This study is to conduct the optimal design of the fluid mixing blades in the test fluid tank for sewage treatment process. The design was made with various shapes and angles of mixing blades. Fluid mixing blades in the tank are numerically analyzed with FLUENT V.13.0. Blade1 and Blade4 had the biggest fluid pressure difference of 8.1% around the blades. And, Blade1 and Blade3 had the least fluid pressure difference of 2.55%. The biggest turbulence kinetic energy of 12.5% existed around Blade1 and Blade4. Blade1 and Blade3 had the least turbulent kinetic energy difference of 4.8%. Blade4 is the optimal design shape due to the highest turbulent kinetic energy around the blades in comparison to the other cases.

본 연구에서는 해양플랜트설비 건조 현장에서 사용되고 있는 기존 고온 오일 플러싱 장비에 대한 성능개선을 위해 기존의 플 러싱 장치에 사용되던 오일에 질소가스를 혼합한 고온 오일 플러싱 시스템에 대하여 국제표준화기구 코드(ISO code)를 기준으로 이론적 연구를 수행하였다. 연구를 위해 오일-질소가스 혼합유체 플러싱 시스템 공정을 설계 후 청정성능에 영향을 주는 혼합유체의 혼합비율, 온도, 레이놀즈수 및 액상분율 등에 대한 공정모사 결과도 분석하였다. 그 결과 관 직경과 가스상의 체적분률이 일정한 상태에서 혼합유 체의 체적유량이 증가될수록 수평 유압배관 입출구의 액상분율 차이  값은 증가하게 되고 배관길이 방향의 위치에 따라 오일과 질 소가스 기포 사이의 상분포가 달라짐을 확인했다. 이러한 상분포의 변화는 오일-질소가스 혼합유체 플러싱 시스템의 청정성능에도 커다 란 영향을 줄 것으로 예상된다.

This study presents design, construction and testing of a immiscible two working fluids thermosyphon with water and FC-40 to prevent freezing of vehicle starting up at temperatures below freezing point of water. The two working fluids thermosyphon was experimentally investigated on the startup characteristics at low temperatures below 0°C and then the thermosyphon was stable during startup and operated reliable at temperature of –30°C. The testing also showed that the performance and characteristics of the two working fluids thermosyphon differ from the charging ratio and mixture ratio of the two working fluids.

The frozen start up characteristics of the two phase closed thermosyphon using water and FC 40 as working fluid to prevents dry out by freezing of water at the condenser when below zero operation condition has been tested and studied. The experimental data showed that the thermosyphon using immiscible 2 fluids thermosyphon start up successfully at a -30℃ cooling condition as melted water by inflow 2nd working fluid to the condenser.