Chloride-based fluxes such as NaCl-KCl are used in the refining of Al melt. The vapor pressure of the chloride is one of the fundamental pieces of information required for such processes, and is generally high at elevated temperatures. In order to measure the vapor pressure for chlorides, the apparatus for the transpiration method was assembled in the present study. The vapor pressure of ZnCl2 and FeCl2, which is related with the process of aluminum refining and the recovery of useful elements from iron and steel industry by-products, was also measured. In the measurement of vapor pressure by the transpiration method, the powder of ZnCl2 or FeCl2 in a alumina boat was loaded in the uniform zone of the furnace with a stream of Ar. The weight loss of ZnCl2 and FeCl2 after holding was measured by changing the flow rate of Ar gas (10 sccm -230 sccm), and the partial pressures of ZnCl2 and FeCl2 were calculated. The partial pressures within a certain range were found to be independent of the flow rate of Ar at different temperatures. The vapor pressures were measured in the temperature range of 758-901K for ZnCl2 and 963-983K for FeCl2. The measured results agreed well with those in the literature.

참외 발효과 발생에 영향을 미치는 증산과 관련된 몇 가지 요인을 검토한 결과는 다음과 같다. 참외의 증산율은 지온이 높고 토양수분 함량이 많을수록 높았으며, 광도가 약하여 온도가 낮을 경우 증산율과 기공 전도도가 낮아졌고, 저온 다습한 기상조건에 의한 증산의 억제는 식물체와 대기사이의 증기압기울기가 낮아지는 것으로 생각된다. 발효과 발생은 과실의 비대가 느린 착색기 이후에 토양수분이 -10 kPa로 많고, 저온 다습하여 참외와 대기 사이에 증기압기울기가 낮게 형성되어 증산이 억제될 때 발생하였다. 따라서 참외의 발효과 발생은 착색기 이후 참외의 과실 비대가 지연되는 반면 지온이 높아 뿌리로부터 지상부로 수분의 공급이 원활하고, 저온 다습한 기상조건하에 수분의 증산이 억제되어 수분이 태좌부로 유입되면 발효과가 발생되는 것으로 생각된다.

Adsorption process is largely influenced by pore structures of adsorbents and physical properties of adsorbates and adsorbents. The previous studies of this laboratory was focused on the role of pore structures of adsorbents. And we found some pores of adsorbates which have larger pore diameters than the diameter of adsorbate are filled with easily. In this study the effects of physical and chemical properties of adsorbates and adsorbents, such as pore size distribution, vapor pressure on adsorption were investigated more thoroughly at the concentration of adsorbate of 1000 ppm. The adsorption in the pore ranges of 2～4 times of adsorbates's diameter could be explained by space filling concept. But there was some condensation phenomena at larger pore ranges. The errors between the adsorbed amount of non-polar adsorbates and the calculated amounts by considering factors were found to be 44.46%, positively, and -142%, negatively. When vapor pressure is considered, the errors between the adsorbed amount of non-polar adsorbates and the calculated amounts were in the range of 1.69%～32.25% positively, and negatively -1.08%～-63.10%.