This study aims to develop a regression model using data from the Ammunition Stockpile Reliability Program (ASRP) to predict the shelf life of 81mm mortar high-explosive shells. Ammunition is a single-use item that is discarded after use, and its quality is managed through sampling inspections. In particular, shelf life is closely related to the performance of the propellant. This research seeks to predict the shelf life of ammunition using a regression model. The experiment was conducted using 107 ASRP data points. The dependent variable was 'Storage Period', while the independent variables were 'Mean Ammunition Velocity,' 'Standard Deviation of Mean Ammunition Velocity,' and 'Stabilizer'. The explanatory power of the regression model was an R-squared value of 0.662. The results indicated that it takes approximately 55 years for the storage grade to change from A to C and about 62 years to change from C to D. The proposed model enhances the reliability of ammunition management, prevents unnecessary disposal, and contributes to the efficient use of defense resources. However, the model's explanatory power is somewhat limited due to the small dataset. Future research is expected to improve the model with additional data collection. Expanding the research to other types of ammunition may further aid in improving the military's ammunition management system.

Identifying the water circulation status is one of the indispensable processes for watershed management in an urban area. Recently, various water circulation models have been developed to simulate the water circulation, but it takes a lot of time and cost to make a water circulation model that could adapt the characteristics of the watershed. This paper aims to develop a water circulation state estimation model that could easily calculate the status of water circulation in an urban watershed by using multiple linear regression analysis. The study watershed is a watershed in Seoul that applied the impermeable area ratio in 1962 and 2000. And, It was divided into 73 watersheds in order to consider changes in water circulation status according to the urban characteristic factors. The input data of the SHER(Similar Hydrologic Element Response) model, a water circulation model, were used as data for the urban characteristic factors of each watershed. A total of seven factors were considered as urban characteristic factors. Those factors included annual precipitation, watershed area, average land-surface slope, impervious surface ratio, coefficient of saturated permeability, hydraulic gradient of groundwater surface, and length of contact line with downstream block. With significance probabilities (or p-values) of 0.05 and below, all five models showed significant results in estimating the water circulation status such as the surface runoff rate and the evapotranspiration rate. The model that was applied all seven urban characteristics factors, can calculate the most similar results such as the existing water circulation model. The water circulation estimation model developed in this study is not only useful to simply estimate the water circulation status of ungauged watersheds but can also provide data for parameter calibration and validation.

국내 수출입 물동량의 증가와 해운산업의 발달에 따라 항만시설물의 사용빈도 또한 증가 추세에 있으나, SOC의 해운항만 부문의 투입 정부예산은 감축되어 왔다. 증가하는 사용빈도에 반하여 줄고 있는 예산으로 인해 항만시설물의 체계적이고 효율적인 유지관리 및 운영이 필요하다. 효율적인 유지관리 시스템 구축을 위해서 항만시설물이 위치한 지역, 구조물의 형태 및 취급화종, 시공 및 유지관리 수준과 같은 특성을 고려한 열화모델 개발이 필요하다. 항만시설물의 열화모델 개발은 시설물의 열화요인 분석과 열화데이터 수집 및 열화 모델 개발의 과정으로 수행하였다. 열화 모델 개발기법은 변수 특성에 따른 시간 의존적 상태변화를 반영할 수 있는 결정론적 방법인 다중 회귀분석과 변동성이 큰 자료들의 상태이력을 반영할 수 있는 확률론적 방법인 마코브 체인 이론을 이용하였다. 각 방법을 통해 잔교식 구조물과 블록식 구조물의 Project level의 상태 열화모델을 제시하였다.

As a measure of health, the percentage of body fat has been utilized for many ergonomist, physician, athletic trainers, and work physiologists. Underwater weighing procedure for measuring the percentage of body fat is popular and accurate. However, it is relatively expensive, difficult to perform and requires large space. Anthropometric techniques can be utilized to predict the percentage of body fat in the field setting because they are easy to implement and require little space. In this concern, the purpose of this study was to find a regression model to easily predict the percentage of body fat using the anthropometric circumference measurements as predictor variables. In this study, the data for 10 anthropometric circumference measurements for 252 men were analyzed. A full model with ten predictor variables was constructed based on subjective knowledge and literature. The linear regression modeling consists of variable selection and various assumptions regarding the anticipated model. All possible regression models and the assumptions are evaluated using various statistical methods. Based on the evaluation, a reduced model was selected with five predictor variables to predict the percentage of body fat. The model is : % Body Fat = 2.704-0.601 (Neck Circumference) + 0.974 (Abdominal Circumference) -0.332 (Hip Circumference) + 0.409 (Arm Circumference) - 1.618 (Wrist Circumference) + ε. This model can be used to estimate the percentage of body fat using only a tape measure.

이 연구는 북서태평양에서 여름철(7-9월) 동안 발생하는 태풍 빈도를 예측하기 위한 다중회귀모델을 4가지 원격패턴을 이용하여 개발하였다. 이 패턴은 4-5월 동안 동아시아 대륙에서의 시베리아 고기압 진동, 북태평양에서의 북태평양 진동, 호주근처의 남극진동, 적도 중앙태평양에서의 대기순환으로 대표된다. 이 통계모델은 이 모델로부터 예측된 높은 태풍발생빈도의 해와 낮은 태풍발생빈도의 해 사이에 차를 분석함으로써 검증되었다. 높은 태풍발생빈도의 해에는 다음과 같은 4가지의 아노말리 특성을 나타내었다: i) 동아시아 대륙에 고기압성 순환 아노말리(양의 시베리아 고기압진동), ii) 북태평양에 남저북고의 기압계 아노말리, iii) 호주 근처에 저기압성 순환 아노말리(양의 남극진동), iv) 봄부터 여름 동안 니뇨3.4 지역에 저기압성 순환 아노말리. 따라서 적도 서태평양에서 무역풍 아노말리는 양반구의 아열대 서태평양에 위치한 저기압성 순환 아노말리에 의해 약화되었다. 결국, 이러한 기압계 아노말리의 공간분포는 열대 서태평양에 대류를 억제하는 대신 아열대 서태평양에 대류를 강화시켰다.

Wastewater treatment plant(WWTP) has been recognized as a high energy consuming plant. Usually many WWTPs has been operated in the excessive operation conditions in order to maintain stable wastewater treatment. The energy required at WWTPs consists of various subparts such as pumping, aeration, and office maintenance. For management of energy comes from process operation, it can be useful to operators to provide some information about energy variations according to the adjustment of operational variables. In this study, multiple regression analysis was used to establish an energy estimation model. The independent variables for estimation energy were selected among operational variables. The R2 value in the regression analysis appeared 0.68, and performance of the electric power prediction model had less than ±5% error.