리파아제 및 프로테이나아제와 같은 생분해성 효소는 지방산 에스테르 및 트리글리 세라이 드뿐만 아니라 지방족 폴리에스테르를 가수 분해가 가능하다. 본 연구에서는 생분해성 효소가 자연 환경 에서 PLA, 옥수수 전분 및 폴리에틸렌글리콜 등의 천연 지방족 폴리 물질이 분해에 중요한 역할인 생 분해성을 측정했다. 본 실험에서는 PLA, PLA와 폴리에틸렌아크릴레이트, PLA 그라프트 중합체인 폴리 에틸렌글리콜아크릴레이트를 사용한 PLAcoPolyethylene의 생분해성에 대해 실험하였다. 생분해성 고분 자를 합성할 때. 이들의 기계적 특성은 생분해성도, 열적특성, 실시간으로 폴리머 수지의 전기적 모니터 링을 통해 실험측정 결과, BOD와 PLAcoPolyethylene의 생분해도는 PLA와 그라프트 공중합된 폴리에 틸렌아크릴레이트는 다른 시료보다 낮은 속도로 측정되었다.

본 연구에서는 bulky하면서 큰 자유체적을 가지는 플루오렌기를 도입하여 새로운 폴리술폰(PSf)고분자를 합성하고 해당 고분자에 PEG를 공중합시켜 분리막을 제조하였다. PEG 특성 피크 (2950 cm−1,1110cm−1)의 확인을 통해 PEG가 도입을 확인하였으며. PSf-PEG 분리막이 단일 유리전이온도를 가지는 것을 확인 하였다. 분자량 6000 PEG가 10 mol%가 포함된 PSf-PEG분리막에서만 60 °C 부근에서 용융점이 나타났다. PSf-PEG 분리막의 CO2기체투과도는 PEG함량에 따라 감소하는 거동을 보였지만 CO2/N2선택도는 증가하는 경향을 보였다. 비슷한 함량에서 PEG의 분자량이 증가함에 따라 CO2투과도는 증가하는 경향을 보였다.

본 연구에서는 보다 플루오렌기를 포함한 폴리술폰 (PSf)과 PEG를 공중합시켜 분리막을 제조하였다. PEG 특성 피크 (2950 cm−1,1110cm−1)의 확인을 통해 PEG가 도입을 확인하였다. PSf-PEG 분리막이 단일 유리전이온도를 가지는 것을 확인 하였으며 분자량 6000 PEG가 10 mol%가 포함된 PSf-PEG 분리막에서만 60 °C 부근에서 용융점이 나타났다. PSf-PEG 분리막의 CO2기체투과도는 PEG함량에 따라 감소하였지만 CO2/N2선택도는 증가하는 경향을 보였다. 비슷한 함량에서 PEG의 분자량이 증가함에 따라 CO2투과도는 증가하는 경향을 보였다.

Cellulose is the most useful feedstock in the world that could be used to prepare new kinds of materials, and cellulose derivatives have potential application as functional polymers. Due to the present of hydroxyl groups, cellulose is considered to be an excellent material for surface modification. Among the chemical modification method, Graft copolymerization is a well-established and commonly used technique for modification of polymer surface. In this study, sulfonated GMA-g-cellulose ion exchange fibers were synthesized by gamma-ray mutual radiation. The conversion of epoxy groups into the functional groups was investigated. Factors affecting on grafting process such as radiation dose, monomer concentration, added salt and cross-linking agent were studied.

Poly(vinyl chloride)-g-poly(styrene sulfonic acid) (PVC-g-PSSA) 가지형 공중합체를 합성한 후, 이를 이용하여 80℃에서 열적으로 환원하여 은 나노입자를 제조하였다. 반응 시간을 바꿈에 따라 다양한 구조의 은 나노입자를 제조하는데 성공하였다. 1시간 정도의 짧은 반응 시간에서는 가지형 공중합체의 미세 상분리 구조를 크게 변화시키지 않고 5 nm 크기의 작은 은 나노입자가 생성되었다. 5시간 정도의 중간 반응 시간에서는 30 내지 50 nm 정도의 크기를 갖는 은 나노입자가 생성되었다. 18시간 정도의 긴 반응 시간에서는, 은입자가 뭉친 허리케인 모양의 은 집합체가 관찰되었다.

Solution copolymerization of Styrene(St.) with 2-Hydroxypropylacrylate(2-HPA) was carried out with Benzoylperoxide(BPO) as an initiator in toluene at 80℃ in a batch reactor. Reaction volume and reaction time were 0.3 liters, 8 hours respectively. The time to reach steady state was about the six time. The monomer reactivity ratios, r1(St.) and r2(2-HPA) were determined by both the Kelen-Tudos method and the Fineman-Ross method ; r1(St.)=0.376(0.330), r2(2-HPA)=0.408(0.778). The activation energy of thermal decomposition was in the range of 33~55kcal/mol.

Copolymerization of α-Methylstyrene(AMS) with Acrylonitrile(AN) was carried out with benzoylperoxide(BPO) as an initiator in toluene at 80℃ in a continuous stirred tank reactor. Reaction volume and residence time were 0.6 liters and 3 hours, respectively. The monomer reactivity ratios, rAMS and rAN determined by both the Kelen-Tüdös method and the Fineman-Ross method were rAMS=0.16(0.14), rAN=0.04(0.06). The cross-termination factor Φ of the copolymer over the entire AMS composition ranged from 0.75 to 0.92. The Φ factors of poly(AMS-co-AN) were increased with increasing AMS content. The simulated conversions and copolymerization rates were compared with the experimental results. It was observed that the average time to reach dynamic steady-state was three times the residence time.

Micelle formation and adsorption at the Ti02 interface of a series of polystyrene-polythylene oxide(PS-PEO) block copolymer in aqueous solution was studied using fluorescence probing and small-angle X-ray methods. Further, the stability of aqueous Ti02 dispersion in the presence of copolymer was investigated by microelectrophoresis, optical density and sedimentation measurements. The dissolution of pyrene as fluorescent probe in aqueous surfactant solution leads to a slow decrease of the I1/I3 ratio, as the copolymer concentration increase; I1 and I3 are respectively the intensities of the first and third vibrionic peaks in the pyrene fluorescence emission. The behaviour was due to the characteristics of the copolymers and/or to the copolymer association efficiency in water. Moreover, the adsorption at the plateau level increases with decreasing PEO until chain length. The zeta potential of TiO2 particles decreases with increasing copolymer concentration and reaches a plateau value. Finally, stabilization using block copolymers was more effective with samples having higher weight fractions of PS block.

This research investigated the feasibility of rice husk (RH) as a biosorbent for the removal of anions from aqueoussolution. RH-g-GMA-Am biosorbent, which possesses anionic exchangeable function, was prepared through graftpolymerization of glycidyl methacrylate (GMA) in the presence of N,N'-methylene-bis-acrylamide as a cross-linker usingpotassium peroxydisulphate as a redox initiator and subsequent amination reaction using ethylenediamine (EDA),diethylenetriamine (DETA), dimethylamine (DMA) and trimethylamine (TMA) as a amine source. Fourier transforminfrared (FTIR) and scanning electron microscopy (SEM) analysis as well as the sorption capacity for anions verifiedthe presence of grafted GMA polymers and amine groups on the RH surface. The zero point of surface potential ofaminated RH-g-GMA-Am sorbent was 6.4, which facilitated the sorption of anions on the positively charged sorbent atpH<6.4. The sorption capacity of RH-g-GMA-Am depending on the amination chemicals increased in the order:DETA≥EDA>DMA>TMA, i.e., primary amine>secondary amine>tertiary amine. The sorption selectivity of RH-g-GMA-Am sorbent aminated with DETA and EDA in the presence of equimolar anions and at pH 4.7 increased in theorder: SO4>PO4>NO3>F. Furthermore, their sorption capacities for PO4 were much higher than those of commercialanion-exchange resins. The results obtained suggest that the RH-g-GMA-Am biosorbent prepared by the GMA graftcopolymerization and subsequent amination can be used as an effective anion-exchanger comparable to commercial anion-exchange resins.

This research investigated the feasibility of rice husk as a biosorbent for the removal of heavy metals from aqueous solutions. The carboxyl groups were chemically bound to the surface of the rice husk by graft polymerization of acrylic acid using potassium peroxydisulphate as a redox initiator. The Pb sorption capacity and FT-IR spectra confirmed the presence of carboxyl groups on the structural units of the acrylic acid-grafted rice husk (RH-g-AA). The sorption selectivity of the RH-g-AA for cations under competition with each other was high in the following order: Pb > Cu > Cd ≥ Fe > Mn > Zn > Ni > Mg > K > Cr > Ca. Sorption equilibrium of Pb on RH-g-AA was better described by the Fruendlich isotherm model than the Langmuir isotherm model. The sorption energy obtained from D-R model was 13.13 kJ/mol indicating an ion-exchange process as the primary sorption mechanism. Sorption kinetic data fitted with the pseudosecond- order kinetic model and indicated that both external and intraparticle diffusion took part in sorption processes. The RH-g-AA sorbent could be regenerated for more than 5 times by the washing process with 0.1 M HCl without a serious lowering the sorption capacity.