This paper shows examples of damage cases for corrugated steel plate structures in Korea expressway. There are two representative types of damages. One is a water leak and the other is the deformation of inner section. The results of this study will be useful for future maintenance of corrugated steel plate structures.

In this study, measurement temperature in the bridges was compared with temperature proposed by Korean design code. In addition, the structural analysis was performed in order to comparing the stress by measured thermal load and the stress by design thermal load. As a result, the stress that applied measurement temperature was evaluated larger than the stress that applied temperature proposed by Korean design code.

The purpose of this study is to analyze the trend of domestic and foreign steel plate shear wall (SPSW) systems. The investigated countries were three, such as Korea, Canada, and U.S. The full scale or scale down specimens were preponderantly investigated. The details and performances of all specimens were compared for each other.

The use of steel deck-plate has continuously increased in slab construction because of efficiency of construction-ability. Slab member is not only resisting the loads but sensitive the deflection. Generally, steel deck-plate slab has higher equivalent moment of inertia than normal RC slab because of its bottom steel plate. In this study, stiffness variation of the various slab was experimentally examined.

This paper presents the results of an experimental test conducted subjected to blast loading of steel plates. An experimental results were compared with the simulation result derived in AUTODYN to validate the simulation method used in this study.

The result of structural performance evaluation about circular CFT column-H shape steel beam which was performed as in previous study, even though we designed the Y type plate tension as below the axial force which was under design criteria, the flexure of steel beam was happened. For these reasons, in this study, to figure out the time of connections failure and the minimum value of parameters in order to evaluate the performance of advanced Y type plate in detail.

이 연구에서는 SC 전단벽의 전단 연결재인 스터드의 배치와 형상이 SC 전단벽의 거동에 미치는 영향을 살펴보기 위해 전단벽체가 반복의 전단하중을 받을 때의 거동을 해석적으로 검토하였다. 이를 위해 서로 다른 배치간격과 형상의 스터드가 배열된 SC 전단벽을 대상으로 유한요소해석을 수행하였다. 그 결과, 하중-변위이력곡선으로부터 스켈레톤 곡선을 얻었고 스터드의 간격이 좁을수록 극한강도 및 항복강도가 크게 나타남을 확인했다. 또한, 일반 스터드 보다 경사부재가 있는 경사 스터드의 강도가 더 크게 나타났고 강성비가 줄어들수록 감쇠비가 증가함을 확인했다. 최종적으로 스터드의 간격이 좁을수록 누적손상에너지가 크게 나타나며 내진성능이 우수함을 확인하였다.

After reviewing the technical consulting reports and field surveying the whole corrugated steel plate structures in the Expressway, factors causing the problems are analyzed suggestions for the improvement of the design and construction of the structures are given.

This paper presented to study used Abaqus on steel plate bonded reinforcement technology for column to beam connections, and then the result showed that steel plate bonded reinforcement technology has great reinforcement effect for RC column to beam joint. Also the steel plate bonded reinforcement technology was safety and convenient operation.

This study analytically reviewed the dissipated energy and ductility of Steel Plate Concrete (SC) walls subjected to cyclic shear forces to investigate the effects of shape and arrangement spacing of studs on the design of SC walls. As the decrease of stud spacings, the cumulative dissipate energy was increased and the seismic performance was improved. Under the same cumulative dissipate energy, the ductility was increased as the increase of stud spacings and the influences with stud type was insignificant.

Based on AISC Design Guide-#1, limit-state function of steel column-base plate connection is defined. Comparison with test and numerical result, this method acculately predicts bending moment capacity of this connection.

This study analytically reviewed the behavior of Steel Plate Concrete(SC) walls subjected to combined loads of axial force, flexural moment, and shear force to investigate the effects of shape and arrangement spacing of studs on the behavior of SC walls. To perform it, 9 cases of finite element analyses considering the different shape and spacing of studs in SC wall were carried out. The results showed that, for SC walls combined steel plate and concrete according to the Design Code, the compressive strength is higher than the tensile strength. Compared results from the finite element analyses of SC walls subjected to combined loads with Design Code showed that all cases were higher than the design strength. For KEPIC SNG, the moment and shear force were not influenced by the axial force of 0.1 to 0.2 times axial strength, however, from the analyses, it was found that the values were decreased as the axial force is increased.

In this paper, the RC column-based joint connection part carry out loading test by reinforced hollow or extended Base Plate in order to confirm that RC joint punching shear reinforcement effect of applying the Base Plate. Base Plate thickness, extension length, size, and type as the variable, Base Plate suitable for the stress distribution and shape and dimensions confirmed through experiment and then reinforcing effect was analyzed. Experimentally, vertical load transmitted to the Base Plate from column to foundation is effective to stress distribution and then, type of hollow reinforcement more efficient than a closed. Through experiment, improve performance and ductility due to reinforcement and relative to the thickness of the existing foundation reduced even showed better performance than the existing. The behavior of the reinforced specimens be able to induce from brittle to ductile. Experiment on loading to destroy performed the pattern of cracks, destruction aspect before and after reinforcement.

본 연구는 정현형 주름과 마름모형 주름 형상의 전단좌굴 특성을 비교, 분석하는 것이 목적이다. 이를 위해서 동일한 길이의 마름모꼴주름과 정현파주름을 해석대상모델로 채택하였으며, 선형좌굴해석을 통한 전단좌굴특성과 이론식에 의한 특성을 분석하였다. 일반적으로 주름강판의 전단좌굴 형태는 국부좌굴, 전체좌굴 및 두 좌굴에 의한 연성좌굴로 분류된다. 그러나 마름모꼴주름과는 달리 정현파주름형상은 평평한 면이 없기 때문에 전단좌굴의 양상에 대한 경향이 달라진다. 특히 국부좌굴과 전체좌굴의 경계에서 나타나는 전단응력변화와 양상은 주름형태에 의해 차이가 난다. 분석 결과에서 볼 때, 제형 (마름모꼴)의 경우는 이론식내의 전체좌굴과 국부좌굴의 경계에서 연성좌굴모드가 발생했다. 그러나 정현파형의 경우 전체좌굴이 발생하는 구간에서 연성좌굴모드가 발생하는 양상을 보였다. 또한 국부좌굴 구간에는 제형형상이 그리고 전체좌굴 구간에서는 정현파형상이 전단좌굴에 저항하는데 유리하게 작용하였다.

The SPC wall girder is connected to the vertical walls to enhance performance of wall-wall girder connection. The purpose of this study is to investigate the structural characteristics such as strength, Load-displacement relation of wall-wall girder connection under the monotonic load tests. The fracture pattern of the specimens induced positive moment at connection was steel plate separation from concrete in SPC Wall.

This study analytically reviewed the behavior of Steel Plate Concrete(SC) walls subjected to cyclic shear forces to investigate the effects of shape and arrangement spacing of studs on the design of SC walls. The shape of the stud did not affect the shear behavior of SC wall but, the spacing influenced to its composite action.

This study analyze the buckling characteristics of trapezoidal and sinusoidal corrugation shapes with same weight. To do this, analyze the shear buckling characteristics through linear buckling analysis and on its theory.

이 연구에서는 SC 전단벽의 전단 연결재인 스터드의 배치와 형상이 SC 전단벽의 거동에 미치는 영향을 살펴보기 위해 전단벽체가 전단력과 축하중을 받을 때의 거동을 해석적으로 검토하였다. 이를 위해 서로 다른 형상과 배열의 스터드가 배열된 SC 전단벽을 대상으로 유한요소해석을 수행하였다. 스터드의 간격이 과하게 떨어져 있을 경우 합성거동이 완벽하게 작용하지 못하며 강판이 설계곡선의 2차 항복 전단력 보다 적은 하중에서 항복함을 확인하였다. 스터드의 형상은 일반형 스터드뿐만 아니라 개선된 경사형 스터드도 전단거동에 큰 차이를 나타내지 않았고, 스터드의 간격이 합성거동에 영향을 미침을 확인하였다. 또한 이 연구를 통하여 경사형 스터드가 일반형 스터드에 비해 좌굴을 제어하는데 효과가 있음을 확인하였다.

This study reviewed analytically the behavior of Steel Plate Concrete(SC) walls subjected to shear forces to investigate the effects of shape and arrangement spacing of studs on the design of SC walls. The results showed that the steel plate was yielded at the lower load than the second yielding shear force of the design skeleton curve when the spacing of stud is excessively far from each other. It is also found that the shape of the stud did not affect the shear behavior of SC wall, however, the spacing influenced to its composite action.

This study reviewed analytically the behavior of Steel Plate Concrete(SC) walls subjected to axial forces to investigate the effects of shape and arrangement spacing of studs on the design of SC walls. In this study, it was proven that the inclined shaped stud resists more effectively to the bucking load than the general shaped stud in SC wall.