theamount of syngas increased with elevated temperatures and the calorific value also showed similar trend with syngasproduction.

According to the statistics of the Ministry of Environment, the emission of sewage sludge is increased by 7 ~ 9% yearly. In the future, it will be increased continuously because of extension of sewage disposal plants, high class treatment for removing nitrogen and phosphorus. The objective of this study is to examine the possibility of the carbonization of the sewage sludge by pyrolysis. The pyrolysis behavior of the sewage sludge was investigated by the thermogravimetric analysis as a function of heating rate. In the pyrolysis studies measurements in weight loss was made and reported as a function of test temperature. To minimize energy consumption used for drying sewage sludge, naturally dried sludge were applied evaluate characteristics of thermal and carbonization treatment using a fixed-bed reactor. The most effective treatment temperature of carbonized material production was 400oC. The temperature of highest total yield of char and oil was 500oC. In the pyrolysis studies measurements in weight loss was made and reported as a function of test temperature. According to the result, the optimum pyrolysis temperature of sewage sludge were found to be ranged from 100oC to 600oC, respectively. About 91% of pyrolysis was completed between 100oC and 600oC. If applying the carbonization, it can be easily utilized as the replaced resource of energy(fuel) in the countries whose energy resources are insufficient, like our country.

Gasification, one of the thermo-chemical conversion technologies, has been known and researched for the conversion of low graded solid feedstock to gaseous form of fuel. Gasification for obtaining high-valued combustible gas such as hydrogen and carbon monoxide has been focused again due to high oil price with needs of alternative energy. And the gaseous product, known as synthesis gas (syngas) can be effectively utilized in a variety of ways ranging from electricity production to chemical industry. Gasification and melting processes are also operated at high temperatures with the destruction of hazardous components and production of gases, mainly CO and H2, which can be utilized as fuel gas or raw chemicals after cleaning. In this study, sawdust was experimented on in a lab-scale gasification process in order to characterize the gaseous products. At isothermal conditions at a fixed temperatures (800, 1000, 1200oC), the concentrations of CO, H2 and CH4 increased but CO2 and N2 decreased with lower equivalent ratio (ER). C2H6 concentration was varying and not depending upon ER. Carbon conversion efficiency, gas and tar yields increased with increasing ERs. Tar yield was related to carbon conversion efficiency and gas yield.

The vertical distributions of nitrifying bacteria in aerobic fixed biofilm were investigated to evaluate the relationship between nitrification performance and microbial community at different HRT. Fluorescent in situ hybridization (FISH) and portable ion selective microelectrode system were adopted to analyze microbial communities and ions profiles according to the biofilm depth. Cilia media packed MLE (Modified Ludzack-Ettinger) like reactor composed of anoxic, aerobic Ⅰ/Ⅱ was operated with synthetic wastewater having COD 200 mg/L and NH4 +-N 40 mg/L at HRT of 6 hrs and 4 hrs. Total biofilm thickness of aerobic Ⅰ, Ⅱ reactor at 4 hrs condition was over two times than that of 6 hrs condition due to the sufficient substrate supply at 4 hrs condition (6 hrs; aerobic Ⅰ 380 ㎛ and Ⅱ 400 ㎛, 4 hrs; aerobic Ⅰ 830 ㎛ and Ⅱ 1040 ㎛). As deepen the biofilm detection point, the ratio of ammonia oxidizing bacteria (AOB) was decreased while the ratio of nitrite oxidizing bacteria (NOB) was maintained similar distribution at both HRT condition. The ratio of AOB was higher at 4 hrs than 6 hrs condition and NH4 +-N removal efficiency was also higher at 4 hrs with 89.2% than 65.4% of 6 hrs. However, the ratio of NOB was decreased when HRT was reduced from 6 hrs to 4 hrs and NO2 --N accumulation was observed at 4 hrs condition. Therefore, it is considered that insufficient HRT condition could supply sufficient substrate and enrichment of AOB in all depth of fixed biofilm but cause decrease of NOB and nitrite accumulation.

Adsorption experiments of binary mixed gases composed of acetone/methylethylketone (MEK), MEK/benzene, MEK/toluene, and benzene/toluene were carried out on activated carbon fixed-bed. The variations of equilibrium adsorption capacity according to type and fraction of binary gas were investigated. In case of binary gases composed of acetone/MEK and benzene/toluene, equilibrium adsorption capacities of MEK and toluene were increased according to the increase of fraction of MEK and toluene, but equilibrium adsorption capacities of acetone and benzene were decreased. In case of binary gases composed of MEK/benzene and MEK/toluene, equilibrium adsorption capacities of benzene and toluene were increased according to the increase of fraction of benzene and toluene, but equilibrium adsorption capacities of MEK was decreased.

The adsorption experiment of phenol(Ph) from aqueous solution on granular activated carbon was studied in order to design the fixed-bed adsorption column. The experimental data were analyzed by unsteady-state, one-dimensional heterogeneous model. Finite element method(FEM) was applied to analyze the sensitivity of parameter and to predict the fixed-bed adsorption column performance on operation variable changes. The prediction model showed similar effect to mass transfer and intraparticle diffusion coefficient changes suggesting that both parameter present mass transfer rate limits for GAC-phenol system. The Freundlich constants had a greater effect than kinetic parameters for the performance of fixedbed adsorption column. FEM solution facilitated prediction of concentration history in solution and within adsorbent particle.

The objectives of this study are to examine combustion characteristics of E.V.A. and rubber wastes by fixed-bed incinerator. The results are as follows. Combustion temperature with time rises rapidly, and mass of E.V.A. reduces at short time in E.V.A. combustion. In variation of air-fuel ratio (m), the ideal values of m of E.V.A. and rubber are 2.5, 1.5 respectively. Mixed-waste combustion is more economic than single E.V.A. combustion, because we can get high combustion efficiency (94.0∼99.0%) at 2.0 air-fuel ratio of mixed-waste combustion. Removal efficiencies of SO2 at cooling tower are about 20%. The combustion efficiencies of rubber are over 98.0% according to the experimental conditions.