Toilet liquid-type cleaners utilize operating technology that employs buoyancy mechanism to inject uniform amount of cleaning solution. Flow characteristics of velocity and pressure distributions in the flow field of toilet flush cleaner injection device have been analyzed with CFD method. The flow rate decreases near the inlet of the system, where it contacts the container of the cleaning liquid bottle. It then increases near the injection device stopper and decreases again as it moves toward the system outlet The height of the cleaning solution decreases from 12 cm to 3 cm when using the spray device, the average outlet velocity decreases by approximately 73%. The solution level difference increases from 1.616 cm to 3.216 cm, the inlet velocity decreases by approximately 4.1%~5.6%. These predicted results can be widely applied as basic conceptual design data for highly efficient toilet flush cleaner injection device.

PURPOSES: This study aims to establish the priority of introducing anti-icing spray system for regions of the National Highways in South Korea. Using this study, a logical plan for instituting such an anti-icing spray system can be established for the National Highways METHODS : The Analytical Hierarchy Process (AHP) was employed to prioritize the implementation of an anti-icing spray system on Korean highways. For this purpose, an existing scoring table developed by the Ministry of Land, Infrastructure Transport Affair was slightly modified in order to reflect recent trends in winter maintenance. A survey was conducted to gather the preferences regarding the developed hierarchy of road experts and agencies. Finally, the final score was produced by integrating the scoring results with estimated weights for each evaluation criterion. RESULTS: In general, Honam and the metropolitan areas have relatively high priority while other areas such as Chungcheong, Young Nam, and Gang Won appear to be uniform in importance in terms of establishing an anti-icing spray system. This result may indicate that historical weather data and traffic volumes are significant factors in deciding in winter maintenance polices CONCLUSIONS : In this study, useful insights are suggested regarding winter maintenance by simultaneously performing rapid snow removal and proactive treatment. Issues of resource allocation may be potential research items in the field transportation engineering.

The goal of this study is to propose the effective method of investigating the injurious factors and making improved plans that prevents the workers against musculoskeletal disorders at an diesel engine manufacturing company and the same business field with similar working conditions and process. A questionnaire were adopted to analyze the symptoms of workers' musculoskeletal disorders, and an ergonomic assessment method such as RULA, OWAS were performed to find out harmful factors of workplace and working posture. Based on the result of the evaluation, to enhance the working environment, improvement of worktable, working space, tools, and outfit was suggested, and induction of mechanical system was also suggested. It can be concluded that the method and process described in this paper could be helpful for diagnosing the musculoskeletal disorders and making improvement plans to the diesel engine fuel injection system manufacturing company and the same business field with similar working conditions and process.

The silica nanoparticles were used as support of catalyst, filling material, electronic assembler, thin film material, and sensor material. And, the titania nanoparticles were used as pigment, dielectric substance, sensor and photocatalyst. In this paper, the spherical composite particles of TiO2/SiO2with narrow size distribution and phase pure were synthesized by ultrasonic spray pyrolysis method from TiOSO4 and colloidal silica solution. Using ultrasonic apparatus, this starting solution was vaporized to droplets, and these droplets were induced into tube furnace by carrier gas. The resulting composite powder was characterized by scanning electron microscopy, X-ray diffraction analysis, TG-DTA, in vitro sun protection factor(SPF) and BET surface area analysis.

육묘장의 두상관수장치는 균일하게 관수되어야 모종도 균일하게 성장한다. 본 연구에서는 부채꼴 분사노즐을 이용한 두상관수장치의 노즐 설치위치에 따른 관수상태를 조사하여 균일관수방법을 구명하였다. 살수량은 주행속도에 반비례하였고, 관수균일도는 노즐과 관수면과의 거리에 큰 영향을 받으며 주행속도의 영향은 없었다. 단일노즐에 의한 두상관수인 경우 노즐 끝에서 관수면이 60cm 이상 멀어질수록 관수균일도가 향상되며, 연속노즐에 의한 두상관수인 경우 관수면이 노즐분사 각도의 2차 교차점에 위치할 때 관수균일도가 가장 좋은 것으로 나타났다. 두상관수장치의 균일관수를 위해서는 작물의 머리높이가 분사노즐의 2차교차점에 일치하도록 노즐의 위치를 정해야 하며 작물의 자람에 따른 노즐대 놀이를 조절해 주는 것이 바람직한 것으로 판단된다.

The change of pressure drop according to the change in the inlet concentration, pulse interval, and injection distance of pulse air jet type bag filters, and the effect of venturi installation are as follows. The pressure drop with the range of 30 to 50mmH2O varies according to the injection distance with 30, 50, 70, 90sec and the inlet concentration of venture built-in fabric filters. For the lower concentration of 0.5g/m3 and 1g/m3, the pressure drop(ΔP) was stable 60 to 90minutes after operation. For the higher concentration of 3g/m3, as ΔP continues to go up, pulse interval should be set shorter than 30 seconds. The pressure drop with the injection distance of 110mm, when inlet dust concentration is 0.5g/m3 or 1g/m3, is 1.3 to 2 lower than with the injection distance of 50, 160, and 220mm, which means that the inflow amount of the secondary air by the instant acceleration is large. The injection distance of 2g/m3 and 3g/m3 has the similar pressure distribution. The higher inlet concentration is, the more important pulse interval is than injection distance. The pressure drop has proved to be larger when inlet concentration is lower and injection distance closer, on condition that the venturi is installed. The change in the pressure drop was smallest when injection distance was 50mm, followed by 220mm, 160mm, and 110mm.