The field test was conducted for the shotcrete construction using a slurry-type accelerator. Check the efficiency of the equipment and the accelerator was determined using the discharge amount for the accelerator ratio optimization. As a result, the efficiency of a slurry quick-setting admixture mix shotcrete and discharge rate results were evaluated to be excellent.

This study carried out field test construction by slip-form method with on site concrete batch, The results show that slip form method is good at the Quality assurance and constructability of L tyoe curbs and gutters but it is difficult for Quality control.

In this study, the field construction with the prefabricated lightweight plastic foundation using recycled plastic forsewage pipeline and triple wall PE sewer pipe was carried out to verify the construction workability of prefabricated plasticfoundation and deformation resistance potential of triple wall PE sewer pipe. The construction procedure in field wasfollowed the KS standard. The measured vertical deformations of PE pipe are average 2.35mm which means around 1%of deformation for 300mm diameter of PE pipe. Judging from the type of foundation, the use of plastic foundation (CaseB & Case C) showed lower deformation due to differential settlement than that of sand bedding foundation. Especially,the plastic foundation made a relatively uniform deformation of PE pipe. However, the sand foundation represented thenon-uniform deformation of PE pipe.

This research was performed to evaluate applicability of cold-mix recycling asphalt concrete, which was modified during recycling process. A maximum size of 25mm reclaimed asphalt pavement(RAP) was used in cold-recycle process together with an asphalt emulsion and recycled inorganic binder as a binder.

This study carried out test construction of fiber reinforced lean concrete for composite pavement system. Sensors were installed in order to measure temperature, humidity, and strain at 3cm and 12cm depth from surface. The measured results revealed that temperature variation of variables were similar each other at same depth

Since 2007, Korea Institute of Construction Technology (KICT) have developed UHPC (Ultra High Performance Concrete). In recent years, the bridge with the UHPC ribbed deck developed by KICT was demonstrated in site and measured by optic sensors.

무가선 저상트램은 친환경 고효율 교통수단으로서 저렴한 건설비, 도시 미관의 개선, 도시 주변 지역 활성화 및 승객 편의성 확보 등의 장점을 보유한 신교통 수단으로 10개 이상의 지역단체에서 도입을 검토 중에 있다. 이에 따라 무가선 저상트램 차량과 노면선로 및 도로교통과 복합된 신호시스템의의 개발, 인프라시스템 구축을 위한 연구가 활발히 진행 중에 있다. 무가선 저상트램 노면선로 중 도심지 구간에서는 레일이 노면에 매립되는 매립형궤도 시스템이 적용되고 있다. 매립형궤도 시스템은 소음 진동의 저감, 공기 단축 및 유지보수 최소화 등의 장점을 보유한 것으로 알려져 있다. 이에 본 논문에서는 국내에서 시공사례가 전무한 매립형궤도 시스템을 설계하여 시험시공을 수행하였고 시공과정에서 발생한 문제점을 파악하였다. 또한 시험선 완공 후 진동과 소음을 일반 자갈도상궤도와 비교 측정하여 매립형궤도 시스템의 소음 진동 저감 성능을 정략적으로 분석하였다.

The innovative and environment-friendly tram vehicle and it’s trackway system are developed based on the government’s R&D funding. Accordingly, in order for the test drive of developed vehicle, a tram trackway as test-bed, is being constructed in Osong, where is located inside Korea Rail Network Authority in Chungcheongbuk-Do. In this paper, the construction method of trackway for wireless and low-floored tram vehicle is introduced for the first time in Korea.