In this study, we developed a thermoelectric generation system for coastal fishing boats that allows for a high-density arrangement of thermoelectric modules, verified the improvement in performance by conducting comparative analysis between field test results and results from previous studies. The developed thermoelectric generation system was installed in a 3-ton gill-netter to analyze the engine revolutions per minute and energy production per day for each fishing process over a period of 20 days. From the experimental results, the maximum electric energy generated was 207.1 Wh, the minimum was 53.93 Wh and the average electric energy was 129.98 Wh. In accordance with the increasing of the engine r.p.m., the maximum electric production was 183 W at 1,500 r.p.m. It was approximately 80.5% of designed capacity, 227.2 W. Considering the result in the earlier research was 50.7% of designed capacity, 115.8 W. It was improved by 30% compared to the earlier one. The fishing operation was classified as departure, fishing and arrival. From the result on production analysis of electric energy, the composition of energy was 63% in fishing, 19.5% in departure and 17.5% in arrival. The electric energy production per unit hour was 42.8% in arrival, 32.9% in departure and 24.3% in fishing.

The renewable energy sources can be thought of one of the major measures to reduce greenhouse gas emissions in the industries. However, the utilization technology for those sources is approaching in the different matters. One of them, thermoelectric generation might be applicable to fishing industry. A various of internal combustion engines are used in a wide range of fisheries. After the ignition process, the heat passed out from the exhaust outlet. Recycling the heat could be not only an energy source but also reduction of green gas emission. Therefore, this study was designed to verify the feasibility of generation from wasted exhaust gas and analyze the performance. The designed experiment devices were connected with a data logger and an electric loader to quantify the currency and voltage. The devices were installed in a coastal fishing vessel for a gillnet fishery. During the whole fishing trips, the amount of generation was measured by engine rpm and the fishing operation procedures including vessel operations. At the maximum 1,500 rpm in the practical range, the generation amount was 113.6 W. The amount difference in relation to connection method was within 5 W: serial connection was 111.4 W and parallel connection was 115.8 W.

본 연구에서는 열전소자와 플라즈마 장치를 삽입하여 제작된 컨테이너와 기존의 사용되고 있는 스티로폼(EPS)박스에 소고기를 저장하면서 저장 중 품질특성을 조사하였다. 온도변화 측정 결과 저장기간 동안 TCS-1 컨테이너가 2℃ 이하로 온도유지가 잘 되는 것으로 측정되었다. EPS박스는 저장 3일 이후 소고기가 부패되어 더 이상 실험이 불가능 하였다. 소고기의 신선도를 나타내는 휘발성염기질소(VBN)과 지방산패도(TBA)값의 측정 결과, 저장 7일째 TCS-1의 VBN은 7.72 mg%, TBA는 0.52 mgMA/kg, TCS-2의 VBN 값은 9.20 mg%, TBA는 0.91 mgMA/kg로 측정되어 TCS-1이 TCS-2 보다 유의적으로 적은 증가율을 나타내어 소고기의 신선도를 더 잘 유지하는 것으로 판단되었다. 미생물 변화는 저장 7일 TCS-1은 4.62 log CFU/g, TCS-2는 7.09 log CFU/g으로 측정되어 TCS-1이 유의적으로 미생물 증식 억제에 효과적인 것으로 나타났다. 기호도 조사 또한 저장 7일째 TEU-1은 모든 항목에서 6.5점 이상의 평가를 받았으나 TCS-2는 4.1 이하의 평가를 받아 소고기의 상품성이 상실된 것으로 판단되었다. 모든 분석항목에서 TCS-1이 TCS-2보다 소고기 신선도 유지에 효과적인 것으로 판단되었다.