We have studied the efficient operation of the radar and the appropriateness of the installation location, when constructing the VTS system. As the Civil-Military Complex Harbour (Kangjeong Port) is completed in 2016, we set the control area within 10 nautical miles centering on Kangjeong Port, and found out and removed the operational radar blind area of VTS system to provide safe navigation information for vessels that navigating this area. Assuming that two international cruise ships entering at the same time, we performed the radar simulation and compared the images by considering the three sites of Kangjeong Port, Miaksan and Seoguipo Port. Simulation results for a single radar installed at Kangjung Port indicate that the blind area was largely affected by two large cruise ships and the surrounding islands. The blind area due to Kogunsan was considerably large when installed in Miaksan, but the blind area due to the influences of Beomseom, Moonseom and Seopseom was negligibly large. It seems that additional radar installation is necessary as a complementary solution to solve this blind area. When two radars were installed at Miaksan and Kangjeong Port, the residual blind area due to the Seopseom was 0.25 km2 at 0.1~0.33 nautical miles in the southeast direction from Seopseom. In addition, the remaining blind area with two cruise ships mutually influenced was 0.18 km2, which did not occur with a single cruise ship.

본 연구에서는 고온에서 유기용매를 정제할 수 있는 고온, 고압에서 안정한 상업화 규모의 고효율 중공사 투과증발 막, 막모듈 개발, 상업 규모의 막분리 장치시스템 개발을 수행하였는데 구성 요소기술은 1) 고온 고압 하에서 사용할 수 있는 브레이드 강화 중공사 막제조, 2) 중공사 막모듈 제조, 3) 막 탈수, 정제장치 시스템 설계 및 제작기술등을 개발하였다. 개발 중 공사 투과증발막은 독일의 슐츠막 보다 막 안정성과 막 성능이 우수하였으며, 막면적 4.6 m 2의 고효율 상업적 규모의 중공사 막모듈을 개발하였고, 200 L/hr 이상의 처리용량의 Pilot 규모의 투과증발 막장치 시스템을 개발하였다. 기존 평막 혹은 중공사 막에서 모듈에서 볼 수 있었던 모듈내부에 공급액의 dead volume형성, 공급액의 채널링 현상들을 제거하기 위해서 본 개발 중 공사막과 막모듈의 특징은 고온, 고압의 유기용매를 중공사막 내부로 공급되어 흐르도록 설계되어 있어 막분리 효율이 우수하 며 특히 기존의 막제품의 대비 막모듈 가격이 저렴하고, 막성능 및 치수안정성이 우수하다. 또한 공급액의 열손실 적어 에너지 효율이 우수할 뿐 아니라 막모듈 내에 중공사막 사이의 간격이 일정하여 가해주는 진공이 균일하게 각 중공사막의 투과부 표 면에 전달될 수 있기 때문에 투과된 투과물을 막 표면으로부터 효과적으로 제거할 수 있으므로 투과속도 또한 우수하다.

The fuel cost of fishing lights for squid jigging fishing vessels takes about 30% of total fishing costs and over 65% of total fuel costs, which indicates the necessity of development of cost-reducing and high efficient fishing light system. This study aimed to analyze the economic effectiveness of LED fishing light systems in combination with metal halide lamp for the squid jigging fishery. Analytical results showed that the level of fishing profits of vessels using LED lights could be different with those of vessels using metal halide lights. That is, when a fuel cost could be reduced by 30%, fishing profits of vessels using LED lights might be the same as those of vessels using metal halide lights, and fishing profits of vessels using LED lights could be higher than those of vessels using metal halide lights when a fuel cost could be reduced by 50%.

본 연구에서는 유비쿼터스 식물공장의 재배환경에 필요한 요소들의 센서 네트워크를 구성하고 자동으로 감지하여 적응형 뉴로-퍼지 추론시스템을 통하여 환경변화를 추론하여 식물공장의 재배환경을 적절하게 제어할 수 있는 새로운 자동제어시스템의 프레임워크를 제안하고, 이를 설계하였다. 유비쿼터스 식물공장 환경을 제어하기 위하여 식물공장의 재배환경에 영향을 미치는 환경요소인 실내온도, 근권온도, 습도, 광도, CO2 농도를 측정할 수 있는 센서 네트워크를 구성하고 측정된 환경요소의 변화에 따라 램프, 환기, 습도, CO2 농도, 온도를 제어할 수 있는 장치를 자동으로 제어할 수 있는 식물공장 자동제어시스템을 설계하였다. 이를 위하여 본 연구에서는 센서를 통하여 받아들이는 입력값을 퍼지소속함수로 변화하고 적응형 뉴로-퍼지시스템에 따라 추론하고 평가하여 보다 정밀하게 식물공장을 자동으로 제어할 수 알고리즘을 개발하였고 이를 구현하였다. 개발된 자동제어시스템을 상추 식물공장에 적용한 결과 만족스러운 시험결과를 얻을 수 있었다. 향후 연구로는 식물공장에서 재배하고 있는 작물별 생장모델의 적합도 검정 및 개선을 위하여, 작물별 재배규칙을 보다 상세히 도출하는 것이 필요하고, 작물의 재배에 필요한 지식을 보다 정량적으로 표현하고 지식상에 내포하고 있는 불확실성을 해결하는 것이 필요하다. 더 나아가 식물공장에서 환경인자간의 상호관련성을 보다 정밀하게 수식화하고 이를 추론할 수 있는 정밀하고 과학적인 자동제어시스템의 개발이 필요하다.

This study was conducted in order to improve the automatic fishing operation system for anchovy boat seine by comparison with the fishing gear geometry and efficiency using the labor saving nets and the combined type net with midwater trawl. Field experiments were carried out to observe the geometry of nets and improve the fishing operation system by catcher boats. The vertical net opening of fore wing net, square, fore bag net and after bag net of the combined type net were varied in the range of 9.9~12.9. 16.2~28.2, 6.8~12.1 and 9.5~15.2m respectively, when the towing speed was 1.0m/sec and the distance between boats were 100m, 200m, 300m. The vertical net opening of the combined type nets was gradually decreased as function of with increasing the distance between catcher boats. Labor saving net which was maintained the net opening and towing depth stable was more suitable for the automatic hauling operation system by improvement of bag net rather than the combined type nets which was impossible in swallow depth and near to anchovy school. 3 boats hauling operation system of the labor saving net was carried out by crane with power block in 2 catcher boats for improvement of hauling operation and pushing equipment of anchovy cooking system in the processing boat for maintain more anchovy in dry frame. From the results of field experiments, 3 boats hauling operation system with power block and improved cooking system was very 3 boats hauling operation system with power block and improved cooking system was very useful and more practical as hauling time 20~35min and No. of fishermen 12~13 in comparison with the traditional system such as hauling time 30~50 min and No. of fishmen 28~38.

상수관망시스템 내 관로가 파손될 경우, 수리를 위해 파손 관로와 인접한 밸브를 차폐하게 된다. 이때, 밸브 차폐로 인해 관망의 일부분이 고립되어 용수공급이 차단되는 단수구역이 발생하게 된다. 단수구역은 파손 관을 포함한 직접고립지역과 직접고립지역으로 인해 의도치 않게 수원으로부터 물 공급이 차단되는 간접고립지역으로 구분된다. 따라서, 관 파손에 의한 단수구역 및 단수용량은 시스템 내 설치된 밸브의 개수와 위치에 크게 영향을 받게 된다. 본 연구에서는 상수관망시스템 내 최적의 밸브위치를 결정하기 위해 최적화 모형을 개발하고 적용하였다. 예시 관망을 대상으로 단수용량 최소화를 목적함수로 설정한 단목적 최적화와 단수용량과 밸브 설치비용을 동시에 최소화하는 다목적 최적화를 각각 수행하였으며, 두 가지 모형을 통해 도출된 최적 밸브설치 결과를 비교, 분석하였다.

The purpose of this study is to suggest the analytical framework for a spatial structure of a tourism destination master plan by the two types of the tourism development models: Tourist attraction System Model and Tourism Destination Region Design Model. The resort development plan is introduced as a planning tool for regenerating the eastern Pusan regions, but the economic and environmental impacts and the sociocultural dilemma accompanied by the development should be fully considered before launching the business. The development plan announced currently is traced and examined in comparison with the upper-leveled and related plans. The Tourist Attraction System Model based on the systems theory is applied to the designated regions. The Tourism Destination Region Design Model then is applied for analyzing the components of each region on the master plan. The results of the findings suggest that the tourism destination plan is basically different from a general master plan on the physical comprehensive plan, the destination is recognized as a subsystem of the whole tourism system, and thus tourism destination plan is considered as a spatial arrangement of tourism facilities and the inter- and intra-circulation.

This study, a sub-one of comprehensive research works titled under "Rural Resources Evaluation System", tried to propose a rational methodology for development of rating tabulation on evaluation items. Firstly, the database system for handling of original/processed data of each evaluation items was constructed, being mainly focussed on the possibilities of data acquisition and statistical treatment. The rating tabulation system developed in the study has the formalized evaluation classes as 2 or 5 for convenience/simplification of analysis works. For each evaluation item in lower step of the goal system, 5 types of rating technique were arranged, which were based on statistical analysis using mean and standard deviation values(Type I), its existence or not(Type II), relative significance of its holding volume(Type III), synthesized weighting scale of its quality and quantity(Type IV), and the others(Type V). And, standardized 4-steps procedure for rating tabulation was proposed. Finally, the rating tabulation system developed in the study was applied to each evaluation item of goal system, from which the numerically-valued ranking criteria was obtained.