Vacuum kinetic spray(VKS) is a relatively advanced process for fabricating thin/thick and dense ceramic coatings via submicron-sized particle impact at room temperature. However, unfortunately, the particle velocity, which is an important value for investigating the deposition mechanism, has not been clarified yet. Thus, in this research, VKS average particle velocities were derived by numerical analysis method(CFD: computational fluid dynamics) connected with an experimental approach(SCM: slit cell method). When the process gas or powder particles are accelerated by a compressive force generated by gas pressure in kinetic spraying, a tensile force generated by the vacuum in the VKS system accelerates the process gas. As a result, the gas is able to reach supersonic speed even though only 0.6MPa gas pressure is used in VKS. In addition, small size powders can be accelerated up to supersonic velocity by means of the drag-force of the low pressure process gas flow. Furthermore, in this process, the increase of gas flow makes the drag-force stronger and gas distribution more homogenized in the pipe, by which the total particle average velocity becomes higher and the difference between max. and min. particle velocity decreases. Consequently, the control of particle size and gas flow rate are important factors in making the velocity of particles high enough for successful deposition in the VKS system.

산업의 빠른 발전 속도에 따라 연구 개발도 함께 발전해야 한다. 따라서 현재 제조공정에 대한 품질 특성치의 분석방법으로 공정 모수의 작은 변화도 쉽게 탐지를 할 수 있는 EWMA 관리도와 Shewhart 관리도보다 공정 변화에 민감하게 탐지 가능한 CUSUM 관리도에 관한 연구가 많이 이루어지고 있다. 하지만 식스시그마 공정관리에 맞춘 평균, 불량률, 미세 분산을 동시에 감지할 수 있는 동시 관리 체계 연구는 많이 미흡하다. 본 연구에서는 기존의 CUSUM, EWMA 관리도 기법보다 빠른 이상 감지를 위해서 평균, 불량률, 분산 3가지가 동시에 관리되어질 수 있도록 Zp-s 관리도를 소개한다. Zp-s 관리도는 ARL을 통해 기존 관리도보다 민감함을 확인할 수 있다.

지난 몇 십년동안 전 세계적으로 제조기술 분야의 급속한 성장으로 대부분의 제조업에서 눈부실만한 품질향상과 생산성 극대화를 이루어 왔다. 하지만 현재 제조기술 분야는 새로운 문제에 직면하고 있다. 실제 현장에서 관리하고자하는 품질특성은 정규분포를 따르지 않는 경우가 많은데, 대부분의 통계적 공정관리기술체계가 정규분포를 기반으로 하고 있다는 것이다. 이러한 이유로 비정규 공정에서 극소불량관리, 미세변동관리에 대한 연구가 시급한 실정이다. 하지만 비정규 분포를 통계적으로만 해석하고 설계하기 위해서는 현실적으로 한계가 있으며, 경제적 설계의 접근방법이 또 하나의 좋은 대안이 될 수 있다. 본 논문에서는 비정규 공정에서 관리도의 경제적 설계를 위한 연구동향을 살펴보고 추후 연구방향에 대해 제시하고자 한다.

Control chart is most widely used in SPC(Statistical Process Control), Recently it is a critical issue that the standard control chart is not suitable to non-normal process with very small percent defective. Especially, this problem causes serious errors in the reliability procurement, such as semiconductor, high-precision machining and chemical process etc. Procuring process control technique for non-normal process with very small percent defective and perturbation is becoming urgent. Control chart technique in non-normal distribution become very important issue. In this paper, we investigate on research trend of control charts under non-normal distribution.

이 논문은 미세공정변동에서 극소불량을 감지하는 관리도의 경제적 설계를 개발하기 위한 조사연구이다. 일반적인 관리도의 설계는 통계적 설계와 경제적 설계로 구분할 수 있다. 공정의 변동 원인에 따라 샘플의 간격(h), 샘플의 크기(n), 관리한계선(k) 등의 설계 모수를 최적접근방법으로 결정을 하는 경제적 설계의 모델을 조사하였다. 관리도의 경제적 설계는 공정의 관리이상상태를 효율적으로 감지하여 관리상태로 정상화 시키는 것에 대한 공정의 개선비용과 기대품질비용을 절약 할 수 있는 최적설계 방안이다. 그리고 Shewhart 관리도의 X-bar 통계량으로 극소불량을 검출 하는것에 한계가 있기 때문에 Zp 통계량과 분포를 설계하여 극소불량을 빠르게 감지할 수 있는 Zp 관리도의 설계를 적용하고, 미세공정변동을 정확하게 감지할 수 있는 CUSUM 관리도를 동시에 적용하였다. 따라서, 미세공정변동과 극소불량을 동시에 관리 할 수 있는 Zp-CUSUM 관리도의 통계적 설계 구조를 체계화 하였으며, 기존의 경제적 설계의 모델을 비교 분석하여 새로운 경제적 설계에 대한 모델을 제안하고자 한다.

공정제어시스템과 같은 복잡한 시스템을 감시하고 제어하기 위한 정보 디스플레이를 설계하기 위해 두 가지의 세부적인 설계문제를 효과적으로 다루어야 한다. 정보디스플레이에서 표현할 정보의 내용을 파악하고 조직화하는 문제와 그 표현할 정보를 시각적으로 잘 표현하는 문제로 구분이 된다. Ecological Interface Design (EID)는 두 문제를 다루기 위한 이론적 배경지식과 방법을 제공하는 정보디스플레이 설계의 틀이다. EID는 1990년대 초반에

In the manufacturing process the most widely used x chart has been applied to control the process mean. Also, Accelerated Life Test(ALT) is commonly used for efficient assurance of product life in development phases, which can be applied in production reliability acceptance test. When life data has lognormal distribution, through censored ALT design so that censored ALT data has asymptotic normal distribution, ALTx control chart integrating x chart and ALT procedure could be applied to control the mean of process in the manufacturing process. In the situation that process variation is controlled, Zp control chart is an effective method for the very small fraction nonconforming of quality characteristic. A simultaneous control scheme with ALTx control chart and Zp control chart is designed for the very small fraction nonconforming of product lifetime.

우리나라 헌법은 “누구든지 법률에 의하지 아니하고는 체포·구속·압수·수색 또는 심문을 받지 아니하며, 법률과 적법한 절차에 의하지 아니하고는 처벌·보 안처분 또는 강제노역을 받지 아니한다.”고 하여(제12조제1항) 형사절차에 관하여 적법절차의 원칙을 천명하고 있다. 이 원칙은 입법작용, 행정작용 그리고 사법적용 전반에 걸쳐 적용되는 독자적인 헌법원리로서 특히 인권침해소지가 큰 형사절차에서 엄격하게 적용될 것이 요구되고 있다. 그동안 수사절차와 재판절차에서는 적법절차원칙이 비교적 엄격하게 적용되어 왔으나 형집행절차에서 법원은 부과되는 형벌이나 보안처분의 종류와 양만을 결정할 뿐 구체적인 집행은 행정부에 일임하고 있고, 그 집행의 과정에서 발생하는 각종 인권침해에 대한 사후적 구제에 있어서도 법원의 역할은 미미하였다. 이에 반하여 독일과 프랑스는 형집행의 과정상 중요한 결정을 법원이 직접할 뿐만 아니라 형집행과정에서의 인권침해를 구제하기 위한 전문기관으로서 형집행법원 내지 형집행법관제도를 운용해 왔다. 최근 우리나라는 성폭력범죄대책의 일환으로 성범죄자 신상정 보공개, 치료감호, 위치추적 전자장치(전자발찌), 성충동 약물치료(화학적 거세) 등 자유제한적 보안처분제도를 속속 도입하였고 최근 법무부는 (구)사회보호법 상의 보호감호를 보호수용이라는 명칭으로 재도입하는 것을 내용으로 하는 형법개정작업을 진행 중이다. 본 논문은 이와 같은 상황에서 독일과 프랑스의 입법례를 소개·검토하고, 이를 토대로 적법절차의 관점에서 형집행에 대한 사법적 통제를 강화하기 위한 방안의 일환으로 가석방 등 형집행과정상 중요한 결정을 법원의 권한으로 옮기고 나아가 형집행법원·형집행법관과 같은 사법심사제도를 도입할 것을 주장한다.

Autoregressed Controller, which have trend algorithm, seeks to minimize variability by transferring the output variable to the related process input variable, while multivariate process control techniques seek to reduce variability by detecting and eliminating assignable causes of variation. In the case of process control, a very reasonable objective is to try to minimize the variance of the output deviations from the target or set point. We also investigate algorithm with relevant Shewhart chart, Theoretical control charts, precontrol and process capability. To help the people who want to make the theoretical system, we compare the main techniques in "a study on the relation between multivariate process control techniques and trend algorithms".

Control chart is most widely used in SPC(Statistical Process Control), Recently it is a critical issue that the standard control chart is not suitable to non-normal process with very small percent defective. Especially, this problem causes serious errors in the reliability procurement, such as semiconductor, high-precision machining and chemical process etc. Procuring process control technique for non-normal process with very small percent defective and perturbation is becoming urgent. Control chart technique in non-normal distribution become very important issue. In this paper, we investigate on research trend of control charts under non-normal distribution with very small percent defective and perturbation, and propose some variable-transformation methods applicable to CUSUM control charts in non-normal process.

This paper presented experimental results for circulation type UV-TiO₂ photocatalytic oxidation process. We have developed UV-TiO₂ photocatalytic oxidation process with activated carbon to control odor and VOCs in indoor and industrial applications. In this study, common indoor air pollutants, namely ammonia, formaldehyde, hydrogen disulfide, toluene were selected to investigate their efficiencies for UV-TiO₂ photocatalytic oxidation. In high concentration test, the decomposition efficiency was high in order as ammonia, toluene, formaldehyde, hydrogen disulfide. Three type of individual processes are tested for ability to increase decomposition efficiency. UV-TiO₂ photocatalytic oxidation combined process with activated carbon was excellent among the three type processes without reference to gas species. It was considered that this circulation type process will overcome short retention time for treatment for UV-TiO₂ photocatalytic oxidation. It will promise that this circulation type UV-TiO₂ photocatalytic oxidation combined process can apply indoor and industrial applications to remove odor and VOCs quickly.

It is presumable that properly designed earcons given simultaneously with visual information could enhance the situation awareness of operators when they are involving in highly complicate process control activities. In this study, population stereotypes of earcons with respect to process control information were identified using 60 Korean subjects. To do this, 11 most distinctive earcons were selected from various earcons having different pitch, rhythm, and timbre. Associations between the selected earcons and 40 pairs of adjectives used to describe the state of control in process were gathered from 37 subjects using a semantic differential method. Based on the results from multivariate analyses, the 40 pairs of adjectives were aggregated into three distinctive semantic dimensions. The emotional maps of the 11 earcons matched with the semantic dimensions were presented in this study. On the basis of these results, a general guideline was suggested for designing earcons to deliver process control information.

This study looks at a company which introduced SAP program, one type of ERP systems, and how the firm copes with the problems which happen in business process. The research tried to solve the problem by IDEAL method of process software improvement methodo

The study investigates the various Acceptance Control Charts (ACCs) based on the factors that include process independence, data weighting scheme, subgrouping, and use of control charts. USL - LSL 〉 6Σ that used in the good condition processes in the ACCs are designed by considering user's perspective, producer's perspective and both perspectives. ACCs developed from the research is efficiently applied by using the simple control limit unified with APL (Acceptable Process Level), RLP (Rejectable Process Level), Type I Error α, and Type II Error β. Sampling interval of subgroup examines i.i.d. (Identically and Independent Distributed) or auto-correlated processes. Three types of weight schemes according to the reliability of data include Shewhart, Moving Average(MA) and Exponentially Weighted Moving Average (EWMA) which are considered when designing ACCs. Two types of control charts by the purpose of improvement are also presented. Overall, α, β and APL for nonconforming proportion and RPL of claim proportion can be designed by practioners who emphasize productivity and claim defense cost.

Because sampling interval for data collection tends to be short compared with the overall processing time, in chemical process, instrumental process related tanks or furnace collected data have a significant autocorrelation. Insufficient control technique

In this work, effect of various process-control agents (PCAs) on the mechanical alloying of amorphous alloy of has been investigated. The dependence of the particle shape, size and crystallization behavior of the amorphous alloy powders on the type of PCAs and their concentrations was investigated by using X-ray diffraction, field-emission scanning electron microscopy and differential scanning calorimetry. It was found that the additive of toluene could affect positively the amorphization and thermally induced crystallization processes, as well as the size refinement, morphology and particle-size distribution of as-milled powders in comparison with alloy obtained without PCA.

Mg-Cu composites were successively fabricated using a combination of rapid solidification and extrusion processes. In addition, the microstructural variation of the composite was investigated by performing the extrusion repeatedly. It resulted that the composite formed an uniform and dense structure by the extrusion, and the microstructure became fine as the extrusion conducted repeatedly. The microstructural variation was known to be dependent on the number of extrusion and the area reduction ratio. The tensile strength was also measured as a function of the microstructural variation.

The purpose of this paper is to give information on e-CPC implementation in the manufacturing industry by studying and analyzing a small and medium sized manufacturing company. After analyzing Various factors on J’s e-CPC implementation such as environmen

It is an important and urgent issue to improve process capability in quality control. Process capability refers to the uniformity of the process. The variability in the process is a measure of the uniformity of output. A simple, quantitative way to express process capability, the degree of variability from target in specification is defined by process capability index(PCI). Almost process capability indices are defined under normal distribution. However, these indices can not be applied to the process of non-normal distribution including reliability. We investigate current research on the process of non-normal distribution, and advanced method and technology for developing more reliable and efficient PCI. Finally we suggest the perspective for future study.

  Ultra-high voltage transformer industry has characteristic of small quantity batch production system by other order processing unlike general mass production systems. In this industry, observance of time deadline is very important in market competitive