In recent automobile development, vehicle weight reduction has become a very important goal. Seat weight reduction is a large portion of vehicle weight reduction. In this study, a specimen tensile tests were conducted on the Almag material, which is an alloy of aluminum and magnesium, and also conducted on SAFH440, SAFH 590, SAFC780, and SAFH980, which are mild steel materials used in the seat frame. The tensile specimen tests were carried out in two speed; 2mm/s and 4mm/s, and the obtained stress to strain curve was converted to the analysis material card of true stress to true strain curve to be used in the seat structural analysis. The constructed analysis material card was used in the specimen tensile finite element analysis, and the analysis result was able to obtain the stress to strain curve similar to the test result.

Thermal protection systems (TPS) are a group of materials that are indispensable for protecting spacecraft from the aerodynamic heating occurring during entry into an atmosphere. Among candidate materials for TPS, ceramic insulation materials are usually considered for reusable TPS. In this study, ceramic insulation materials, such as alumina enhanced thermal barrier (AETB), are fabricated via typical ceramic processing from ceramic fiber and additives. Mixtures of silica and alumina fibers are used as raw materials, with the addition of B4C to bind fibers together. Reaction-cured glass is also added on top of AETB to induce water-proof functionality or high emissivity. Some issues, such as the elimination of clumps in the AETB, and processing difficulties in the production of reusable surface insulation are reported as well.

In the present paper, the natural fiber materials that can be replaced to reduce the weight of the vehicle are analyzed by bubble charts of - and - , and the possibility of alternative application of materials is investigated. For this purpose, the driving energy and fuel efficiency of the vehicle using the data of K model analyzed. In addition, the effect of vehicle weight on fuel efficiency was analyzed through the dynamic analysis approach of the vehicle. From the research results, the following results were obtained. Most of natural fibers have lower density and equal tensile strength and strain than metal materials. Therefore, the application rate of natural fiber materials should be increased in consideration of the application purpose and material characteristics of the vehicle. The major variables that greatly influence driving energy and fuel efficiency were fuel efficiency improvement of about 10% in order of speed, rolling resistance and mass. In addition, when steel is lightened by 10%, fuel efficiency improvement of up to maximum 4.5% is shown in the order of CFRP, Al, Ti.

CFRP는 경량화 소재로 각광받고 있으며, 해양산업에서도 고급요트와 특수목적 선박 등에 사용되고 있다. 전기추진체계 또한 친환경 추진 방법으로써, 요트와 소형 여객선 등의 주 추진계로 활용되고 있다. 본 연구에서는 소형선박의 선체소재와 추진계를 각각 CFRP와 전동기로 교체하였을 때의 경량화 효과를 정량적으로 비교분석하였다. 45ft GFRP 선박을 대상으로 사례연구를 수행하였으며, 선체소재를 설계원안과 동일 함침율 기준의 CFRP로 재설계하였고, 추진계는 설계원안의 동일 마력, 항해거리를 유지할 수 있도록 전동기와 배터리 시스템을 설계하였다. 연구결과 CFRP 소재는 선각을 45 % 정도 경량화 할 수 있었고, 전기추진체계는 기관부를 58% 경량화 할 수 있음을 확인하였다. 다만 전기추진체계의 경우, 디젤 추진체계의 항해거리를 확보하기 위하여 상당한 양의 배터리 팩을 필요로 하기 때문에, 현실적인 수준에서의 경량화 실효성은 없는 것으로 확인되었다.

The purpose of this paper is to demonstrate to the practicing engineers, how to apply the advanced composite materials theory to the slab bridges. For general construction material used, there is certain theoretical limit in sizes. For super slab bridges construction, the reduction in panel weight is the first step to take in order to break such size limits. For a typical slab bridges panel, both concrete and advanced composite sandwich panels are considered. The concrete panel is treated as a special orthotropic plate. Advanced composite sandwich panels are considered as a self-weights less than one tenth of that of concrete panel, with deflections less than that of the concrete panel. This conclusion gives good guide line for design of the light weight of slab bridges.

대형구조물 설계 건설시 가장 큰 제한 조건은 모든 건설재료에는 치수의 한계가 있다. 따라서 본 논문 에서는 고전 보 이론에 의하여 단순 지지된 비등방성 슬래브의 처짐값을 구한 후 그 값을 비교 하였고, 특별 직교이방성 판 이론에 의하여 콘크리트와 샌드위치 교량의 물성을 비교하여 그 결과에 따른 처짐비와 강성값을 비교하였다. 경계조건은 임의의 경계조건을 갖는 판에 대한 해석해가 없기 때문에 부득이하게 네변이 모두 단순지지 되었을 경 우로 해석을 하였고 복합재료의 인장강도는 콘크리트나 강재보다 훨씬 높으므로 비교대상은 처짐으로 하였다. 즉, 철근 콘크리트와 동일하거나 작은 처짐을 일으키는 몇 가지 샌드위치판을 선택하여 고려하였다.

This study is an attempt to develop modular house structural systems with safety seismic performances under maximum seismic load of 0.3G. The modular house system was designed with joints (plan) using four-clip simple fastening type, and was also adopted a type of double inter-metallic assembly modular systems using a light metal. The seismic performance was evaluated.

Insulation materials used for building save energy and can be classified into inorganic and organic materials. Organic insulation emits toxic gases in a fire annd has lower water resistance. Inorganic insulation is heavy and has poorer thermal performance than that of organic material. This study evaluated the physical properties and fire resistance of lightweight inorganic insulation foaming material made of waste glass powder. The test results showed that the inorganic material performed well with low density and low thermal conductivity for an insulation material. Foam insulation material manufactured from glass powder was sufficient as a fire-resistant product.