PURPOSES : This study aims to calculate the estimation of travel time saving benefits from smart expressway construction by considering the willingness to pay for automated vehicles. METHODS : In this study, data were collected from 809 individual drivers through a stated preference survey. A multinomial logit model was constructed to analyze the choice behavior between arterial roads, expressways, and smart expressways. Through this, the values of time and benefits were estimated. RESULTS : The value of time was calculated at 19,379 won per vehicle per hour for arterial roads and expressways and 23,061 won per vehicle per hour for smart expressways. Applying these values to the Jungbu Naeryuk expressway, we evaluated the demand change and benefits resulting from the improvement to the smart expressways. The results show that the traffic volume on the Jungbu Naeryuk expressway is expected to increase by 4.7% to 20.7% depending on the changes in capacity. CONCLUSIONS : The travel time saving benefits are estimated as positive, resulting from the construction of smart expressways. The benefits resulting from the construction of new smart expressways are expected to be enhanced due to the anticipation of more significant time-saving effects.

본 연구에서는 운전 시뮬레이션을 사용하여 자율주행 환경을 구현한 후 3-수준 자율주행 조건에서 자율주행 차량 (automated vehicle: AV)으로부터 운전자에게 전달되는 제어권 인수 요구(takeover request: TOR) 정보의 양상(시각, 청각 및 시각+청각) 및 도로 형태(직선도로와 곡선도로)에 따라 운전자의 제어권 인수 시간(takeover time: TOT) 및 정신적 작업부하(제어권 인수 이후에 운전자들이 경험한 주관적 작업부하와 심장박동수에서의 변화)가 어떻게 차별 화되는지 분석하였다. 본 연구의 결과를 요약하면 다음과 같다. 먼저, AV로부터 TOR이 제시된 이후 실험참가자들 이 보인 TOT에 대한 분석 결과, TOR 정보양상의 측면에서는 시각 정보가 가장 빠른 TOT를 이끌어 낸 반면 청각 정보 조건에서 가장 느렸고, 도로 형태 측면에서는 직선도로 조건에 비해 곡선도로 조건에서의 TOT가 유의하게 더 느렸으며, 특히 청각 정보 조건에서 도로 형태에 따른 TOT에서의 차이가 가장 컸다. 둘째, 정신적 작업부하에 대한 분석 결과, TOR 정보가 시각 혹은 시각+청각적으로 제시된 조건에 비해 청각적으로 제시된 조건에서 주관적 작업부 하 측정치와 심장박동수 변화 크기 모두 전반적으로 더 낮았고 특히, 심장박동수 변화의 경우 이러한 경향은 곡선도 로 조건에서만 관찰되었다. 이러한 결과는 TOR 정보의 양상과 도로 형태에 따라 운전자의 TOT와 정신적 작업부하 수준이 달라질 수 있고, 특히 TOT가 빠를수록 정신적 작업부하 수준은 상대적으로 더 높아질 수 있음을 시사한다.

PURPOSES : The purpose of this study is to identify the beneficiaries of car-sharing that can utilize autonomous car-sharing services when they are introduced. METHODS : This study was conducted in two stages. The first step was to analyze the characteristics of shared car usage by region and rental time using t-Ttest. The second step was to analyze the beneficiaries of autonomous car-sharing services if they are introduced. The beneficiaries were derived using parking time and survey data. RESULTS : Car-sharing behavior showed statistically different usage characteristics by region and rental period. However, the distance traveled per trip for short trips was similar. When the autonomous car sharing service with free return and rental is introduced, 31% (Jeju) to 38% (Daejeon) of short-term renters and 50 to 52% of long-term renters are expected to benefit. CONCLUSIONS : When introducing autonomous car-sharing services, it is necessary to establish a shared car strategy that reflects the characteristics of car-sharing use by region and rental period. In particular, in Jeju Island, where the rental time is relatively longer than Daejeon, the introduction of autonomous car-sharing services will contribute to reducing the cost of shared vehicles in terms of cost.

목적 : 본 연구는 시뮬레이터 훈련이 척수손상 환자의 운전시뮬레이터 도로 주행시간과 주행조작 능력에 미치는 영향을 알아보고자 하였다. 연구방법 : 본 연구는 단일사례실험연구 AB설계로 진행되었으며, 기초선 3회기, 중재기 10회기를 적용하였다. 기초선 3회, 중재기 5회 도로주행코스(중급) 수행 시 운전시간, 주행조작 능력 자료가 수집되었으며, 연구결과 분석을 위하여 시각적 분석 방법과 평균 ±2*표준 편차를 사용한 양적 분석을 동시에 사용하였다. 결과 : 연구대상자 3명의 총 주행시간은 기초선 A보다 중재기 B에서 3분 내외의 감소하였고, 세 명 모두에서 통계학적으 로 의미있는 주행 능력의 향상이 확인되었다. 주행조작능력 또한 오류 점수가 감소하였고, 첫 번째 참여자와 세 번째 참 여자의 경우 그 변화가 통계학적으로 유의하였다. 결론 : 본 연구에서 연구대상자의 총 주행시간 및 수행 오류의 감소가 확인되어 운전시뮬레이터 훈련의 효과가 있었다. 이 와 같은 결과는 운전시뮬레이터 훈련의 적용 가능성을 뒷받침 한다.

PURPOSES : The desire of drivers to increase their driving speeds is increasing in response to the technological advancements in vehicles and roads. Therefore, studies are being conducted to increase the maximum design speed in Korea to 140 km/h. The stopping sight distance (SSD) is an important criterion for acquiring sustained road safety in road design. Moreover, although the perception-reaction time (PRT) is a critical variable in the calculation of the SSD, there are not many current studies on PRT. Prior to increasing the design speed, it is necessary to confirm whether the domestic PRT standard (2.5 s) is applicable to high-speed driving. Thus, in this study, we have investigated the influence of high-speed driving on PRT. METHODS : A driving simulator was used to record the PRT of drivers. A virtual driving map was composed using UC-Win/Road software. Experiments were carried out at speeds of 100, 120, and 140 km/h while assuming the following three driving scenarios according to driver expectation: Expected, Unexpected, and Surprised. Lastly, we analyzed the gaze position of the driver as they drove in the simulated environment using Smarteye. RESULTS: Driving simulator experimental results showed that the PRT of drivers decreased as driving speed increased from 100 km/h to 140 km/h. Furthermore, the gaze position analysis results demonstrated that the decrease in PRT of drivers as the driving speed increased was directly related to their level of concentration. CONCLUSIONS : In the experimental results, 85% of drivers responded within 2.0 s at a driving speed of 140 km/h. Thus, the results obtained here verify that the current domestic standard of 2.5 s can be applied in the highways designated to have 140 km/h maximum speed

This paper considers automated storage and retrieval systems with double shuttle. We develop the travel time model based on the first come first service rule. We evaluate the performance of the double shuttle system working on the four command cycle.

A* algorithm is a global path generation algorithm, and typically create a path using only the distance information. Therefore along the path, a moving vehicle is usually not be considered by driving characteristics. Deceleration at the corner is one of the driving characteristics of the vehicle. In this paper, considering this characteristic, a new evaluation function based path algorithm is proposed to decrease the number of driving path corner, in order to reduce the driving cost, such as driving time, fuel consumption and so on. Also the potential field method is applied for driving of UGV, which is robust against static and dynamic obstacle environment during following the generated path of the mobile robot under. The driving time and path following test was occurred by experiments based on a pseudo UGV, mobile robot in downscaled UGV’s maximum and driving speed in corner. The experiment results were confirmed that the driving time by the proposed algorithm was decreased comparing with the results from A* algorithm.